Queclink güçlü ve çok yönlü Araç İzleme Cihazı Araç GPS İzleyici (GV300)

Queclink Powerful and Versatile Vehicle Tracking Device GV300

GV300 is a powerful GPS tracker designed for vehicle tracking applications. With superior receiving sensitivity, fast TTFF (Time to First Fix) and Quad band GSM frequencies 850/900/1800/1900MHz, its location can be monitored in real time or periodically tracked by a backend server or other specified terminals. The GV300 has multiple input/output interfaces that can be used for monitoring or controlling external devices. Based on the integrated @Track protocol, the GV300 can communicate with a backend server through the GPRS/GSM network to transfer reports of emergency, Geo-Fence boundary crossings, low battery, GSM cell ID, or scheduled GPS position as well as many other useful functions. System integrators can easily setup their tracking systems based on the full-featured @Track protocol.


Feature:
Wide operation voltage range 8 to 32V DC
Built in u-blox chipset with -162dBm tracking sensitivity, -148dBm autonomous sensitivity for fast TTFF and high accuracy
Low power consumption, long standby time with internal battery
Quad band GSM/GPRS frequencies 850/900/1800/1900MHz
Embedded full-featured @Track protocol
Multiple input/output interfaces for monitoring and controlling
Built in 3-axis accelerometer for power saving and motion detection
Built in GSM antenna
Built in or external GPS antenna
CE/FCC/PTCRB/Anatel certified

Specification:
GSM Specifications:
Frequency Quad band: 850/900/1800/1900MHz
Compliant to GSM phase 2/2+
-Class 4 (2W @ 850/900MHz)
-Class 1 (1W @ 1800/1900MHz)
GPRS GPRS multi-slot class 12
GPRS mobile station class B
RMS Phase Error 5 deg
Max Out RF Power 33.0dBm± 2dBm
Dynamic Input Range -15~-108dBm
Receiving Sensitivity Class IIRBER2%(-107dBm)
Stability Of Frequency <2.5ppm
Max Frequency Error ± 0.1ppm

GPS Specifications:
GPS Chipset uBlox All-In-One GPS receiver sensitive, fast and accurate
Sensitivity Autonomous: -148dBm
Hot start: -160dBm
Tracking: -162dBm
Position Accuracy Autonomous: <2.5m
SBAS: 2.0m
TTFF (Open Sky) Cold start: 30s average
Warm start: <30s
Hot start: <1.2s

Interfaces:
Digital Inputs Three digital inputs
One positive trigger for ignition detection
Two negative trigger inputs for normal use
Configurable Input One special input can be configured to negative trigger digital input or analog input (0-16V)
Analog Input One analog input (0.3-16V )
Digital Outputs Two digital outputs, open drain, 150mA drive current max.
Latched Digital Output One digital output with internal latch circuit, open drain, 150mA drive current max
Two-way Audio Two differential outputs; One single end input
GSM Antenna Internal only
GPS Antenna Built in or optional external GPS antenna
Indicator LED GSM, GPS and power
Mini USB Port Mini USB port for upgrading and debugging
Serial Port One RS232 serial port on 16 PIN Molex type connector, for external devices (GARMIN protocol support)

General Specifications
Dimension 80mm*49mm*26mm
Weight 71g
Backup Battery Li-Polymer 250mAh
Standby Time Without reporting: 58 Hours
5 minutes reporting: 33 Hours
10 minutes reporting: 45 Hours
Operation Voltage 8 to 32V DC
Operation Temperature -30 degree~+80degree(Without battery)
-40degree~+85degree for storage(Without battery)

Air Interface Protocol
Transmit Protocol TCP, UDP, SMS
Scheduled Timing Report Report position follow the pre-set fix interval and report intervals
Geo-Fence Geo-Fence alarm and parking alarm
Low Power Alarm Alarm when backup battery is low
Power On Report Report when the device is powered on
Tow Alarm With built in 3-axis accelerometer
Antenna Disconnect Alarm Alarm when the external GPS antenna is disconnected
Special Alarm Special alarm based on the digital/analog inputs
Remote Control Control the digital outputs through air interface protocol