Temel bilgiler.
Tip
Su geçirmez Rulo Malzeme
Malzeme
Bitumem & Polyester Rolll
Tavan Döşeme Tipi
Metal tavanlar
Yüzey İşlemesi
Rulo Kaplamalı
İşlev
Antistatik, Su geçirmez
Kullanım
Dış mekan, İç mekan
Ticari Marka
Hebei jinliu Chemical Fiber Co., Ltd
Ürün Açıklaması
Product Descriptionmanufacturer 4MM waterproof SBS bitumen torch surface with mineral grains inside nonwovens spunbond felt backside PE film for building construtction material
Face material:(PE film, fine sand, Mineral grains)
Middle layer
Scope of Application:
It is suitable for waterproof and moisture-proof of roof and underground of industrial and civil buildings, as well as waterproof projects of bridges, parking lots, swimming pools, tunnels and other infrastructures, especially for buildings in areas with high temperature or strong solar radiation.
Construction Application:
1. Base course requirements:
The base course must be flat, clean, dry, and the moisture content should be less than 9%. Then, the base course surface should be evenly painted with primer oil, and the construction can be carried out after it is dry. No primer oil is needed if the cold bonding construction is adopted. For the joints, holes, ditches, walls, pipes and corners, where the parts that are complex in shape, stress concentration and easy to cause leakage, reinforcement layer construction should be carried out.
2. Membrane paving sequence and direction:
The paving sequence of Membrane is high-span first, then low-span, the same height, far before the close, so as to avoid trampling and damage of paved roof due to transportation. The same plane shall be paved from the lower part, and the paving direction shall be parallel to the ridge when the roof slope is less than 3%; the paving shall be parallel or perpendicular to the ridge direction when the slope is between 3% ~ 15%; it shall be paved perpendicular to the ridge direction when the slope is more than 15%; it shall be parallel to the water flow direction of the overlap joint of the roof ridge; when it is perpendicular to the roof ridge, the joint shall be paved with the dominant wind direction.
3. Paving method:
a. Hot-melt method: the flame spray gun or other heating tools are used to evenly heat the bottom surface and the base course of the Membrane. When the asphalt on the surface begins to melt and appears black and bright, pave the Membrane while baking, and compact with the roller. At the same time, the flame size and speed should be adjusted to keep the asphalt temperature between 200~205°C. The overlap joint should be sealed with cold adhesive after the work.
b. Cold bonding method: the rubber scraper is used to evenly brush the cold adhesive such as high polymer modified asphalt adhesive or cold mastic on the surface of the base course, and the thickness is controlled to be uniform. The rubber roller is used to push the roll while paving the Membrane to eliminate air until it is compacted. When the ambient temperature is lower than 15°C, the hot-melt method should be used to treat the overlap joint and Membrane end.
4. Overlap joint treatment
When the long side is overlapped, the width of single layer waterproof in longitudinal and transverse direction shall be no less than 100mm, that of double layer shall be no less than 80mm; for short-side overlapped, that of single layer shall be no less than 150mm, and that of double layer shall be more than or equal to 100mm. At the same time, the bonding shall be uniform, and there shall be a small amount of surplus hot-melt asphalt or cold adhesive extruded and formed into strips.
5. Inspection and acceptance
After the completion of construction, detailed inspection shall be carried out to ensure that the waterproof surface is free from bulge, wrinkle, falling off and large shell lifting, so as to ensure the excellent waterproof effect of the project.
Instruction of Packing, Transportation and Storage:
1. Plastic tape is packaged in rolls.
2. Transportation and storage:
a. During storage and transportation, products of different types and specifications shall be stored separately and shall not be mixed.
b. Avoid exposure to the sunlight and rain. The storage temperature should not be higher than 50°C. Vertical storage can only be single layer, and no more than two layers during transportation.
c. During transportation, it is necessary to prevent tilting or transverse pressure, and cover with tarpaulin when necessary.
d. Storage period: under normal storage and transportation conditions, the storage period is one year from the date of production.
What is Geotextile Landscape fabric (Also Known as Geotextile Weed Fabric)?
The geotextile landscape fabric is used for landscaping, allowing water to pass through, and it is rolled. Landscape fabrics are used as physical barriers, such as weed barriers in gardens and planting beds. The fabric is placed between the plants/crops on the ground to form a barrier that allows air and water to pass through the fabric to promote plant growth. It can also act as a barrier to the growth of weeds and prevent them from rooting. The fabric can also block light and prevent weeds from germinating. Geotextile is a fabric used for landscaping, drainage, and engineering. These synthetic fabrics are also permeable, which means that gases and fluids can pass through them. This is why geotextile materials are used in situations where a barrier is required but the transfer of water and air must be able to pass through the barrier.
Geotextile landscape fabrics usually have a width ranging from 1 to 8 meters, and a length ranging from 50 to 200 meters, or even longer. The length, width, and thickness of the basic landscape plants are mainly determined by the size of your garden and the situation required! The cost varies from US$0.15 per square meter to US$0.8 per square meter, depending on factors such as raw materials and grammage density. Thicker fabrics usually last longer.
There are many alternatives to geotextile landscape fabrics, such as cardboard, newspaper, burlap, ground cover, and herbicides. However, these alternatives are usually short-lived and are harmful substances. Therefore, geotextile landscape fabric is still the most suitable. Geotextile landscape fabrics provide a physical barrier to weeds yet allow air, water, and nutrients through to plant roots. Spread the fabric over bare soil around trees and shrubs, overlap several inches of fabric at the seams.
Please note that almost all geotextile landscape fabrics can be covered with any type of mulch-such as gravel, wood chips, weeds, root barriers, etc.
Specifications
Company Profile Hebei jinliu Chemical Fiber Co., Ltd., formerly known as Shijiazhuang jinliu non-woven fabric Co., Ltd., was founded in 1998. It is located at No.1, Jinguang Avenue, Xinle Industrial Park, covering an area of 60000 square meters, with more than 300 employees. It is an enterprise specializing in the production of polyester linoleum base cloth, geotextile, root puncture resistant copper matrix and geomembrane. It is the practical education base of Hebei University of science and technology, and is the most popular in China Large waterproof material base cloth research, production, sales in one of the units. As a symbol of strength, our self-developed root resistant copper matrix and root puncture resistant waterproof membrane have won national patents and filled in the domestic gap. The company has obtained "quality management system", "environmental management system", "occupational health and safety management system" certification, is a safety production standardization enterprise, Hebei Province Science and technology-based small and medium-sized enterprises.
Hebei jinliu Chemical Fiber Co., Ltd. was established in 2012, invested in the most advanced (7m) wide filament linoleum base cloth production equipment in China and put it into production; in 2014, the second phase production line was put into operation, and the products were recognized by customers and guided the development of the industry. The products are sold to some countries in Southeast Asia, South Asia, Middle East, Eastern Europe and more than 20 provinces in China. With the promotion of "jinliu" brand in the industry, two new production lines of the company have been put into full operation by the end of 2017, and another production line will be added in June 2020, with the product quality reaching the top level in China.
We have the best professional and technical personnel and the most advanced nonwovens production line and testing equipment, closely follow the development of waterproof industry, master the application of the latest technology. Develop the latest and best products with the fastest speed, and research and develop products suitable for various projects according to the needs of users. In the process of product development and production, we have been pursuing zero defect of products. The company strictly adopts the whole process system management of quality control ISO9001 and ISO14001 to ensure the stability of product quality. From the purchase of raw materials to the delivery of finished products, we have gone through strict technical testing to strive for the perfection of products and ensure that the products are provided to customers with the best quality.
Jinliu people are determined to be a professional team serving customers forever. With scientific management and good faith as the enterprise tenet, jinliu people are willing to develop the market with high-quality products and enthusiastic service, so as to make our contribution to the rapid development of waterproof industry.
Corporate Philosophy: Golden Quality, Golden Commitment.
Factory Photos
Certifications
Why Choose Us
FAQQ1. Are you trading company or factory?
A: We are professional manufacturer engaged in research, development, production, sale and service of geosynthetics.
Q2. Is free sample available?
A: Yes, we are happy to send free samples of some items for quality evaluation. Please contact us to get the sample application process.
Q3. What is your delivery time?
A: Stock: 1-3 days in general. No stock: 7-15 days after samples confirmed. Please contact us to confirm specific delivery time based on your order quantities and requirements.
Q4. How is your production management and quality control system?
A: Quality is priority. We attach great importance to quality control from purchase of raw materials to finished products.
Q5. Can you do OEM or ODM order?
A: Yes, we can do both OEM and ODM for customers.
Q6. What are your terms of delivery?
A: We can accept EXW, FOB, CIF, etc. You can choose one which is the most convenient for you.
Q7. What is the payment way?
A: TT, Pay Later, West Union,Online Bank Payment.
Please contact us at any time if you have any questions. We'll add answers here for your further references. Thank you.
Adres:
No. 1, Jinguang Avenue, Xinle Industrial Park, Shijiazhuang, Hebei, China
İşletme Türü:
Üretici/Fabrika, Ticari Şirket
İşletme Aralığı:
Ambalaj ve Baskı, Endüstriyel Ekipmanlar ve Bileşenleri, Giyim ve Aksesuar, Kimyasallar, Tarım ve Gıda, Tekstil, Tüketici Elektroniği, İnşaat ve Dekorasyon
Yönetim Sistemi Sertifikasyonu:
ISO 9001, ISO 9000, ISO 14001, ISO 14000
Şirket Tanıtımı:
Hebei jinliu Chemical fiber Co., Ltd., dünya çapında ve yurt içi müşterilere jeotekstil, jeozon, polyester keçe ve tıkanmış bakır lastik tabanı üretiminde uzmanlaşmış, önde gelen jeosentetik üreticisi, tedarikçisi ve ihracatçısıdır. Şirketimiz 1998 yılında kurulmuştur ve 2016 yılında uluslararası bir ticaret şirketi kurulmuştur. Fikri mülkiyet korumasına değer veriyoruz ve birçok patenti var. Tıkalı bakır lastik tabanı üzerinde yaptığımız bağımsız araştırma ve geliştirme çalışmaları ulusal patenti aldı ve iç boşluğu doldurdu.
Şirket 1 No′lu, Jinguang Avenue, Xinle Industrial Park, Shijiazhuang City, Hebei Eyaleti′nde bulunmaktadır. 5000 milyon RMB′lık kayıtlı sermayeye sahip Çin. Pekin Şehri′ne 1 saat ve Tianjin ve Qingdao liman kentine çok yakın, Shijiazhuang tren istasyonu ve Zhengding uluslararası havaalanına kapalı. Trafik ve iletişim için çok kullanışlıdır. Şirketimizin 50′den fazla üretim hattı, güçlü üretim ve AR-GE kapasitesi vardır. Bu da dünya çapındaki müşterilerimizin taleplerini karşılamak için yüksek ürün kalitesini, daha kısa teslimat süresini ve rekabetçi maliyeti korumamıza yardımcı olur.
Üretim, araştırma ve geliştirme, tasarım, inşaat, danışmanlık, 20 yıldan uzun süredir yenilikçi jeosentetik ürünlerin çözümü. En gelişmiş üretim hatları ve test ekipmanlarıyla donatılmış 300′den fazla profesyonel personel ve 000, 25 metrekarelik üretim fabrikamız var. En kaliteli ürünler, profesyonel teknik ve satış ekibimiz, satış sonrası hizmetlerimizden sorumluyuz. Ürünlerimiz ISO9001, ISO14001, CE ve BV sertifikalarını ve SGS ve Intertek vb. testlerinde lider konumundadır. Şirket, Çin Nonwovens Association ve Çin Geosynthetics Engineering Association′ın üye şirketi olan sektörde iyi bir itibara sahiptir.
Ürünlerimiz otoyol, demiryolu, Su konserviliği, köprüler, tünellerde yaygın olarak kullanılmaktadır. yapay ada, ıslah mühendisliği, çöl arazi ıslahı, toprak çöpleri, petrol ve nadir bulunan mineral dökülmesi teknikleri, su ve toprak koruma ve çevre koruma uygulamaları. Jinliu şimdi İngiltere, ABD, Fransa, İsveç, İngiltere ve diğer ülkelerde 86′den fazla ülkeye etkili ve gelişmiş jeosinik ürün çeşidi sağladı. Endonezya, Brezilya, Filipinler, Tayland, Singapur, Maylasia, Suudi Arabistan, Kanada, Şili, Peru, BAE, Ekvador, Fas, Tanzanya, Sri Lanka, Avustralya, Rusya, Meksika vb. uluslararası pazarda mükemmel kalitesi ve mükemmel teknik hizmetleri ile geniş bir övgü alan.
Hebei JinLiu, müşterilerine sonsuza kadar hizmet veren profesyonel bir ekip olmaya kararlıdır. Ürün yeniliği, kalite güvencesi, müşteri memnuniyeti, iş ortaklarımıza uzun vadeli bağlılığımızdır. Su geçirmez endüstrinin hızlı gelişimine katkıda bulunmak için tüm müşterilerle bir araya gelen pazarı geliştirmeye hazırız. Samimi bir şekilde karşılarız, yerli ve yabancı müşteriler karşılıklı fayda sağlamak için bizimle samimi bir şekilde işbirliği yaparız.
Kurumsal felsefe: Altın kalite, altın bağlılık.