4600 sa 3 sn 2p ŞuPO4 26650 Pil Paketi (A123)

A123 4600mah 3s2p LiFePO4 26650 battery pack

Details:
3-cell 9.9v a123 battery pack using genuine a123 systems LiFePO4 cells, complete with jst-xh balance connector and female deans ultra plug.
This pack consists of six cells in total. Three cells are wired in series and connected in parallel to three additional series-wired cells to give a 3s2p pack with a total capacity of 4600mah. The pack should be charged as a 3-cell pack.
The pack layout is 2× 2x2 (refer to image).
This pack can be charged at a maximum of 20 amps through the deans ultra plug but should be balanced regularly for a long service life. A LiFePO4 compatible battery charger must be used, such as the graupner ultramat 14 plus.

Nominal pack voltage: 9.9v
Fully-charged pack voltage: 10.8v
Recommended cut-off voltage: 7.5v (2.5v per cell)
Minimum voltage: 6.0v (2.0v per cell)
Do not charge above 10.8v.

Specifications:
Capacity (mah): 4600
Dimensions (mm): 203x31x55
Pack configuration: 3s2p
Balance plug: Yes
Balance plug type: Polyquest
Continuous discharge (c): 30.0c
Continuous current (a): 138.0a
Burst discharge (c): 60.0c

Burst current (a): 276.0a
Maximum charge rate (c): 4.3c
Maximum charge rate (a): 20.0a
Discharge plug: Yes
Chemistry: LiFePO4
Weight: 497g (17.5oz. )

We can assemble battery packs according to your configurations. Custom design welcome!