Çok İşlevli Araç GPS İzleyici FL-2000g

Multifunction Car Tracker FL-2000G

Road Navigation
Map Software
GPS and GSM connectivity
Fuel Level Sensor

Multifunction Car Tracker FL-2000G

1. Basic Description

FL-2000G is a powerful GPS locator designed for vehicle tracking applications. With superior receiving sensitivity,
Fast first GPS fix and quad bands GSM frequency. It's location can be monitored in real time or periodically
Tracked by 7-24tracking server. FL-2000G has multiple input/output interfaces which can be used for monitorign
Or controlling extra devices. Typically has been integrated with Fuel level monitoring sensor, tempearture sensor,
RFID Reader, image camera and Nagivagtor MDT etc

Based on the integrated protocol, the FL-2000G can communicate with a 7-24tracking server via GSM/GPRS
Network to transfer different events reports, and extra device monitoring data, generate different management
Reports via the tracking platform like alarm reports, RFID card read records, Fuel consumption chart and statistic
Report, Engine ON/Off report, parking/stop reports.

2 Basic Characteristics

2.1 Advantages

Wide Operating Voltage range 9-36VDC
Built-in Ublox GPS chipset with -160dBm Tracking sensitivity
Low power consumption, long standby time with internal battery
Quad bands 850/900/1800/1900MHz GSM module
Embeded full feature tracking protocol
Multiple Input/Outputs interface for monitoring control
Built-in Movement sensor for power saving and towing detection
2 analogs inputs for external sensor
2 RS232 and 485 Ports
FCC/CE cerfitifed

3. Mechanical Features

The FL-2000G mainframe installation, the installer only needs to consider:

1) Get power supply from Vehicle which is necessary with permanent supply. Which
Means even with engine off, it still can get power supply from this connection;
2) Connect ACC wire to ignition switch signal wire. This wire has to be with Ignition
Status ON/Off status. And this wire is a must connection which will make fl-2000G
Work properly like data report interval, Sleep mode activate and deactivate etc.
3) Door status detection wiring. It should connect to the door signal wire which can
Reflect the door close/Open status.
4) For Door Lock/Unlock control, the extra relay will be necessary for installation.
Because FL-2000G only get Digital output control signal

4 Operational Basics

FL-2000G get sleep mode design which in purpose to save power consumption and Data Stream

When considered as not necessary to be active.

The module will enter sleep mode under two conditions:
1) Vehicle engine is off for more than 10Minutes 2) Device configuration has activated sleep mode.

FL-2000G has 2 stage sleep level:

1) Simple sleep:
In this level with GPS receiver to sleep, therefore it does not record or send any live
Co-ordinates but with I/O detection alive, the power usage also decreases allowing saving
Vehicle battery.

2) Deep Sleep:
In this sleep mode, both GPS receiver and GSM module will go to sleep. Module cannot
Receive any call or SMS, and will not update co-ordinates too. And the power consumption
Will go to be very low levels (15-20mA).
The user can configure a proper sleep mode according to individual favorites.

FL-2000G will exit sleep when any alarm events including ACC ON, Vibrations and Power tamper will wake device to normal
Working mode.

5. Tracking Platform