Temel bilgiler.
Hayır. Modeli.
YX CH 2408
Tip
Kurşun Asit Pil Şarj Cihazı
Delivery Time
Within 2 Days
Ürün Açıklaması
1. INTRODUCTION;
Power Input
Voltage 160 ~ 250VAC
DC Output
Voltage 13.8 VDC/Current 6A ~10A
Voltage 27.6 VDC/Current 6A ~10A
Voltage and Current logo on the panel.
Charge Mode
Float
Environment:
Ambient temperature -40° C ~ 50 ° C.
Relative humidity in used 90% MAX.
Protection
Fixed voltage, current limited, auto-feedback.
Fuse protected
Short-circuit protected.
Size:
160mm L * 147mmW * 41.5mm H.
2. OPERATION PROCEDURE
2.1 Make sure you are using the correct battery charger.
2.2 Check for correct input voltage on the battery charger.
2.3 Connect power to lines N & L.
2.4 The indicate LED marked "CHARGELAMP" on the panel should be illuminated when switch power on. The DC output voltage should be as follow: 13.8± 0.2VDC or 27.6± 0.2VDC
2.5 With power off, connect output terminals "+/ " to battery lead "+/ ".
CAUTION!
Terminal lug must properly and securely crimp on to wires and avoid shorted.
2.6 When Power is ON, The current will decrease as the battery charges.
2.7 "0 A" indicates the battery is fully charged.
2.8 Current limited circuits allow engine crankingand running in parallel with the charge alternator when needed.
2.9 Voltage sensing circuit automatically shut offthe power when the battery is fully charged.
3. DANGER
3.1 Potentially lethal voltages are present inside.
Do not open case and attempt any adjust or repair on this unit.
3.2 Ground terminal of charger must be take to earth well.
3.3 Avoid to place the charger in the environment such as high temperature, humidity, acid & alkali, Prevent from insolation, drench and caustic.
3.4 AC input voltage should fit the charger type. We suggest to install a protection device (such as MCCB) inter AC power and charger.
3.5 Never depart the charger.
3.6 Never change internal wiring of the charger.
3.5 Never adjust internal VRs of the PCB intentionally.
3.6 Routine-check of output voltage is necessary
3.7 This is not a power supply. Use only for batterycharging.
Installation size: 170 * 150*60 (cm)
Adres:
No. 68 Nanshan Road, Fu′an City, Fujian Province, China
İşletme Türü:
Üretici/Fabrika
İşletme Aralığı:
Elektrik ve Elektronik, Endüstriyel Ekipmanlar ve Bileşenleri, Hafif Sanayi ve Günlük Kullanım, Sağlık ve Tıp, Tüketici Elektroniği
Yönetim Sistemi Sertifikasyonu:
ISO 9001
Şirket Tanıtımı:
Şirket Profili
Fujian YuXing Electronic Appliance Co., Ltd, güç kaynağını değiştirme, jeneratör ve jeneratör parçaları, elektrikli sıcak torba gibi elektronik ev aletleri, masaj cihazı gibi sağlık ekipmanı konusunda profesyonel bir üreticidir. İki atölye vardır. Yurt içi birinci sınıf teknik içeriğe sahibiz. Ürünler ISO9001-2008, 3C, CE sertifikasını almıştır.
2002 yılında kuruldu. 6.16, 000 metrekarelik bir alanı kapsayan 2 milyon RMB′lık kayıtlı sermayeyle, 3 kıdemli mühendis dahil 50′den fazla çalışan; Finans Departmanı, personel departmanı, teknik departman, satış departmanı ve satın alma departmanı vb. ile
ürünlerimiz iyi kalite, makul fiyat ve iyi hizmettir. Hızlı gelişim sürecinde müşterilerimize en iyi ürün ve hizmeti sunmayı amaçlayan "bütünlük yönetimi, önce müşteri, bilimsel ve teknolojik yenilikler" konusunda her zaman destek oluyoruz, ve uzun vadeli karşılıklı olarak faydalı işbirliği, iyi niyet ve birlikte çalışarak mükemmel bir iş çıkarmak için yurt içinde ve yurt dışında müşterilerle birlikte çalışmaya kararlıyız!