Polymeric Junction Box 9 Outputs Junction Box Sealed Connections in Low Voltage Overhead Network Connections

• Özelleştirme: Mevcut
• Tip: bağlantı kutusu
• Yapı: Koruma
• Hayır. Modeli.: CDBS
• Teşkil: Tüm Paketli Tip
• Çalışma gerilimi: Düşük Voltaj
• Boyut: 285 mm x 295 mm x 65mm
• Uygulama Aralığı: Elektrik santralleri
• Kabuk Malzemesi: pc
• Kabuk Koruma Sınıfı: IP23
• Marka: smico
• Taşıma Paketi: kartonunu dışa aktar
• Teknik Özelikler: 285 mm x 295 mm x 65mm
• Ticari Marka: smico
• Menşei: Çin

Ürün Açıklaması

POLYMERIC BOX

The box is made of Polycarbonate with anti-UV and FR (flame retardant) additives. Ease of installation, does not require
terminals. The seals are made of rubber with additives for outdoor use. All our models comply with electrical, mechanical,
airtightness, UV, flame retardant tests, etc.

TECHNICAL CHARACTERISTICS OF THE CONDUCTOR BAR

The bar is made of copper alloy with a capacity of up to 200A, it allows the installation of connections of up to 16m2 of copper.Upon request, it prepares for larger sections. This system prevents accidental short circuits, guarantees the tightness of the connections, Cu or Al conductors can be used.

TECHNICAL CHARACTERISTICS

OF THE INSULATOR
mechanical properties
High Impact Strength ASTM D 4812. Tensile Strength ASTM D 638. Flexural Strength ASTM D790 Electrical Properties
Dielectric strength 14.9 Kv/mm ASTM D 149.

Busbars and derivation modules

Monopolar BDCS are installed on the cable, close to the pole. They have 01 power supply point for the phase and 4 derivation points, in addition to 3 points (electrically isolated from the first) for the cut.

CHARACTERISTIC TECHNIC
Material	Polycarbonate with anti-uv
Dimension	285mmX295mmX65mm
Bypass bar	copper alloy;322 Mm2 section for phases and 144M2 for neutral;
	6 connection points for phases and 11 for the neutral;
Busbar coating	epoxy resin (dielectric resistance 180kv / cm)
terminal protection	cable lugs with rubber plugs screw holes: strips of rubber plugs
hinges	2 hinges of the same material of the caia
lock	1 Allen Head Bolt
operating temperature	< = 90°C
fastening to the pole or vain	2 metal strap pins (post), 2 holes for headband (for span)
connection torque	2.6 N-m 8 23 IN-LG)
NUMBER OF RUSHES	9 SINGLE PHASE + 1 APV IN 370 / 220V SYSTEM
CABLE SECTION	POWER SUPPLY CABLE: UP TO 16mm2
	branch cable up to 16mm2
nominal load	60KW
maximum load	75KW
APPLICATION
Used as a single-phase and / or three-phase connection in low voltage in the air network,
for areas of high corrosion and high industrial contamination.

 

Semi-Automatic PET Bottle Blowing Machine Bottle Making Machine Bottle Moulding Machine PET Bottle Making Machine is suitable for producing PET plastic containers and bottles in all shapes.