Doğrulanmış işletme lisanslarına sahip tedarikçiler
Denetlenen Tedarikçi 1. The cooling cell pad is made from special paper with honeycomb structure. There are two types of wave heights: 5mm and 7mm, and the corrugation is 45° × 45° Interweaving. Adopt new-generation polymers and space crosslink technology for high water absorption, high water proof, mildew-resistance and long service life.
2. Large evaporate surface area, cooling efficiency more than 80%.
3. This cooling cell pad contains no surface active agents, absorbing water naturally, diffusing at high speed, with lasting effectiveness. A drop of water is completely diffused within4-5seconds, which is exceed the national specification standards. The height of natural water absorption is 60~70mm/5min; 200mm/hour, which is fully up to international industrial standards.
4. It contains no phenol or such chemical substances which are easy to cause skin allergies. It is non-toxic, harmless, green, safe, energy-saving, environmental protection, economical and applicable.
5. Galvanized sheet , aluminum panel , stainless steel optional.
| Product name | Cooling pads |
| Material | Kraft paper |
| Frame material | Aluminum alloy,plastic,ss,customizable |
| Thickness | 10cm/15cm |
| Height | 1.8m/1.5m/2.0m/2.2m |
| Angle of flute | 45 degree |
| Application | poultry house/pig farm/greenhouse |
Details:
Wet pad installed at one end of the greenhouse, the suction ventilator installed in the other end. When the air in greenhouse is needed to cool down, the control system of fan will start, the indoor air is forced out and build-up the negative pressure; At the same time, the water pump water the wet pad. The negative pressure cause the indraft through the wet pad , leading to evaporation and cooling, then the cold air flow through the greenhouse, absorb the indoor heat, so as to achieve the purpose of the circulating cooling.
Cooling pad Features:
1. Efficienct, energy saving:
Negative pressure ventilation cooling system using fan and cooling pad, achieve the water evaporation and coolinG, low power consumption, only one-tenth of the conventional air conditioning.
2. Ventilation
Under the mutual cooperation of the entire cooling system, the ventilation fans drain away heat and discharge gas.
3. Improve efficiency
Solve the workers' attention decline problem caused by muggy and oxygen deficiency.
4. Environmental and healthy
Using water as a refrigerant, no pollution in manufacturing and using process.The water cooling pad can lower the air humidity, also can clean dust and particles carried by outside air.
5. Strong applicability
Widely used in various crowded,large and heat area, or place where is easy to produce pollution, poorly ventilated spaces.
Such as textile workshop, garment workshop, injection workshop, metal factory, shoe factory, electronics factory, etc.
|
Evaporative cooling pad fan system
•Low pressure drop when wet, leading to lower operating costs •No water carry-over •Low scaling •Self cleaning •Strong and self supporting •Long life time •Low running costs •Quick and easy to install •Environmentally friendly •Consistant high quality |
|
|
The evaporative cooling pad: consists of specially impregnated and corrugated cellulose paper sheets with different flute angles, one steep (60 deg) and one flat (30 deg) that have been bonded together. This unique design yields a cooling pad with a high evaporation efficiency while still operating with a very low pressure drop. In addition scaling is kept to a minimum and no water carryover occurs due to the fact that the water is directed to the air inlet side of the pad. This is where most of the ration takes place. |
|
|
Cooling pad paper:it has high intensity structure,corrosion resistant,long service life.(MH cooling pad paper is from the Kiamusze City,thickness:100gsm,Width 600mm,7090,we use 84-88 pc paper.5090,about 120pcs paper).
The impregnation procedure :the cellulose paper ensures a strong self supporting product, with high absorbance, which is protected against decomposition and rotting and therefore increasing longevity.
|
|
|
The distribution pad: constitutes a vital part of a complete system and should always be ordered in combination with MH evaporative cooling pads. Placed on top of the cooling pad it ensures a uniform supply of the water to the cooling pad and minish the risk of dry spots.
|
|
|
One side black coating treatmeant: 2)Blacking coating cooling pad is nonporous and quick drying. It prevents algae and minerals from anchoring themselves into the substrate of the pad, so they fall off when dried. The black/green protective edge coating extends the life of the pad over that of non-treated pads. |
|
|
The evaporative cooling pad wall The aluminum alloy frame(1.3mm+_thickness) or the stainless steel and galvanized steel The inner pipe,water inlet and outlet are included.(25#,32#/50#,75# pipe) |
|
|
The complete evaporative cooling pad wall system includes outside pipe system,water filter,water tank,water pump,water supply and drainage kit. |
|
|
Our 7090 evaporative cooling pad is used in system where high efficiency is required.It can be used for many different cooling purposes but is particularly suitable for cooling of livestock buildings and greenhouses. |
|
Honey comb evaporate cooling pad is used in systems where high efficiency cooling is required for agricultural greenhouses and poultry farm. It can be used for many different cooling purposes but is particularly suitable for cooling of poultry farm buildings and greenhouses when higher air velocity is required.
Company Profile
Qingzhou Xinhe Greenhouse Gardening CO.,LTD located in Shandong Province, Qingzhou Xinhe Greenhouse Horticulture Co.,Ltd has focused on greenhouse designing, manufacturing and construction for over 12 years. In the passing years, Xinhe Greenhouse helps our customers from China and overseas markets build hundreds of different types of greenhouses for vegetable planting, flower planting and many other uses.
Doğrulanmış işletme lisanslarına sahip tedarikçiler
Denetlenen Tedarikçi 
