Araç İzleme için GPS Konum Belirleyicisi (GV100)

GSM/GPS Specifications
Frequency: Quad-Band: 850/900/1800/1900MHz
GPS Chipset: : MTK All-In-One GPS Receiver Sensitive, Fast and Accurate
Sensitivity: Autonomous: -148dBm
Hot start: -160dBm
Tracking: -165dBm
Position Accuracy: Without Aid: 3.0 m 2D-RMS DGPS: 2.5 m
TTFF (Open Sky): Cold start 35s average
Warm start <35s
Hot start <1.2 s
User Interfaces

Digital Inputs: 5 Digital Inputs. Three positive trigger and two negative trigger
Analog Input: 1 10bits Analog to Digital Converter
Digtal Outputs: 4 Digital Outputs. Negative trigger, Max output current 300mA
Relay Output: 1 Built-In Relay Output. Max output current 2A
Audio Connector: 2.5mm Earphone Jack for speaker and microphone
Power Connector: 4 Pin Molex Type Connector
GSM Antenna: SMA Type Connector
GPS Antenna: SMA Type Connector
Indicator LED: GSM, GPS and Power
Configuration Serial Port: dB9 Connector
Gerneral Specifications
Dimension: 120mm* 54mm * 25mm
Weight: 150g
Backup Battery: Li-Polymer 1400 mAh, 3.7V
Standby TIme: Without reporting: 120 to 150 Hours
5 minutes reporting: 50 to 60 Hours
10 minutes reporting: 70 to 80 Hours
Operation Voltage: 8 to 32V DC
Power Management: Fully Power Path management: Internal battery will not be used when external power is connected
Air Interface Protocol
Transmit Protocol: TCP, UDP, SMS

Scheduled Timing Report Report Position follow the pre-set fix interval and report interval
Geo-Fence Geo-Fence regions can be defined.
Low Power Alarm Alarm when backup battery is running out
Power On Report Report when the device is powered on
Tow Alarm With built-in motion sensor
Antenna Disconnect Alarm Alarm when the GPS antenna is disconnected
Special Alarm Special alarm based on the digital/analog inputs.
Remote Control Control the digital outputs through air interface protocol