Product Description
Brief introduction of Vertical Axial Flow Pumps:
A vertical axial flow pump is a large vertical pump device composed of inlet channel, impeller, guide vane and outlet channel, used for conveying large flow, low head liquid, widely used in agricultural drainage and irrigation, hydraulic engineering, power plant, salt plant, chemical industry and other industries.
The vertical axial flow pump is the typical single-stage, guide vane pump with high efficiency, large flow, low head and good cavitation resistance. The pump is installed vertically, covers a small area, the blade is adjustable, the performance parameters are adjustable, and is suitable for low water level conditions, the application range is very wide.
A wide range of high-quality materials deal with different medium: stainless steel SS304, SS316, SS316L, 904L, duplex stainless steel CD4MCu, 2205, 2507, Alloy 20, Hastelloy, Titanium, Monel, Nickel...
Applications of Vertical Axial Flow Pumps:
Vertical axial flow pumps are suitable for applications of big flow with low total head.
1. Agricultural drainage and irrigation;
2. Water supply and drainage of power station;
3. Urban flood prevention;
4. Urban water supply;
5. Water supply and drainage of docks;
6. Thermoelectricity station circulating water transferring;
7. Dock water level rising and lowering;
8. Aquaculture;
9. Saltworks draw water;
10. Salting out and low temperature crystallization of combined soda process;
11. Phosphoric acid, obtaining salt by evaporating seawater and other chemical industries.
12. Big flow with low total head.
13. Pump clean water,sewage water with small particles and chemical process fluids with small particles.
14. Salting out and low temperature crystallization of combined soda process.
Product Parameters
Parameters of Vertical Axial Flow Pumps:
| Flow rate: |
Q=250~55000(m³/h) |
| Total head: |
H=1.5~8 (m) |
| Speed: |
n=180~1450rpm |
| Fluid s.g.: |
γ ≤1.5 |
| Fluid temperature: |
T=0~180ºC |
| Fluid viscosity: |
ν ≤600(mm2/s) |
| Pump diameter: |
Ф250mm~1800mm |
Pump structure
Structure of the Vertical Axial Flow Pump:
1. Suction bell: The suction pipe of medium and small-sized vertical axial flow pump often adopts suction bell; while large-sized vertical axial flow pumps often adopt elbow or bell type suction channel, which guide the water to the impeller with minimum loss.
2. Impeller: The impeller is the main working part of vertical axial flow pump, which is composed of blade, hub, water guide cone, etc.
3. Impeller casing
4. Guide vane: the guide vane is located above the impeller, and its main function is to eliminate the rotational movement of water flow and reduce the head loss. At the same time, part of the kinetic energy of the flow can be converted into pressure energy.
5. Foundation ring
6. Middle tube
7. Shaft protecting sleeve
8. Pump shaft: Transmit torque to the impeller
9. Elbow
10. Bearings: reduce the friction coefficient of the pump shaft during rotation
11. Packing box: a packing sealing device is installed where the pump shaft passes through the outlet elbow.
12. Intermediate coupling: The connecting part between the vertical axial flow pump and the motor, which transmits the motor power to the pump
Detailed Photos
Pump features
Features of Vertical Axial Flow Pumps:
-
Optimized elbow passage of better hydraulic performance.
-
Adjustable impeller of high efficiency and wide high efficiency zone.
-
Slowly pump speed design conforms to the technological requirements of salting out and low temperature crystallization.
-
Vertical axial flow pumps are widely used in saltworks, obtaining salt by evaporating brine, composite alkali process, etc. Selecting corrosion-resistant materials and high-strength shafts to ensure smooth operation and long service life of vertical axial flow pumps. The diameter of suction bowl of the vertical axial flow pump is from 225mm to 3100mm, so it has a wide range of applications.
-
Specially designed to suit different applications. With the help of our professional engineers, special design could be carried out to increase the head, increase the guide vane body, and realize the function of a vertical mixed-flow pump; Wear resistant coating is added to the impeller for the medium containing corrosive and hard particles, so that the service life of the vertical pump is greatly extended. Increasing the system pressure and liquid level can achieve the purpose of forced circulation.
We have a long history of producing reliable operation, high efficiency, long lifetime and big diameter vertical axial flow pumps. Highly customized of vertical axial flow pumps, meet end users' requirements, as well as have lots of references of vertical axial flow pumps. For the installation of large equipment, also provide service for installation of vertical axial flow pump on site or remote technical instruction. A wide range of high-quality materials deal with different medium: cast iron, carbon steel, stainless steel SS304, SS316, SS316L, 904L, duplex stainless steel CD4MCu, 2205, 2507...
Based on CFD technology, Optimize pump hydraulic performance more efficiently.
Adopting the optimization algorithm provided by Isight, it integrates the functional optimization platform of 3D modeling software Catia, grid division software ICEM and numerical simulation software CFX.
Pump Configuration:
Company Profile
We have eight modernized workshops covering 12,000 square meters, which producing ability was designed as 18000 pieces per year. The factory consists of foundry workshop, finish-machining workshop, plate welding workshop, assembly workshop and testing center. The maximum lifting ability for tramelling crane is 50 metric tons; There are 510 sets of large and essential processing facilities which enable the requirements for producing all kinds of industrial pumps.
Casting of parts and components is an important part of the industrial pump production process. The precise control of the pump material smelting and the flow path size of the over-current components is our key control program for the quality of the pump products. The annual production capacity of 8,000 tons of alloy cast iron and dozens of new casting equipment such as AOD refining furnace and spectrum analyzer, as well as a group of skilled stylists, ensure the excellent quality of our castings.
HOT SELLING PUMPS
CERTIFICATES & PATENTS
TESTING
The comprehensive pump testing center. Make sure the quality control can be refined in the material inspection,components check,performance test.
PACKAGING
Product is packaged according to the customer's needs. Plywood boes are used according to international regulations.
Why choose us?
5 DECADES
Established in 1967, long history of pump making brings us rich experience, making us a professional pump manufaturer and ranking us as a famous pump factory in China.
500+ STAFFS
Well trained and professional engineers and workers guarantees the in time delivery and offers professional pump solutions to our clients.
96700m2 WORKSHOPS
Large and modernized workshops and facilities enables the efficient and strict QA&QC procedures and therefore assures the qualified products.
20+ BRANCHES
Established 20+ branches offices and subsidiaries throughout China, they offer closer and in time services to our clients. And our overseas customers are from different places of the world.
3000+ CLIENTS
Own more than 3000 clients both in China and overseas, which is an approval of our product quality and a praise of our service.
20+ PATENTS
Gained more than 20 patents, which is a strong proof of the ability of R&D and a backup of product quality.
FAQ
Q: How long is your factory history?
A: Our factory was established in 1967.
Q: How many staffs does your factory have?
A: We have around 500 staffs.
Q: What international certificates does your factory have?
A: We have API, CE, ISO9001...
Q: Does your factory have foundry for yourself?
A: We have our own two foundries in our factory.
Q: What after sales service your factory can provide?
A: Generally, most of the issues can be solved by free guidance of video calls. But paid site service is also available.
Q: What is your product warranty?
A: 12 months since commissioning or 18 months after shipment,whichever is earlier.
Q: What is your factory's annual output capacity?
A: Around 20,000 pcs of various type of pumps.
Denetlenen Tedarikçi 
