Yüksek Kapasiteli otoklav gazbeton tuğla

Introduction of Autoclaved Aerated Bricks:

1 Concrete Block Maker Machine Product weight is according to 600kg/m3 to control.
2 annual capacity 300, 000M3.
3 set raw material proportion: Cement 5%, raw lime 23%, flyash 68%, gypsum 3%, aluminum paste powder 350G/M3.
4 water and material rate 0.631
5 one mould product 2.88M3
6 Casting slurry cycle time 5-6 minutes, cut cycle time 5 minutes.
7 casting slurry temperature 38-42 degree
8 body quiet stop. Time is 1.5-2.5hours, temperature 50-90 degree, after quiet stop body strength is 0.15-0.18Mpa
9 Steam curing cycle time, come in and out autoclave about 0.5hour, steam curing cycle time about is 6 hours/1.6Mpa, total 5 hours.

Features of Autoclaved Aerated Bricks:

Autoclaved Aerated Bricks, also called Light Block, used siliceous (fly ash, sand, slag) and calcareous (lime & cement) as the main raw materials, which through the process of batching, pouring, curing, cutting, autoclaving, separating and packing to make into the final products. It is new type & environmental construction material and widely used for industry and civil building construction. AAC Block is the most mature technology of production and application in the worldwide nowadays.

Advantages of Autoclaved Aerated Bricks:

Autoclaved Aerated Bricks is Autoclaved Aerated Concrete. The blocks are made to aerate by creating a reaction between silica in base material such as fly ash or sand, active lime, and aluminum power. The block hardness is being achieved by cement strength, and instant curing mechanism by autoclaving. Gypsum acts as a long term strength gainer.
The Duyuen Equipment Manufacturing Co., Ltd line from 50, 000 CBM to 300, 000 CBM includes the following items:
1. Production equipments and Technology of the AAC Blocks process.
2. Special lay out for your factory and One year equipment warranty.
3. Transfer of know-how with the training in your site.
4. Set up and installation in the customer facility.