Super Wear Resistance Silicon Carbide Tiles/ Chute Wear Liners Rubber Ceramic Rbsic

• Standart: GB
• Uygulama: İnşaat Makineleri, Çimento Tesisi, Madencilik makinesi, Termal Elektrik Santrali, Kömür Yard
• Malzeme: silikon karbür
• Tip: Aşınmaya dayanıklı plaka
• renk: siyah
• "mod: 50 kg
• Hayır. Modeli.: Silicon Carbide Liners
• teslimat süresi: talebiniz üzerine 15 ila 25 gün
• örnekler: ücretsiz numuneler sağlanabilir
• yoğunluk: 3.02′den fazla
• görünür gözeneklilik: 0.1′in altında
• maksimum kullanım sıcaklığı: 1380
• mikroyapı: %87 sic, %12 si
• Taşıma Paketi: Safe Carton with Pallet
• Teknik Özelikler: thickness: 4-25mm
• Ticari Marka: Ultraming
• Menşei: China, Shandong, Zibo
• HS Kodu: 6909120000
• Üretim Kapasitesi: 18000 Tons/Years

Ürün Açıklaması

Super Wear Resistance Silicon Carbide Tiles/ Chute Wear Liners Rubber Ceramic RBSIC

Product Description

Property

>Superior wear resistance, impact resistance and corrosion resistance
>Excellent flatness and temperature resistance up to 1380ºC
>Excellent Oxidation Resistance
>Good dimensional Control of complex shapes
>Easy installation
>Longer service life(about 5 times more than that of alumina ceramic and 6 times more than that of polyurethane)

Applications
>As liners or parts in coarse particles classification, concentration,
>Wear resistant lining of hydraulic cyclones
>Flue gas desulphurization Pipes
>Coal slurry conveyor pipe lines
>Washing and mineral processing industry

Other RBSIC/SISIC Reaction Bonded Silicon Carbide Products
>Cross beams
>Rollers
>Coiling air pipe
>Burner nozzles
>Thermocouple protecting tubes
>Temperature measuring parts
>Radiant tubes
>Desulfurization nozzles
>Crucible
>Batts
>Wear Resistant material, plates, seals, rings, and special shaped structural parts
 

Product Parameters

Physical Property	Units	Typical Value
Microstructure	%	87%SiC, 12%Si
Density	g/cc	>3.02
Apparent Porosity	%	<0.1
Max Use Temperature	ºC	1380
Flexural Strength	MPa	250@220ºC, 280@1200ºC
Compressive Strength	MPa	2500
Modulus of Elasticity	GPa	330@220ºC, 300@1200ºC

Coefficient of Thermal Expansion	1x10-6in/inºC	4.5
Thermal Conductivity@1200ºC	W/mK	45
Poisson's Ratio	-	0.2
Vickers Hardness	GPa	20-22

Technical Specations
>Thickness: 4mm-25mm
>Shape Available: Tubes, Tee Pipes, Elbows, Cones, Rings and so on.

Detailed Photos

Company Profile

1.Established in 1997,25 years experience in wear solutions products.
2.Factory is under expanding, the total construction area is 50,000 sqm.
3.ISO9001:2015 certified,over350 staffs.
4.Three Own-designed production lines, the ball mils are own produced.

We supply a wide range of pre-engineered alumina ceramic tiles tailor-made to suit any type of application such as short and long radius small and large bore pipes and pipe bends, square to round transitions, cones etc. The company also supply and install a range of pump impellers, expeller rings, and valves.
QMX provides wear resistant solutions to all industries including Mining, Mineral , Base & Precious Metal Smelting, Power Generation (coal fired power stations), Iron and Steel, Cement & Lime Manufacture, and Petro-Chemical Refining and Production. 

Product Range

1. 92%,95%,T95%,99% Alumina ceramic tiles
2. ZTA(Zirconia Toughened Alumina) tiles/brick/block 
3. Ceramic Rubber and ceramic-Rubber-steel impact resistant liner
4. Monolihic Cyclone/ cyclone tiles/Ceramic Lined pipe fittings
5. High impact ceramic wearing compound 

FAQ

1. Are you are trading company or a factory? 
We are a leading factory, manufacturing high alumina ceramic wear resistant liners in Zibo, China 

2. What is your monthly capacity? 
500-650ton per month 

3. What kinds of ceramic wear resistant liners do you manufacture? 
92%alumina liner, 95%alumina liner, T95%alumina liner, zirconia tile liner, ZTA tiles , ceramic-rubber composite plates, wearing compound 

4. What is the delivery time? 
If we have stock, the delivery time is within 3days after order confirmed. If there is no stock, it is usually 13days. 

5. Can you manufacture ceramic liner according to customers' desgin? 
Yes, we have 5 engineers and we can produce ceramic parts according to the drawings of the customers. 

6. What is the packing? 
carton, and then wooden pallet or wooden box, 20~25tons per 1*20"FCL 

7. What is the nearest port? 
Qingdao port