20 Gözlü Cam Elektrikli Galvanize Demir Dokuma Kare Tel Mesh

• Material: Galvanized Iron Wire
• Hole Shape: Square
• Mesh Size: 1 Inch
• Surface Treatment: Galvanized
• Weave Technique: Plain Weave
• Application: Construction Wire Mesh, Protecting Mesh, Cages, Decorative Mesh
• Hayır. Modeli.: yq-w94
• Color: Silver
• Type: Welded Mesh
• Certification: ISO9001
• Condition: New
• örnek: serbest
• bağlantı noktası: tianjin
• Taşıma Paketi: Waterproof Paper
• Teknik Özelikler: 1/2"*1M*12M*12kg
• Ticari Marka: YAQI
• Menşei: China
• HS Kodu: 7314310000
• Üretim Kapasitesi: 200000 Square Meters/Week

Ürün Açıklaması

Kare Dokuma Tel Örgü Paslanmaz Çelik/Aliminum 2x2 3x3 4x4 10x10 Yağ alanında yaygın olarak kullanılan ağ

Ürün Açıklaması  

Sıcak daldırma galvanizli kaynak tel örgü

1.üretim:  
otomatik dijital kontrollü kaynak ekipmanlarıyla yüksek kaliteli düşük karbonlu çelik telden üretilmiştir. Kaynak işleminden sonra düz çelik tel ile kaynatılmıştır, ardından sıcak daldırmalı galvanizleme işlemi yapılır

2.Uygulamalar:  
Kaynak tel örgü endüstride, tarım, inşaat, taşımacılık, madencilik işlerinde kullanılır. balık tutma, kümes hayvanları, yumurta sepetleri, pist kabinleri, boşaltma rafı, meyve kurutma ekranı, çit vb.  

3.Çinko Kaplama Hat:  
Rulo halinde kaynaklı tel tel tel tel tel örgü için sıcak DIP galvanize Hat ve kaynaklı tel örgü paneller için sıcak DIP galvanize Depoya sahibiz. %99.0 saf çinko kullanarak, kaynak işleminden sonra sıcak daldırmalı galvanizleme işlemi, kaynakların kötü çevre koşullarına karşı tamamen korunmasını sağlar ve daha güçlü kaynak sağlar.  

4.Teknik Özellikler: (Talep edildiği gibi özel özellikler)
Rulo Genişliği: 24 inç, 36 inç, 1 metre, 48 inç, 72 inç, veya 84 inç  
Rulo Uzunluğu: 100 fit veya 150 fit

Düz dokuma Teknik Verileri
Doğrusal İnç başına mesh'ler	Tel çapı			Açıklık Boyutu		Açık alan, %
	İNÇ	mm		İNÇ	mm
1	0.135	3.5	0.865		21.97	74.8
1	0.120	3.0	0.880		22.35	77.4
1	0.105	2.5	0.895		22.73	80.1
1	0.080	2.0	0.920		23.36	84.6
3 / 4 inç	0.120	3.0	0.630		16.00	70.5
3 / 4 inç	0.080	2.0	0.670		17.01	79.8
2 × 2	0.120	3.0	0.380		9.65	57.8
2 × 2	0.105	2.5	0.395		10.03	62.4
2 × 2	0.080	2.0	0.420		10.66	70.6
2 × 2	0.063	1.6	0.437		11.10	76.4
2 × 2	0.047	1.2	0.453		11.50	82.1
3 × 3	0.080	2.0	0.253		6.42	57.6
3 × 3	0.063	1.6	0.270		6.85	65.6
3 × 3	0.047	1.2	0.286		7.26	73.6
4 × 4	0.080	2.0	0.170		4.31	46.2
4 × 4	0.063	1.6	0.187		4.75	56.0
4 × 4	0.047	1.2	0.203		5.15	65.9
5 × 5	0.047	1.2	0.153		3.88	58.5
5 × 5	0.041	1.0	0.159		4.01	63.2
6 × 6	0.063	1.6	0.104		2.64	38.9
6 × 6	0.047	1.2	0.120		3.04	51.8
6 × 6	0.035	0.9	0.132		3.35	62.7
8 × 8	0.063	1.6	0.062		1.57	24.6
8 × 8	0.047	1.2	0.078		1.98	38.9
8 × 8	0.035	0.9	0.090		2.28	51.8
8 × 8	0.032	0.8	0.093		2.36	55.4
8 × 8	0.028	0.7	0.097		2.46	60.2
10 × 10	0.047	1.2	0.053		1.34	28.1
10 × 10	0.035	0.9	0.065		1.65	42.3
10 × 10	0.032	0.8	0.068		1.27	46.2
10 × 10	0.025	0.63	0.075		1.90	56.3
12 × 12	0.041	1.0	0.042		1.06	25.4
12 × 12	0.035	0.9	0.048		1.22	33.2
12 × 12	0.032	0.8	0.051		1.29	37.5
12 × 12	0.028	0.7	0.055		1.39	43.6
12 × 12	0.023	0.58	0.060		1.52	51.8
14 × 14	0.032	0.8	0.039		1.52	29.8
14 × 14	0.025	0.63	0.046		0.99	41.5
14 × 14	0.023	0.58	0.048		1.22	45.2
14 × 14	0.020	0.5	0.051		1.30	51.0
16 × 16	0.028	0.7	0.035		0.89	30.5
16 × 16	0.023	0.58	0.040		1.01	39.9
16 × 16	0.018	0.45	0.045		1.14	50.7
18 × 18	0.020	0.5	0.036		0.91	41.1
18 × 18	0.018	0.45	0.038		0.96	48.3
20 × 20	0.023	0.58	0.027		0.68	29.2
20 × 20	0.020	0.5	0.030		0.76	36.0
20 × 20	0.018	0.45	0.032		0.81	41.0
20 × 20	0.016	0.40	0.034		0.86	46.2
24 × 24	0.014	0.35	0.028		0.71	44.2
28 × 28	0.010	0.25	0.026		0.66	51.8
30 × 30	0.013	0.33	0.020		0.50	37.1
30 × 30	0.012	0.30	0.021		0.53	40.8
35 × 35	0.012	0.30	0.017'		0.43	33.8
35 × 35	0.010	0.25	0.019		0.48	42.4
40 × 40	0.014	0.35	0.011		0.28	19.3
40 × 40	0.012	0.30	0.013		0.33	27.4
40 × 40	0.010	0.25	0.015		0.38	36.0
40 × 40	0.0095	0.24	0.016		0.40	38.4
50 × 50	0.009	0.23	0.011		0.28	30.3
60 × 60	0.0075	0.19	0.009		0.22	30.5
70 × 70	0.0065	0.17	0.008		0.20	29.8
80 × 80	0.0070	0.18	0.006		0.15	19.4
80 × 80	0.0055	0.14	0.007		0.17	31.4
90 × 90	0.0055	0.14	0.006		0.15	25.4
100 × 100	0.0045	0.11	0.006		0.15	30.3
120 × 120	0.0040	0.10	0.0043		0.11	26.6
120 × 120	0.0037	0.09	0.005		0.12	30.7
150 × 150	0.0026	0.066	0.0041		0.10	37.4
165 × 165	0.0019	0.048	0.0041		0.10	44.0
180 × 180	0.0023	0.058	0.0032		0.08	33.5
180 × 180	0.0020	0.050	0.0035		0.09	41.1
200 × 200	0.0020	0.050	0.003		0.076	36.0
200 × 200	0.0016	0.040	0.0035		0.089	46.0
220 × 220	0.0019	0.048	0.0026		0.066	33.0
230 × 230	0.0014	0.035	0.0028		0.071	46.0
250 × 250	0.0016	0.040	0.0024		0.061	36.0
270 × 270	0.0014	0.040	0.0022		0.055	38.0
300 × 300	0.0012	0.030	0.0021		0.053	40.1
325 × 325	0.0014	0.040	0.0017		0.043	30.0
325 × 325	0.0011	0.028	0.0020		0.050	42.0
400 × 400	0.0010	0.025	0.0015		0.038	36.0
500 × 500	0.0010	0.025	0.0011		0.028	25.0
635 × 635	0.0009	0.022	0.0006		0.015	14.5

 

İki dokunan Teknik Veriler
Öğeler	Mesh	Tel çapı (mm)	Açıklık (mm)	Malzeme (AISI)
SSTW01	250 × 250	0.040	0.063	SUS316
SSTW02	300 × 300	0.040	0.044
SSTW03	325 × 325	0.035	0.043	SUS316L
SSTW04	350 × 350	0.030	0.042
SSTW05	400 × 400	0.030	0.033
SSTW06	450 × 450	0.028	0.028
SSTW07	500 × 500	0.025	0.026

 

Düz Hollanda Dokuma Teknik Verileri
Gösterge	Mesh	Tel çapı	Geçen parçacıkların referans değerleri
40	10 × 64	0.55 × 0.42	260
50	12 × 75	0.45 × 0.35	220
80	24 × 110	0.35 × 0.25	160
100	25 × 140	0.28 × 0.20	100
120	30 × 150	0.25 × 0.18	80
140	35 × 180	0.20 × 0.16	70
160	40 × 200	0.18 × 0.13	60
180	45 × 220	0.16 × 0.12	56
200	50 × 250	0.15 × 0.11	50
240	60 × 300	0.14 × 0.09	45
260	65 × 320	0.13 × 0.08	36
280	70 × 400	0.125 × 0.07	34
300	80 × 700	0.11 × 0.039	32

 

Twilled Dutch Wing Teknik Verileri
Gösterge	Mesh	Tel çapı	Geçen parçacıkların referans değerleri
80II	20 × 250	0.28 × 0.2	38
120II	30 × 300	0.25 × 0.18	36
200II	50 × 500	0.14 × 0.11	34
320 I	80 × 700	0.11 × 0.08	32
320II	80 × 780	0.10 × 0.07	30
360	90 × 780	0.10 × 0.07	25
400 I	100 × 780	0.10 × 0.07	22
400II	100 × 900	0.10 × 0.063	20
500	120 × 1100	0.07 × 0.05	17
630	150 × 1400	0.063 × 0.04	16
650	180 × 1800	0.07 × 0.04	14
685	165 × 1400	0.063 × 0.032	13
795I	200 × 1400	0.07 × 0.04	12
795II	200 × 1800	0.05 × 0.032	10
850	2l0×1900	0.045 × 0.03	10
1000	250 × 2000	0.045 × 0.028	8
1125	280 × 2200	0.036 × 0.026	7
1225	300 × 2200	0.036 × 0.026	6
1280	325 × 2300	0.035 × 0.025	5
1600	400 × 2800	0.03 × 0.018	3

 

Ters Hollanda Dokuma Teknik Verileri
Mesh Sayısı Çarpıtma × otu	Tel Çapı mm Çarpıtma ×  otu	Tel Çapı İnç Çarpıtma ×  otu	Açık Alan %	Mikron Derecesi
63 × 18	0.4000 × 0.6000	0.0157 × 0.0236	60	220
107 × 20	0.2400 × 0.6000	0.0094 × 0.0236	58	210
170 × 40	0.2000 × 0.4500	0.0079 × 0.0177	58	130
132 × 32	0.2000 × 0.4000	0.0079 × 0.0157	55	105
171 × 46	0.1500 × 0.3000	0.0059 × 0.0118	54	85
290 × 75	0.0900 × 0.2000	0.0035 × 0.0079	53	55
615 × 102	0.0400 × 0.1600	0.0157 × 0.0063	41	42
615 × 130	0.0400 × 0.1300	0.0157 × 0.0051	49	22
720 × 150	0.0360 × 0.1000	0.0014 × 0.0039	54	17

 

Düz Hollanda Dokuma  Teknik Verileri
Gösterge	Mesh	Tel çapı	Geçen parçacıkların referans değerleri
40	10 × 64	0.55 × 0.42	260
50	12 × 75	0.45 × 0.35	220
80	24 × 110	0.35 × 0.25	160
100	25 × 140	0.28 × 0.20	100
120	30 × 150	0.25 × 0.18	80
140	35 × 180	0.20 × 0.16	70
160	40 × 200	0.18 × 0.13	60
180	45 × 220	0.16 × 0.12	56
200	50 × 250	0.15 × 0.11	50
240	60 × 300	0.14 × 0.09	45
260	65 × 320	0.13 × 0.08	36
280	70 × 400	0.125 × 0.07	34
300	80 × 700	0.11 × 0.039	32

 

Twilled Dutch Wing  Teknik Verileri
Gösterge	Mesh	Tel çapı	Geçen parçacıkların referans değerleri
80II	20 × 250	0.28 × 0.2	38
120II	30 × 300	0.25 × 0.18	36
200II	50 × 500	0.14 × 0.11	34
320 I	80 × 700	0.11 × 0.08	32
320II	80 × 780	0.10 × 0.07	30
360	90 × 780	0.10 × 0.07	25
400 I	100 × 780	0.10 × 0.07	22
400II	100 × 900	0.10 × 0.063	20
500	120 × 1100	0.07 × 0.05	17
630	150 × 1400	0.063 × 0.04	16
650	180 × 1800	0.07 × 0.04	14
685	165 × 1400	0.063 × 0.032	13
795I	200 × 1400	0.07 × 0.04	12
795II	200 × 1800	0.05 × 0.032	10
850	2l0 × 1900	0.045 × 0.03	10
1000	250 × 2000	0.045 × 0.028	8
1125	280 × 2200	0.036 × 0.026	7
1225	300 × 2200	0.036 × 0.026	6
1280	325 × 2300	0.035 × 0.025	5
1600	400 × 2800	0.03 × 0.018	3

 

Ters Hollanda Dokuma Teknik Verileri
Mesh Sayısı Çarpıtma × otu	Tel Çapı mm Çarpıtma ×  otu	Tel Çapı İnç Çarpıtma ×  otu	Açık Alan %	Mikron Derecesi
63 × 18	0.4000 × 0.6000	0.0157 × 0.0236	60	220
107 × 20	0.2400 × 0.6000	0.0094 × 0.0236	58	210
170 × 40	0.2000 × 0.4500	0.0079 × 0.0177	58	130
132 × 32	0.2000 × 0.4000	0.0079 × 0.0157	55	105
171 × 46	0.1500 × 0.3000	0.0059 × 0.0118	54	85
290 × 75	0.0900 × 0.2000	0.0035 × 0.0079	53	55
615 × 102	0.0400 × 0.1600	0.0157 × 0.0063	41	42
615 × 130	0.0400 × 0.1300	0.0157 × 0.0051	49	22
720 × 150	0.0360 × 0.1000	0.0014 × 0.0039	54	17