ECO mobilya Aksesuarları, mobilya Bağlantı parçası, alüminyum Aksesuarlar

ECO SERIES
PRODUCTS CAN BE SELL AS WHOLE COMBINATION OR SELL ALUMINUM ACCESSORIES
ECO Main Post:
Material: Aluminum
Shape: Oval
Standard length: 2.5M, 2.7M, 3M
Installation: Ceiling to Floor/ Wall to Floor
Remarks: Can be cut short or the top be cut into 45 degree angle upon request.
ECO 010 L-Nut:
Material: Aluminum
Fitting: C/W 2PCS M5*5 Set Screws
Installation: Insert the required 2PCS ECO010 L-Nut into the groove of the main post then fix the wall elbow to the main post and fasten the set screws with M2.5 allen key
Remarks: For floor to wall L- Shaped main pole, each wall to floor main post need 2 pieces.
ECO Sleeve:
Material: Aluminum
Fitting: 4PCS M5*12 Set Screws
Installation: Slot in the sleeve and slide it up to the ceiling or the wall to screws and bracket then fasten the 4 set screws with M2.5 allen key
Remark: For cover the space between the main post and ceiling, floor or wall.
ECO Aluminum Alloy Bracket
Material: Aluminum Alloy
Fitting: 2PCS M5*5 Set Screws
Wall to Floor Installation:
Step 1: Mount the ECO aluminium alloy brackets into top & bottom of the main post and fasten the set screws with M2.5 allen key.
Step 2: Put the main post vertical to the ground then mark out the position of the bracket with a pencil on the wall.
Step 3: Use a drill to bore two holes in the wall and put the plugs into the holes.
Step 4: Loosen the bracket with M2.5 allen key to separate the bracket from the main post and then mount the bracket with the wall plugs and screws.
Step 5: Attach the main post to the bracket which has been fixed to the wall then fasten the set screws with M2.5 allen key.
Ceiling to Floor Installation:
Step 1: Mount the ECO aluminium alloy brackets into top & bottom of the main post and fasten set screws with M2.5 allen key
Step 2: Turn 2 M6*45 set screws into the top aluminium alloy bracket
Step 3: Put the main post vertical to the ground
Step 4: : Adjust M6*45 set screws to press the ceiling until the main post stands firm.

ECO Shelf Holder:
Material: Aluminum
Fitting: 1PC ECO Shelf Holder Nut, 2PCS ECO Blocks, 2PCS M5*10 CKS Screws, 3PCS M4*16 Phillips Flat Head Tapping Screws
Installation:
Step 1: Assemble shelf holder to the ECO shelf nut and ECO blocks with M5*10 CSK screws
Step 2: Insert the nut and blocks into the outer groove of the main post then secure screws with M3 Allen key. Mark the position and ensure the shelf holders are on the same horizontal level.
Step 3: Place the shelf on the shelf holders and make sure it's horizontal before fasten the shelf to the holders with M4*16 phillips flat head tapping screws
Remark: Can be used for fix the shelf or drawer.
ECO Hanger Bar Holder:
Material: Aluminum Alloy
Fitting: 1PC ECO Hanger Bar Holder Nut, 2PCS ECO Blocks, 2PCS M5*12 CKS Screws.
Installation:
Step 1: Assemble the ECO hanger bar holder to hanger bar holder nut and ECO blocks with M5*12 CSK screws
Step 2: Insert the nut and blocks into the outer groove of the main post and secure the screws with M3 allen key. Mark the position and ensure the bar holders are on the same horizontal level
Step 3: Mount the hanger bar onto the holders.
Remark: Used to fix hanging bar

Melamine Board
1. Thickness: 12mm 18mm panel generally 25mm
2. Panel Banding: PVC banding edge of panel
3. Color: With Melamine paper faced: Warm white, maple, white pine, iron grey, white beech, walnut, red cherry, rainbow bar, red thread, chicken wing, red wood, black etc.
Remarks: Custom as customer's request