Poliimit Film/Bant/Pi Film/Kapton Film 6051, Elektrik yalıtımı için

• Uygulama: Yalıtkanlar, Elektrik bobini yalıtımı, Sarım teli kaplama yalıtımı, Elektrikli Taban, Kabuk, Motor, Anahtar taban plakası, Transformer and Printed Circuit
• Tip: Yalıtım Filmi
• Kimya: Organik yalıtım
• Malzeme: Polyimide
• Termal değer: H 180
• Maksimum Voltaj: 20 KV ~ 100 KV
• Hayır. Modeli.: Polyimide Film
• Sınıflandırma: Organik yalıtım Malzemesi
• Sertifika: ISO9001, CE, SGS
• Renk: Yellow, Golden
• Marka: Chr
• kalınlık: 0.025-0,2 mm
• genişlik: 5 mm - 1000 mm
• stil: Rolls, Tapes or Stripes
• çekme dayanımı: 135 mpa
• kullanım: Transformer, Motor and Printed Circuit
• çalışma sıcaklığı: -269-+260
• Taşıma Paketi: Carton and Pallet
• Teknik Özelikler: 0.025-0,2 mm
• Ticari Marka: CHR
• Menşei: China
• HS Kodu: 3920920000
• Üretim Kapasitesi: 5000kg/Day

Ürün Açıklaması

6051 Polyimide Film
Heat-resistance: H Class 180ºC

6051 polyimide film is synthesized by polymerizing PMDA and ODA in strong polar solvents through the process of forming film and imines treatment at high temperature.

It has excellent physical, chemical and electrical properties, atomic radiation resistant, solvent resistant, low & high temperature resistant (as low as -452°F(-269°C) and as high as +500°F(+260°C). Used in flexible printed circuits and as insulating materials of flat electric cables, electromagnetic wires and motors.

Thickness: 0.05mm, 0.075mm, 0.1mm
Width: as cusmomers request
Form: in rolls

Workshop:

Technical Data:

Number	Index	Unit	Standard
1	Density	g/cm3	≥1.4
2	Tensile Strength	MPa	≥100
3	Breakdown Voltage	KV/mm	≥30
4	Elongation	%	≥25
5	Volume Resistivity	ΩM/CM	1x10^7
6	Heat shrinkage rate	%	Less than 3.5-2.0
7	Dielectric strength	V/UM	≥100(20+/-5°C)

 

Property Name (Название свойста)	H Type Film (Пленка тип Н)
Appearance (Наружный вид)	Transparent or semi-transparent golden film with smooth and flat surface and without any needle cavities, bubbles or electrically conductive impurities. (Прозрачная или полупрозрачная золотистая пленка с гладкой ровной поверхностью без проколов, вздутий, электропроводящих включений.)
Thickness Nominal(um) (Номинальная толщина)	20.0	25.0	30.0	40.0	50.0	75.0	100.0	125.0	150.0	175.0
Thickness Tolerance(um) (Допуск толщины)	±3.0	±3.0	±3.0	±4.0	±5.0	±7.5	±10	±12.5	±15.0	±17.5
Width (mm) (Ширина)	6-1040						6-520
Length(m) (Длина)	1000±5					500±5	300±5		200±5
Tensile Strength MPa    ≥ (Прочность на растяжение)	140						120
Elongation at Rupture % ≥ (Удлинение при разрыве)	40						60
Dielectric Strength MV/m ≥ (Диэлектрическая прочность)	150						120
Surface Resistivity Ω.cm ≥ (Поверхностное удельное сопротивление)	1.0x10^13
Volume resistivity Ω   ≥ (Объемное удельное сопротивление)	1.0x10^15
Dielectric Constant (10^6H) (Диэлектрический коэффициент)	3~4
Dielectric Tangent(10^6H)  ≤ (Диэлектрический тангенс)	1.0x10^-3