Temel bilgiler.
Hayır. Modeli.
WMEP-131FRNC
Certification
CE, ISO, RoHS, GS
Taşıma Paketi
Anti-Static Box
Teknik Özelikler
10pcs/anti-static box
Ürün Açıklaması
1.25Gb/s 10Km CWDM SFP TransceiverWSP-01CXX-20Features:
- Up to 1.25Gb/s data links
- DFB laser transmitter
- PIN photo-detector
- Up to 20km on 9/125μm SMF
- Hot-pluggable SFP footprint
- Duplex LC/UPC type pluggable optical interface
- Low power dissipation
- Metal enclosure, for lower EMI
- RoHS compliant and lead-free
- Single +3.3V power supply
- Support Digital Diagnostic Monitoring interface
- Compliant with SFF-8472
- Case operating temperature : 0°C to +70°C
Applications
- Switch to Switch Interface
- Fast Ethernet
- Switched Backplane Applications
- Router/Server Interface
- Other Optical Links
Standard
- SFP+ MSA Compliant
- SFF-8472 reversion 9.5 compliant
- IEEE802.3-2005 compliant
- Telcordia GR-468-CORE compliant
- FCC 47 CFR Part 15,Class B compliant
- FDA 21 CFR 1040.10 and 1040.11,class1 compliant
- RoHS compliant
PRODUCT DESCRIPTIONS
- WSP-01CXX-20 optical transceivers are designed for optical interfaces for data communications with
- single mode fiber (SMF). The transceiver designs are optimized for high performance and cost effective to supply customers the best solutions for telecom applications.
FUNCTIONAL DIAGRAM
ABSOLUTE MAXIMUM RATINGS
Parameter | Symbol | Min | Max | Unit | Bote |
Supply Voltage | Vcc | -0.5 | 4.0 | V | |
Storage Temperature | | -40 | 85 | ºC | |
Relative Humidity | | 5 | 95 | % | |
Note: Stress in excess of the maximum absolute ratings can cause permanent damage to the module GERERAL OPERATING CHARACTERISTICS
Parameter | Symbol | Min | Typ | Max | Unit | Note |
Data Rate | | | | 1.25 | Gb/s | |
Supply Voltage | Vcc | 3.13 | 3.3 | 3.47 | V | |
Supply Current | Icc5 | | | 280 | mA | |
Operating Case Temp. | Tc | 0 | | 70 | ºC | WSP-01CXX-10 |
ELECTRICAL INPUT/OUTPUT CHARACTERISTICS- Transmitter
Parameter | Symbol | Min | Typ | Max | Unit | Note |
Diff. input voltage swing | | 120 | | 820 | MvPP | 1 |
Tx Disable input | H | VIH | 2.0 | | Vcc+0.3 | V | |
L | VIL | 0 | | 0.8 | |
Tx Fault output | H | VOH | 2.0 | | Vcc+0.3 | V | 2 |
L | VOL | 0 | | 0.8 |
Input Diff. Impedance | Zin | | 100 | | Ω | |
- Receiver
Parameter | Symbol | Min | Typ | Max | Unit | Note |
Diff. output voltage swing | | 340 | 650 | 800 | MvPP | 3 |
Rx LOS Output | H | VOH | 2.0 | | Vcc+0.3 | V | 2 |
L | VOL | 0 | | 0.8 | |
Note 1 TD+/- are internally AC coupled with 100Ω differential termination inside the module.Note 2 Tx Fault and Rx LOS are open collector outputs, which should be pulled up with 4.7k to 10kΩresistors on the host board. Pull up voltage between 2.0V and Vcc+0.3V.Note 3 RD+/- outputs are internally AC coupled, and should be terminated with 100Ω (differential) at the userSERDES. - OPTICAL CHARACTERISTICS
Parameter | Symbol | Min | Typ | Max | Unit | Note |
Operating Wavelength | λC | | XX | | nm | |
Ave. output power (Enabled) | Po | -8 | | -4 | dBm | 1 |
Extinction Ratio | ER | 9 | | | dB | |
RMS spectral width | Δλ | | | 3.5 | nm | |
Rise/Fall time (20%~80%) | Tr/Tf | | | 0.26 | Ps | |
Output Eye Mask | Telcordia GR-253-CORE and ITU-T G.957 compatible |
Note 1: Measure at 2^7-1 NRZ PRBS patternNote 2: Transmitter eye mask definitionNote 3: "XX" is: 27,29,31,33,35,37,39,41,43,45,47,49,51,53,55,57,59 and 61; "λ"is 7.5ReceiverParameter | Symbol | Min | Typ | Max | Unit | Note |
Operating Wavelength | | 1270 | | 1610 | nm | |
Sensitivity | Psen | | | -24 | dBm | 3 |
Min. overload | Pimax | -3 | | | dBm | |
LOS Assert | Pa | -35 | | | dBm | |
LOS De-assert | Pd | | | -26 | dBm | |
LOS Hysteresis | Pd-Pa | 0.5 | | 6 | | |
Note 1: Measured at 10.3125b/s with PRBS 2 ^31 - 1 NRZ test pattern.Note 2: 20%~80%Note 3: Under the ER worst case, measured at 10.3125 Gb/s with PRBS 2^31-1 NRZ test pattern for BER < 1x10^ -12Digital Diagnostic FunctionsWSP-01CXX-20 transceivers support the 2-wire serial communication protocol as defined in the SFP MSA. It is very closely related to the E2PROM defined in the GBIC standard, with the same electrical specifications.The standard SFP serial ID provides access to identification information that describes the transceiver's capabilities, standard interfaces, manufacturer, and other information.Additionally, SFP transceivers provide a unique enhanced digital diagnostic monitoring interface, which allows real-time access to device operating parameters such as transceiver temperature, laser bias current, transmitted optical power, received optical power and transceiver supply voltage. It also defines a sophisticated system of alarm and warning flags, which alerts end-users when particular operating parameters are outside of a factory set normal rangeThe SFP MSA defines a 256-byte memory map in E2PROM that is accessible over a 2-wire serial interface at the 8bit address 1010000X (A0h). The digital diagnostic monitoring interface makes use of the 8 bit address 1010001X (A2h), so the originally defined serial ID memory map remains unchanged. The interface is identical to, and is thus fully backward compatible with both the GBIC Specification and the SFP Multi Source Agreement.The operating and diagnostics information is monitored and reported by a Digital Diagnostics Transceiver Controller (DDTC) inside the transceiver, which is accessed through a 2-wire serial interface. When the serial protocol is activated, the serial clock signal (SCL, Mod Def 1) is generated by the host. The positive edge clocks data into the SFP transceiver into those segments of the E2PROM that are not write-protected. The negative edge clocks data from the SFP transceiver. The serial data signal (SDA, Mod Def 2) is bi-directional for serial data transfer. The host uses SDA in conjunction with SCL to mark the start and end of serial protocol activation. The memories are organized as a series of 8-bit data words that can be addressed individually or sequentially.Digital diagnostics for the WSP-01CXX-10 are Internally calibrated by default.Pin Definitions and FunctionsNote 1: The module ground pins shall be isolated from the module case.Note 2: This pin is an open collector/drain output pin and shall be pulled up with 4.7K-10Kohms to Host_Vcc on the host board.Note 3: This pin shall be pulled up with 4.7K-10Kohms to VccT in the module.Note 4: This pin is an open collector/drain output pin and shall be pulled up with 4.7K-10Kohms to Host_Vcc on the host board. In FC designated as RX_LOS, inSONET designated as LOS, and in Ethernet designated at Signal Detect.TYPICAL INTERFACE CIRCUITRecommended power supply filterNote: Inductors with DC resistance of less than 1Ω should be used in order to maintain the required voltage at the SFP input pin with 3.3V supply voltage. When the recommended supply filtering network is used, hot plugging of the SFP transceiver module will result in an inrush current of no more than 30 mA greater than the steady state valuePACKAGE DIMENSIONSOrdering Information
Part. No | Specifications |
Pack | Rate | Tx | P(dBm) | Rx | S(dBm) | Top | Reach | Other |
WSP-01CXX-20 | SFP | 1.25Gb/S | CWDM | -4~-8 | PIN | <-24 | 0~70ºC | 20km | DDM,RoHS |
WNO reserves the right to make changes to the product(s) or information contained herein without notice. No liability is assumed as a result of their use or application. No rights under any patent accompany the sale of any such product(s) or information.
Edition 2016-9-1
Published by Wuhan Neowave Optics Co., Ltd
Copyright © WNO
All Rights Reserved.
Adres:
Dinjie Modern Electromechnical Information Intubation Park, No.219 Guanggu No. 2 Road, Donghu New Technology Development Zone, Wuhan, Hubei, China
İşletme Türü:
Üretici/Fabrika, Ticari Şirket
İşletme Aralığı:
Elektrik ve Elektronik
Yönetim Sistemi Sertifikasyonu:
ISO 9001, ISO 14001
Şirket Tanıtımı:
Wuhan Neowave, ZTT Group′un bir yan kuruluşudur ve güzel Doğu Gölü, Wuhan, Çin′de yer alır. Neowave, başlangıcından bu yana Wuhan′ın güç kaynağı olarak teknolojik yeniliklere ve optik iletişim modülü bileşenlerinin AR-GE, üretim, satış ve servis sektörlerine odaklanan ve optik sektörün gelişmesine ayak uydurarak, müşterilerinin talep odaklı gelişime dayalı coğrafyasına, politikasına, yeteneklerine ve bilgi avantajlarına güvendi.
2017 yılında kalite, çevre ve mesleki sağlık ve güvenlik için üç yönetim sistemi sertifikasyonundan geçtik.
2018 yılında Hubei Eyaleti′nde yüksek teknoloji kurumsal sertifikasyon aldık.
Yıllardır süren endüstri deneyimi ve ZTT Group′un güçlü sermaye ve teknoloji geçmişiyle Neowave, ürünleri "önce müşteri, önce kalite" ilkesine göre geliştirir. Ürünler çoğunlukla yerli ve yabancı sistem ekipmanı üreticilerine, başlıca iletişim operatörlerine ve Internet içeriği hizmet sağlayıcılarına satılıyor, geniş bant veri, telekomünikasyon, veri merkezleri, mobil baz istasyonları, güvenlik izleme, akıllı şebeke ve savunma askeri ve diğer profesyonel alanlar.
Ekonomik küreselleşmenin arka planı altında Neowave, dünyaca ünlü bir optik iletişim cihazı çözüm sağlayıcısı olmaya kendini adamıştır. Profesyonel, özverili ve odaklanmalı; konsept olarak teknoloji LED′i, yeşil enerji tasarruflu konsept, dünyaca ünlü bir optik iletişim cihazı çözüm sağlayıcısı olmayı hedeflemektedir. Dünyaca ünlü marka ve yerli lider uluslararası kuruluşların inşa sürecini hızlandırın.