Cold Light Sheet Atmosphere Light Decorative Backlight Display Module EL Light Sheet Can Be Customized Cut Home Decoration

• LED Işık Kaynağı: Electroluminescence
• Yayılan Renk: Renkli
• 1 LED Güç: 0,3 W
• Güç: 1 W
• LED Çipler: OSRAM
• IP değeri: IP65
• Hayır. Modeli.: WFGD2981EL
• Su geçirmez: Su geçirmez
• ekran arka ışığı: lcd arka ışığı
• Instrument Backlight: Small Appliance Backlight
• led reklam panosu: Advertising Planning
• Luminous Gift: Luminous Jewelry
• Luminous Emoji Logo: DIY Toys and Gifts
• Mechanical Equipment Backlight: Luminescent Sheet
• Luminescent Sheet: Cold Light Film
• Luminous Logo: led arka aydınlatma
• ortam işığı: Ambient Light Decoration
• aydınlatma: led aydınlatma
• Custom LED Light Source: Irregular Light Source
• Shearable Light Source: Ultra-Thin Backlight
• Backlight Can Be Cropped: arka ışık
• Black and White Screen Backlight: ekran
• Highlight Display: Cold Light Plate
• Taşıma Paketi: Inner Packing Plastic Bag, Outer Packing Carton
• Teknik Özelikler: 100cm*80cm*0.5cm
• Menşei: China
• HS Kodu: 9001909090
• Üretim Kapasitesi: 800000

Ürün Açıklaması

EL backlight details
2. EL cold light film thickness: 0.8cm-3.2cm (plus border thickness), EL film thickness: 0.2-0.5mm
3. EL cold light plate working voltage: AC110V-240V,50-2000HZ; Small area EL light chip input DC9V-DC48V output 700HZ 110V
4. EL cold light plate energy consumption: 3mw/cm2
5. EL cold light film operating temperature: -40-65C
6. EL cold light film life: more than 10,000 hours
7. EL cold brightness: 40-160cd/m2
8. EL cold light is waterproof and can be placed in water to glow.
9. EL cool surface can be made matte and bright
10. Installation and use of EL cold light sheet: Use Velcro or double-sided tape to paste the light sheet on the wall during installation. You can also order the light sheet and hook with aluminum alloy frame or PVC backplane to hang on the wall. The power supply and the driver can be placed in the corner of the ground, and a slightly longer data cable (the connection line from the lamp to the driver) should be customized when ordering to ensure the placement and safety of the power supply and the driver. When in use, plug the output cable of the light-emitting piece into the output position of the driver (the EL piece below A2 and the aluminum alloy frame can be used as one), plug in the AC 220V switch to work.

EL cold light characteristics
1. It has very good advertising effect
2. Can be customized to different sizes, colors and luminous effects.
3. Very long life, more than 10,000 hours.
4. No pollution, no radiation, no damage to health, environment.
5. Passed international organization standards, such as CE, SGS, etc.
6. Built-in drive, plug-and-play effect.
7. Easy to use.
8. Waterproof effect
9. Thinner than LED, only 0.3mm
EL cold plate component characteristics
1. Driving voltage: AC and DC are used together, current: ≤0.15mA/cm2, voltage: 40V-220V, frequency: 200HZ-2000HZ
2. Can be bent, folded, cut arbitrarily, easy to install
3. Uniform luminous surface
4. Cold light, no heat, no UV damage
5. Ultra-thin: thickness ≤0.5mm
6. Low power consumption: power ≤0.8mW/cm2
7. Extremely light: 0.2g/cm2
8. Waterproof and high temperature resistant
EL backlight is through screen printing technology, several materials are partitioned printed on the PET transparent diaphragm, produced an ultra-thin light box sheet, the thickness of 0.3-0.5 mm, can be divided into regions flashing light new light box sheet. The product can be flat light, also can bend light, low power consumption, high visibility, long service life and other advantages have been widely used in various industries.
EL backlight, cold light, cold light box, backlight can be used for indoor and outdoor advertising, dynamic advertising, car advertising, airport advertising, subway advertising, light box advertising, gift advertising and other commercial advertising, not only to avoid the traditional light box form of a single, the screen can not beat shortcomings, but also can produce obvious advertising effect.
Focus on high quality EL cold light product development, production, welcome to sample customized.

Standard size has:
A1:841MM*594MM
A2:594MM*420MM
A3:297MM*420MM
A4:210MM*297MM
A5:148MM*210MM

FAQ
1. Can you give me a sample order of EL cold backlight?
2. A: Yes, we welcome samples to test and check the quality. Mixed samples are acceptable. You can also provide your sample or sample pictures to us. We will design EL cold light backlight according to your requirements.
1. Q2. EL cold light backlight delivery date?
A: It takes 10-15 days for samples and 1-3 weeks for mass production.
The third season. Is there a MOQ limit for your order?
A: MOQ, we can provide 1 sample for inspection.
The fourth quarter. How do you ship the goods and how long will it take you to arrive?
A: We usually ship by DHL, UPS, FedEx or TNT. It usually takes 3-5 days to arrive. Sea and air transport are also optional.
Q5. How to order EL cold backlight meter?
A: Please tell us your requirements.
We will offer the price according to your request or suggestion.
iii) Confirm the sample and place the official order.
iv) We will arrange production.
Q6. Can my logo be printed on EL cold backlight watch products?
A: Yes, please confirm the sample and inform us formally before production
Q7: How do I handle the fault?
A: Our products are produced under a strict quality control system with a defect rate of less than 0.1%.
During the warranty period, we will have a small number of new orders to replace the EL cold backlight. For unqualified bulk goods, we will repair and send them to you again, or we can discuss solutions according to the actual situation, including recall.
Do you offer a warranty on the product?
A: Yes, our products have a 1-year warranty.