Doğrulanmış işletme lisanslarına sahip tedarikçiler
Denetlenen Tedarikçi Products Introduction:
The joint bearing is a spherical plain bearing. The basic type is composed of an inner and outer ring with a spherical sliding spherical contact surface. The joint bearing is mainly composed of an inner ring with an outer sphere and an outer ring with an inner sphere, which can bear a large load. According to its different type and structure, it can bear radial load, axial load or radial and axial combined load. Because the outer sphere of the inner ring is inlaid with composite material, the bearing can produce self-lubrication in operation. Generally used for low speed swing motion, but also in a certain Angle range of tilt motion, when the supporting shaft and shaft shell hole concentricity is large, it can still work normally. Self-lubricating joint auxiliary should be used in water conservancy, professional machinery and other industries. Because the spherical sliding contact area of joint bearings is large, the inclination Angle is large, but also because most of the joint bearings adopt special processing methods, such as surface phosphating, galvanizing, chrome plating or outer sliding surface lining, insert pad, spraying, etc. Therefore, it has a large load capacity and impact resistance, and has the characteristics of corrosion resistance, wear resistance, self-aligning, good lubrication or self-lubrication without lubrication dirt pollution, even if the installation dislocation can work normally. Therefore, joint bearings are widely used in low speed swing motion, tilt motion and rotary motion. 
| Material | Outer Shell: Carbon Steel; Inner Ball: Bearing Steel |
| Thread Type | Female thread/ Internal thread/ Hollow thread; Left-hand / right-hand thread. |
| Surface Treatment | Forging/ Machining; Zinc, brass, chrome, nickel plating. |
| Model No. |
PHS5,PHS6, PHS8, PHS10, PHS12, PHS14, PHS16, PHS18, PHS20, PHS22, PHS25, PHS28, PHS30. POS5, POS6, POS8, POS10, POS12, POS14, POS16, POS18, POS20, POS22, POS25, POS28, POS30. SI5T/K,SI6T/K, SI8T/K, SI10T/K, SI12T/K, SI14T/K, SI16T/K, SI18T/K, SI20T/K, SI22T/K, SI25T/K, SI28T/K, SI30T/K. SA5T/K,SA6T/K, SA8T/K, SA10T/K, SA12T/K, SA14T/K, SA16T/K, SA18T/K, SA20T/K, SA22T/K, SA25T/K, SA28T/K, SA30T/K. SI5E,SI6E,SI8E, SI10E, SI12E, SI15ES, SI17ES, SI20ES, SI25ES, SI30ES, SI35ES, SI40ES, SI45ES, SI50ES, SI60ES, SI70ES, SI80ES. SA5E,SA6E, SA8E, SA10E, SA12E, SA15ES, SA17ES, SA20ES, SA25ES, SA30ES, SA35ES, SA40ES, SA45ES, SA50ES, SA60ES, SA70ES, SA80ES. |
maintenance :
There are several common types of rod end joint bearing maintenance
Regular maintenance: in order to ensure the normal operation of the main engine, according to the requirements of the main engine and bearing design theory and application experience, set a maintenance cycle, regular maintenance.
Fault maintenance: when the bearing has trouble, stop the machine for inspection and maintenance.
Early warning maintenance: the application of advanced bearing fault diagnosis technology, the use of bearings to stop real-time monitoring of the state, in the bearing attack before the warning, stop maintenance.
In the running process of bearings, there must be sound, temperature and vibration phenomena. Therefore, about the maintenance and maintenance of bearings in operation, abnormal changes of bearings can be found by listening, touching, observing and using bearing fault diagnosis instruments, and according to the state of change, the rod end joint bearing can be in normal working state.
Doğrulanmış işletme lisanslarına sahip tedarikçiler
Denetlenen Tedarikçi 
