Temel bilgiler.
Kind
Digital Oscilloscope
Application
Magnetic Field Measurement, Impedance Measurement, Electric Power Measurement
Deeper Memory Depth
60MHz
Ürün Açıklaması
Hantek MSO5062D 2 Channels External Portable LCD Deep Memory 60MHz Bandwidths Digital Storage16 Channels Logic Analyzer oscilloscope
Feature:
200/100/60MHz bandwidth1GSa/s Real Time sample rateLarge (7.0-inch) color display,WVGA(800x480)Record length up to 1MTrigger mode: edge/pulse width/line selectable video/slop/overtime etc.USB host and device connectivity, standardMultiple automatic measurementsFour math functions, including FFTs standardVGA Optional
Function Picture:
Parameters
Model | MSO5202D | MSO5102D | MSO5062D |
Acquisition |
Sample Rate | Real-Time Sample: 1GS/s |
Acquisition Modes | |
Normal | Normal data only |
Peak Detect | High-frequency and randon glith capture |
Average | Waveform Average, selectable 4,8,16,32,64,128 |
Inputs |
Inputs Coupling | AC, DC, GND |
Inputs Impendance | 1MΩ±2% II20pF±3pF |
Probe Attenuation | 1X, 10X |
Supported Probe Attenuation Factor | 1X, 10X, 100X, 1000X |
Maximum Input Voltage | CAT I and CAT II: 300VRMS (10×), Installation Category; CAT III: 150VRMS (1×); Installation Category II: derate at 20dB/decade above 100kHz to 13V peak AC at 3MHz* and above. For non-sinusoidal waveforms, peak value must be less than 450V. Excursion above 300V should be of less than 100ms duration. RMS signal level including all DC components removed through AC coupling must be limited to 300V. If these values are exceeded, damage to the oscilloscope may occur. |
Horizontal |
Sample Rate Range | 500MS/s--1GS/s |
Waveform Interpolation | (sin x)/x |
Record Length | 1M |
SEC/DIV Range | 2ns/div to 40s/div, | 8ns/div to 40s/div |
Sample Rate and Delay Time Accuracy | ±50ppm(at over any ≥1ms time interval) |
Position Range | 2ns/div to 8ns/div; (-8div x s/div) to 20ms; | 20ns/div to 80us/div; (-8div x s/div) to 40ms; 200us/div to 40s/div; (-8div x s/div) to 400s; |
Delta Time Measurement Accuracy (Full Bandwidth) | Single-shot, Normal mode:± (1 sample interval +100ppm × reading + 0.6ns); >16 averages:± (1 sample interval + 100ppm × reading + 0.4ns); Sample interval = s/div ÷ 200 |
Vertical System |
Vertical Resolution | 8-bit resolution, all channel sampled simultaneously |
Position Range | 2mV/div to 10V/div |
Bandwidth | 200MHz | 100MHz | 60MHz |
Rise Time at BNC( typical) | 1.8ns | 3.5ns | 5.8ns |
Offset Range | 2mV/div to 20mV/div, ±400mV 50mV/div to 200mV/div, ±2V 500mV/div to 2V/div, ±40V 5V/div to 10V/div, ±50V |
Math | +, -, *, /, FFT |
FFT | Windows: Hanning,Flatop,Rectamgular,Bartlett,Blackman; 1024 sample point |
Bandwidth Limit | 20MHz |
Low Frequency Response (-3db) | ≤10Hz at BNC |
DC Gain Accuracy | ±3% for Normal or Average acquisition mode, 10V/div to 10mV/div; ±4% for Normal or Average acquisition mode, 5mV/div to 2mV/div |
DC Measurement Accuracy, Average Acquisition Mode | When vertical displacement is zero, and N ≥16:± (3% × reading + 0.1div + 1mV) only 10mV/div or greater is selected; When vertical displacement is not zero, and N≥16: ± [3% × (reading + vertical position) + 1% of vertical position + 0.2div]; Add 2mV for settings from 2mV/div to 200mV/div; add 50mV for settings from 200mV/div to 10V/div |
Volts Measurement Repeatability, Average Acquisition Mode | Delta volts between any two averages of ≥16 waveforms acquired under same setup and ambient conditions |
FAQ
A: Payment Terms:
T/T, Western Union, Paypal, Bank Transfer
B: Shipment:
1. By EMS, DHL, FedEx, TNT, UPS or other express.
2. By your own forwarding agent.
3. Buyer can choose the desired shipping method when ordering.
C: After-sale service:
All products have been checked and packaged in good condition before dispatch.
D: Lead Time:
After the payment, general orders will be delivered from our factory within 3-5 working days.
Customers Service
Please contact us through email or phone, we will assist you in any way possible
China working hours 9:30-18:30 Monday-Friday online service to help buyers solving problem.
Welcome the friends from all over the world to visit us !
Adres:
607, Block A, Electric &Technology Building, Middle Shennan Road, Shenzhen, China
İşletme Türü:
Üretici/Fabrika
İşletme Aralığı:
Elektrik ve Elektronik
Yönetim Sistemi Sertifikasyonu:
ISO 9000
Şirket Tanıtımı:
Şirketimiz farklı türde ürünler sağlamaktadır. Yüksek kalite ve uygun fiyat. Sorgularınızı almaktan mutluluk duyuyoruz ve en kısa sürede tekrar geleceğiz. Yönetim için "önce kalite, önce hizmet, sürekli gelişim ve müşterileri karşılamak için yenilik" ve kalite hedefi olarak "sıfır hata, sıfır şikayet" ilkesine bağlı kalırız. Hizmetimizi mükemmelleştirmek için, uygun fiyata, ürünlerin kalitesini iyi sunuyoruz.