Temel bilgiler.
Ağ Sitesi
Ara Düğüm Yönlendiricileri
Güvenlik Duvarı
Güvenlik Duvarı
Bağlantı Noktası Yapısı
Modüler
Performans
Hat dışı Hız Yönlendiricisi
Mimari
Çoklu Veri Yolu Çoklu CPU
Teknik Özelikler
250mm(L) * 250mm(W) * 75mm(D)
Ürün Açıklaması
JATONTEC 6100D is a cost effective and high performance 450MHz FDD LTE outdoor CPE designed to enable quick LTE fixed data service deployment to the remote customers. It provides high data throughput and advanced networking features to end users who need both bandwidth and quality service in the remote area.
Feature Highlights
Cost effective & compact design with built-in LTE MIMO antennas.
Compliant to 3GPP LTE Release 9
Advanced 2x2 MIMO and UL QAM64 support (CAT5)
Router, bridge and by-pass networking, IPv4 & IPv6 and Multiple PDN support
USPasteIM card authentication support
Secure Telnet, FTP, HTTP and TR069 OTA management support
48V PoE power supply and pole or wall mounting support
RELIABLE PERFORMANCEJATONTEC 6100D is designed to meet the stringent operation environment for outdoor CPE devices. The device can safely operate in a wide temperature ranging from -40 to +55 degree and meets industrial IP67 water and dust proof standard requirements. The device MTBF time is expected to be above 80,000 hours. Depending on the network configuration and DL/UL split ratio configuration, the unit can provide up to 115Mbps max throughput over the air. The typical coverage should be more than 20km with reasonable good throughput performance.
EASY USAGE & MANAGEMENT
JATONTEC 6100D is a user-friendly LTE CPE that is easy to install and maintain. The unit is fully integrated and comes with all the necessary device drivers pre-loaded. Subscribers just connect the device to their computer or home switch/router and the device is ready to offer an experience of surfing over Internet. The LEDs on the JATONTEC 6100D have also been designed for user convenience, and offer a clear sign of what the device is doing. The IP addresses can be dynamically obtained via DHCP.
JATONTEC 6100D offers rich management features which facilitate the task of carrier. It supports local management access, Telnet, Http, Https and standard TR069 remote OTA management including device configuration, monitoring, and upgrades management.
TECHNICAL FEATURES
JATONTEC 6100D design is based on the standard implementation of LTE release9 specification. It is able to meet the most demanding requirements of large service providers with high throughput and availability. JATONTEC 6100D is a CAT5 CPE and supports advance features such as 2x2 DL MIMO, optional QAM64 modulation on the uplink.
With high gain directional patch antenna, JATONTEC 6100D enables a longer reception range from the base station. This yields more efficient use of the network with a larger cell reach, guaranteed carrier class service, and customer service probability. Advanced Orthogonal Frequency Division Multiplexing (OFDM) modulation enhances performance in non-line-of-sight (NLOS) conditions to ensure immunity to interference and multi-path conflicts typical of deployments in densely populated urban areas. Moreover, sophisticated QoS capabilities ensure true end-to-end QoS and support high quality data services.
JATONTEC 6100D also has built-in router function and VPN (PPTP, L2TP, GRE) client support to provide greater service flexibility and reliability. The standard PoE support, easy-to-read signal strength and data activity indicators in the back panel make it intuitive for users to install and check the status of the device.
LTE RADIO INTERFACE
Radio Access : 3GPP Release 9, Category 5
Operation Mode : FDD
Frequency Band : B31
Channel BW : 5/10/20MHz
MIMO Support : 2Rx, 1Tx,DL 2*2 MIMO, Optional UL QAM64
Max Tx Power : 23 dBm
Antenna Gain : 6 dBi
PHYSICAL & ENVIRONMENTAL
Power DC : 48V/0.5A PoE <15W
Weight : <2.5Kg
Dimensions : 250mm (L) * 250mm(W) * 75mm(D)
Environment : Operating Temperature, -40ºC~55ºC. Humidity, 95% max Non-condensing
Water Protection : IP 67
USER INTERFACE
Data Interface : 1 RJ45 10/100 ETH Port
LED Indicator : PWR, SYS, NET, SIM, ETH, RF (5 Signal intensity LEDs)
SIM Card : Single SIM card slot (2FF)
CONFIGURATIONS & MANAGEMENT
Network configuration:
DHCP or Static IP address Assignment
Bridge and Router Operation Support
Built-in DHCP Server for LAN Devices
IPv4, IPv6 DS-Lite Support
Multiple PDN interface support
SIM card locking feature
Network selection and cell locking provision
Data Networking Features:
VPN Pass-through support (PPTP, L2TP & IPsec)
Built-in L2TP & GRE Tunneling L2/L3 client support
Firewall & Access Control
Firewall & access controlled and virtual server support
IP and Port Filtering Support
Local and Remote Management Restriction
Application Firewall Support
LAN Device Access Control
DMZ and virtual server support
NTP service support.
Device Management:
CLI, secure Telnet and web management interfaces
Standard TR-069 management
OTA upgrade support (http, ftp, and TR069)
Dual Image bank support for safe upgrade,
Device factory default setting
Adres:
Zhuguang Industrial Park, Xili Town, Nanshan District, Shenzhen, Guangdong, China
İşletme Türü:
Üretici/Fabrika, Ticari Şirket, Grup Şirketi
İşletme Aralığı:
Elektrik ve Elektronik, Metalurji, Maden ve Enerji
Yönetim Sistemi Sertifikasyonu:
ISO 29001
Şirket Tanıtımı:
Shenzhen Jaton iletişim teknolojisi Co., Ltd, mobil geniş bant iletişim ekipmanı araştırması ve yüksek teknoloji firmalarının üretiminde çalışan bir profesyoneldir. Şu anda TD-LTE veri modülü, FDD veri modülü, WiMAX veri modülü, iç mekan CPE, dış mekan CPE, LTE baz istasyonu ve MIFI zaten piyasaya sürülmeye başladı. Artık müşterilerimize yalnızca genel değil, aynı zamanda özelleştirilmiş ürünler ve çözümler de sunuyoruz.
Jaton pazar trendlerini yakından takip edecek, sürekli yenilik ve gelişmiş ürün teknolojisiyle kademeli olarak uluslararası pazara doğru ilerleyecek, dünyanın en iyi 4G veri terminali OEM/ODM tasarımcısı ve üreticisi olmayı hedefleyecek.