Kompakt Tam Otomatik Kesme sızdırmazlık Sayımı Dolum Kesme Makineleri

• Type: Piston Filling Machine
• Automatic Grade: Automatic
• Material Type: Liquid
• Filling Valve Head: Multi-Head
• Feed Cylinder Structure: Multi-Room Feeding
• Dosing Device: Capacity Cup
• Filling Principle: Pressure
• Packaging Container Lifting Structure: Chute Pneumatic Combination Lifting
• Structure: Linear
• Packaging: Bag
• Packaging Material: Plastic
• Length of Finished Bag: 50 mm
• torba genişliği: 40 mm
• ambalaj filmi genişliği: 100 mm
• ambalaj kapasitesi: 50 ml
• paketleme hızı: 2000-2200bags/H
• Taşıma Paketi: Wooden Frame
• Teknik Özelikler: 880* 760* 1800mm
• Ticari Marka: Volardda
• Menşei: Guangdong, China
• Üretim Kapasitesi: 100

Ürün Açıklaması

 

Product Description

Introduction

This machine is high precision packing machine and the most advanced liquid compound packing machine in China, which is standing three sides sealing and intermittent. It can automatically complete bag-making, filling, sealing, printing, cutting and counting. Controlled by microprocessor and automatic photocell.
 

Main Performance & Structure Characteristics

1. Film bag automatic molding
2. UV sterilization
3. Automatic longitudinal sealing
4. Automatic marking function
5. Adjustable quantitative filling
6. Automatic transverse heat sealing
7. Automatically cut bags and provide a variety of incision options
8. Low viscosity fluid material circulation system

Technical Parameters

model	SJ-1000
Length of finished bag (mm)	50-150
Bag width (mm)	40-150
Packaging film width (mm)	100-320
Packaging capacity (ml)	50-500
Packaging speed (bags/h)	2000-2200
Power (kw)	1.6
Dimensions (mm)	880*760*1800
Whole machine weight (kg)	275

 

Detailed Photos

Maintenance

1. After use, wash away residual liquid in the pipe with water. Otherwise the residual liquid will be degenerative and affect the quality of product of next production. Remove plastic pipe transfusion and clean it with a brush. Keep it clean and dry.

2. Regularly check moving parts and oiling state and oil the machine with sufficient 20# lubricant or lithium based grease at any time. Otherwise the operation will be out of order and that will severely affect service life of machine.

3. Regularly check the machine and clean away foreign matters on the surface of transverse copper block. It is not allowed to have encrustation on the surface. Otherwise thermal conductivity will be reduced, the temperature of copper will rise, and hot transverse sealing and thermal cutting bag will be out of order.

4. In the case of finding abnormal phenomena, cut off power supply immediately. Restart after troubleshooting.

5. During production in winter with temperature under 0 degree, unfreeze the ice in quantitative pump and the pipes with hot water. Otherwise, connecting rod will be broken or the machine does not work.

6. Single sheet plastic film for the machine should be 80mm thick. The tension strength, even thickness, and lubricating property of film should be guaranteed. The weight of each roll of plastic should be controlled under 18kg (320mm) or 14kg (240mm). Transverse hot sealing temperature should be under 260 degrees. Poor thermal sealing or high failure rate of bag caused by employing single sheet plastic film not recommended by the manufacturer are not within extent of liability borne by the manufacture. Are not within extent of liability borne by the manufacture. 

Application

It is widely used to pack all kinds of liquid without gas, especially soy, wine, vinegar, juice, soybean milk, peanut oil, vegetable oil, plant oil, mineral water and liquid chemical products.
 

Packaging & Shipping

1.All equipment are packed with wooden frame or wrapping film.
2.All parts are fastened in container, guarantee that no damage while shipping.
 

Company Profile

    Guangdong Volardda Water Purification Equipment Co., Ltd is located in Guangzhou Nansha Free Trade Zone, and our factory area more than 5,000 square meters. Volardda is a new intelligent direct drinking water equipment technology manufacturing enterprise integrating R&D, design, manufacturing, installation, operation and service.
    The main products of our Volardda are: Reverse Osmosis Systems,EDI Systems,Water sterilization products, pure water tank,Drinking Water Filling Machine, Household ro system,Pretreatment Systems, Ultrafiltration Systems, Water Softeners, Water treatment accessories etc. We have provided overall water treatment for more than 1,200 customers solution.
    What's more, our products have been exported to Southeast Asia, the Middle East, Africa, America, Australia and many other countries for many years. With profession team, unique design, high-quality products, and perfect after-sales, we can firmly established the Volardda water purification brand !
 

Certifications

Our services

FAQ

FAQ

Q: Are you a factory or trading company?
A: We are factory producing water treatment equipment and have been set up for 8 years.

Q: Where is your factory?
A: Our factory is located in Dagang Town, Nansha District, Guangzhou, which is close to Nansha port and Pazhou. Warmly welcome to visit our showroom and factory.

Q: What range of product do you manufacture?
A: RO system, EDI system, UF system, Sewage water treatment and related accessories.

Q: Is OEM acceptable?
A: Yes, OEM is acceptable. We could produce as per your specific requirement.

Q: How to place order?
A: Send us requirement and inquiry--Get quotation--Confirm the order and PI--Arrange the deposit--Start the production and keep communication--video or photo inspection before loading--Arrange the balance before delivery--Arrange delivery.

Q: What information is needed before quotation?
A1. The quality of the water resource. Any water test report is appreciated.
A2: What is the required output capacity per hour?
A3: What is the application using the equipment?