Protech Vacuum Tray Dryer for Electronics Component Preservation

• After-sales Service: 24 Hours 7days a Week Online Support
• Warranty: 12 Months
• Hareket şekli: Birleşik
• AKIŞ: Paralel Akış
• Isıtma Modu: Şanzıman
• Malzeme Durumu: Toz, Çözüm, Krema, Kayış, Yığın
• Hayır. Modeli.: FZG
• Kurutma Ortamı: Çok ısınan buhar
• İşletim Yöntemi: Aralıklı
• Tip: Shelf Dryer
• vakum pompası: yağ sirkülasyonu/tırnaklı tip
• gmp: evet
• malzeme: su304/316
• vakum odası: düşük basınçlı işlemler için kapalı alan.
• termoplonjörler: kontrollü kurutmayı kolaylaştıran ısı kaynakları
• kontrol sistemi: sıcaklığı, basıncı ve diğer parametreleri yönetir
• sıcaklık kontrolü: hassas sıcaklık düzenlemesi sağlar
• güvenlik özellikleri: acil durum mekanizmaları
• gözlem penceresi: sürecin görsel olarak izlenmesine olanak tanır
• sızdırmazlık mekanizması: oda içindeki hava geçirmez koşulları sağlar
• raflar veya tepsiler: kurutma sırasında malzemeleri düzenlemek için platformlar
• dijital ekran: ayarlar ve kon. hakkında gerçek zamanlı bilgi sağlar
• Taşıma Paketi: Sea Worthy Exporting Packing
• Teknik Özelikler: customized as per working situation
• Ticari Marka: UNITFINE
• Menşei: China
• HS Kodu: 8514300090
• Üretim Kapasitesi: 100 Sets Per Year

Ürün Açıklaması

A vacuum drying oven comprises a vacuum chamber, heating elements, and a control system. Operating on the principle of moisture removal in a low-pressure environment, it protects materials from heat-related issues. Commonly employed in pharmaceutical and electronic industries, the oven ensures precise drying without compromising material integrity. Witness its efficiency in a factory scene, where controlled vacuum conditions facilitate optimal drying processes. Keywords: vacuum drying, pharmaceutical industry.


Vacuum Tray Dryer is suitable for the rapid drying of thermal sensitive materials easily resolved, polymerized of deteriorated under higher temperature. Sterilization can be conducted prior to the drying process, during which no matter is allowed to enter the product. Static vacuum dryer eliminates the configuration damage of the drying materials therefore widely used in pharmaceutical, chemicals and foodstuff etc.
Principally, drying under vacuum is environmentally friendly because the Evaporated Solvents can easily be re-condensed. These solvents can then either be recycled or disposed of without any problem.

Drying of solvents in Ex-proof ovens may solve the safety problem in the oven but not the environmental aspect. The solvent vapor is blown out of the oven through the exhaust system Furthermore, there is a risk of uncontrolled mixture formation.

Special Features:

• Main body and door are made in SS 316 with rigid flange
• Shelves (hollow type) in SS 316 with baffles
• Trays (without back folding) in SS 316
• Condenser (shell & tube) and Receiver in SS 304 for solvent recovery
• Digital Temperature Indicator (FLP) at H.W. Inlet and Outlet
• Digital Temperature Indicator (FLP) at vacuum line
• Dial type vacuum gauge in the vacuum line
• Dial type Temperature gauge in body
• Glass view provided on door and receiver
• Flow glass provided to monitor condensation between condenser and receiver
• Validation port
• Provision for Nitrogen purging
• Vacuum brake valve provided in the vacuum line
• Construction and finish as per cGMP standards

Tray Dryer Working Principle:

• In-tray dryer, hot air is continuously circulated. Forced convection heating takes place to remove moister from the solids placed in trays.
• Simultaneously the moist air is removed partially.
• Wet solid is loaded into the trays. Trays are placed in the chamber.
• Fresh air is introduced through the inlet, which passes through the heaters and gets heated up.
• The hot air is circulated by means of fans at 2 to 5 meters per second.
• Turbulent flow lowers the partial vapor pressure in the atmosphere and also reduces the thickness of the air boundary layer.
• The water is picked up by the air. As the water evaporates from the surface, the water diffuses from the interior of the solids by the capillary action.
• These events occur in a single pass of air. The time of contact is short and the amount of water picked up in a single pass is small.
• Therefore, the discharged air to the tune of 80 to 90 % is circulated back through the fans. Only 10 to 20% of fresh air is introduced.
• Moist air is discharged through the outlet. Thus, constant temperature and uniform airflow over the materials can be maintained for achieving uniform drying.
• In the case of the wet granules as in tablets and capsules drying is continued until the desired moister content is obtained.
• At the end of the drying trays or trucks are pulled out of the chamber and taken to a tray dumping station.

 

Additional:

• Condenser and receiver are made in SS 316
• 300 mm wide SS 304 skirting all along the flange
• 50 mm thick glass wool insulation on the vacuum chamber outer surface except the door. The insulation is enclosed and covered with removable SS 304 angle frame
• Digital temperature controller with a pneumatic operated valve at hot water/steam inlet
• 2 stage water ring type vacuum pumps (partial SS) run by FLP motor
• Hot water system with circulation pump

 

Testing Parameters:

• The vacuum dryer shelves are hydro-tested 5 kg/cm2 assembled condition. The vacuum chamber is tested for leaks under vacuum.

Capacity:

• Standard models range from 3 trays to 96 trays

Applications:

• Chemicals
• Dyestuff
• Pharmaceutical
• Food Products
• Colours
• Nutraceutical

Models available>>>

Model	YZG-600	YZG-1000	YZG-1400A	FZG-8	FZG-15	FZG-30	FZG-38
Inner Size of Drying Oven (mm)	600 × 976	1000 × 1527	1400 × 2054	730 ×1200 ×1450	1500 ×1400 × 1220	2200 ×1500 × 1500	2200 ×1500 × 1600
Overall Size Of Drying Oven (mm)	1135 × 810 ×1020	1693 × 1190 ×1500	2386 × 1675× 1920	930 ×1380 ×1540	1513 ×1924 × 2060	2400 ×1680 × 2050	2400 ×1680 × 2250
Layers of Drying Rack	4	6	8	8	8	8	10
layer Distance (mm)	81	102	102	122	122	122	122
Size of Tray (mm)	310 × 600 ×45	250 × 410 × 45	400 × 600 ×45	460 × 640× 45	460 × 640 ×45	460 × 640 ×45	460 × 640 ×45
Drying Tray Number	4	12	32	16	32	64	80
Pressure of Drying Rack Tube (Mpa)	≤ 0.784
Temperature of Drying Rack (ºC)	-35 to 150
No-load Vacuum degree within the tank (Mpa)	-0.09 to -0.096
Weight of drying oven (kg)	250	800	1400	1680	2100	2850	3200