Endüstriyel Su için 8 inç 8040 RO Ters Osmoz zarı Yüksek Redüksiyonlu Su Dağıtıcısı olarak Tedavi Filtresi Sistemi

• Membrane Type: Spiral
• Type: RO
• tuz reddi: %99.82
• akı: 6600 gsyi̇h
• boyut: 8 inç
• kullanım ömrü: 2-3 yıl
• Hayır. Modeli.: SW8040-440XHR
• maksimum çalışma basıncı: 12000 psi
• maksimum çalışma sıcaklığı: 45 ºc
• maksimum besleme sdi (sdi15): 5.0
• Taşıma Paketi: Standard Export Package
• Teknik Özelikler: 110cm× 26cm× 22cm
• Ticari Marka: UltraClean or Customized
• Menşei: China
• HS Kodu: 8421999090
• Üretim Kapasitesi: 150000PCS/Year

Ürün Açıklaması

UltraClean SW series special reverse osmosis membrane element for seawater desalination is a high-end reverse osmosis membrane element. The bottom membrane of the support layer has high compression resistance and thick skin.It is dense and has no defects on the membrane surface; it is resistant to abrasion and chemical degradation; and no post-treatment is required in the manufacturing process of membrane elements. Its wide pH resistance and high cleaning efficiency, can use ordinary acid and alkali for strong and efficient cleaning, because the cleaning is more thorough, the long-term operating pressure of the membrane system is lower, and the service life is higher. It can greatly reduce operating costs and bring long-term optimal economics to seawater desalination systems.


Product  Highlights

1.High salt rejection
2.Compression resistance, contamination resistance and high cleaning efficiency
3.Improve the overall economics of the desalination system


Membrane Specification


 

A inch(mm)	B inch(mm)	C inch(mm)
40 (1016)	1.125 (29)	7.9 (201)

Performance Specification
 

Effective Membrane Area ft²(m²)	Stablized Rejection Rate(%)	Minimum Rejection rate(%)	Flux gpd(m³/d)
440 (41)	99.82	99.7	6600 (25)

Test conditions: inlet pressure 5.5 MPa (800 psi); inlet temperature 25°C (77°F); inlet water quality 2000ppm NaCl; inlet pH 8; recovery 15%.



Operating and Cleaning Limits
 

Maximum operating temperature                                                                                                                                                                                         113 ºF (45ºC)

Maximum operating pressure                                                                                                                                    1200 psi (83 bar)

Maximum pressure drop                                                                                                                                                                                                        15 psi (1.0 bar)

pH range

Continuous operation                                                                                                                                                                              2 - 11

Short cleaning (30 minutes)                                                                                                                                                                                                                     1 - 13

Maximum Influent Sludge Density Index SDI                                                                                                                                             5

Free chlorine tolerance                                                                                                                                                                   < 0.1 ppm

Permeate flow for individual elements may vary ±15 percent from the value specifed.
Active membrane area guaranteed ±4%.
Stabilized salt rejection is generally achieved within 24-48 hours of continuous use; depending upon feedwater characteristics and operating conditions.

Company Profile

About Us

Production Line

Our Advantages

Why Choose UltraClean

After Sales Service

Delivery Package

FAQ

 

1.Are you a manufactuere or trading company?

We are 100% manufacturer of RO and NF membranes which could help you get products with best quality and price from factory directly.

3.Where is your company factory?

Our Production Headquarter located in New Material Industrial Park, High-tech Zone, Ankang City, Shaanxi Province. Besides, our marketing center is located in Tiancheng Building, Xiangcheng District, Suzhou city, Jiangsu Province. The second factory here is now under construction, will be finished next year, welcome to visit!

2.How is the quality of your products?

We promise three-years quality warranty and will implement it in the form of a contract.

4.Do you support sample order?

Yes, we always support free sample to help our clients check the quality, but we do not bear the shipping cost.

5.Do you support OEM?

Yes, we support OEM service and welcome you to customize our products.

6.How long time usually your products to ship?

15 to 30 days, depend on the distance.