EPS Sandviç Panel üretim Hattı

EPS Sandwich Panel are widely used to build economic house.

Content 3 parts:

1. Steel sheet Roll Foaming Machine

2. Feeding EPS panels, Gelatinizeing and Pressing

3. Cutting Sandwich

Feautures:

1. Colored Steel Sandwich Panel production line mainly consists of the IBR Roll Forming Machine and the Colored Steel Sandwich Panel Laminator. With this machine, colored steel wall panels or colored steel roof panels can be produced in just one-time, and the Corrugated Roll Forming Machine and the Sandwich Panel Laminator can work independently. The whole production line of the Corrugated Roll Forming Machine consists of the un-coiler, cold-bending roll forming machine, cutting device, whereas the Sandwich Panel Laminator consists of the un-coiler for colored steel, EPS block, or mineral wool panel, shallow wave for wall panels pressing device, extruding system, mixed-glue spraying, heating and pressurizing system, sandwich, flat curling, edge rolling, edge-turnover, grooving, edge-trimming device, pneumatic clamping device, automatic plastic film coating device, automatic cutting and product stacker.

2. The transmission of the sandwich panel laminator uses worm-worm gear transmission system, ensuring that lamination speed is stable and lamination is uniform;

3. The sandwich panel laminator uses the frequency regulator to automatically cut according to the pre-set sandwich panel length;

4. The sandwich panel laminator uses rubber-coated roller type laminator to protect the color paint on the colored steel as well as during the pressurizing of the sandwich panel;

5. The sandwich panel laminator has a high quality and thick wall rectangular steel welding method and has the polishing, smoothing and aging treatment to get rid of the rust;

6. The appropriate colored steel sheet: Width=1000-1200mm (the length of panel is without imitation), thickness= 0.2-0.8mm;

7. The recommended core materials for Sandwich Panel: EPS Panels and Mineral Wool Panels;

1. Parameters of the production line:

1)Product thickness: 40-250mm

2)Raw material thickness: 0.27-0.8mm

3)Raw material: (under side) color steel, PVC, aluminized paper

4)Voltage: 380V/50~60Hz, 3phases

5)Production capacity(according to your glue )

4-4.5m/min (the fastest), 2-2.5m/min(the slowest)

6) Total power: About 30KW

7) Weight: 40ton

8)PLC control system, easy to operate, high precision and work stably.

9) Dimensions of whole production line:

About Length45000mm × Width2500mm × Height2600mm