Olight M3xsut - Javelot alüminyum Su geçirmez Ultra Boğaz Taktik Feneri

DESCRIPTION
The M3XS-UT offers up to a full kilometer of beam distance and features a large diameter reflector with a dedomed Cree XP-L High Intensity LED. The light has three brightness levels from 3 to 1200 lumens plus a strobe mode. The M3XS-UT is powered by 3 x CR123A Lithium batteries. When the light is assembled with the extension tube, it can be powered by 4 x CR123A or 2 x 18650 batteries (with protection board). The M3XS-UT retains the tail cap switch design from the M3X for tactical operation, with an added side switch on the head of the flashlight that will allow for easy mode switching. The tail cap of M3XS-UT is a brand-new conductive stretch that keeps the light energized even when the tail cap is loosened accidently.

FEATURES
Cree XP-L High Intensity LED, color temperature:4000K~4500K
Light output ranges from 3 Lumens to 1200 Lumens, Maximum beam distance up to 1000 meters, and a maximum
Run Time of 360 hours.
3 output modes, plus a moonlight and strobe mode. When the light is on burst mode, the brightness level at 1200lm
(5 minutes) ramps down by 60% of the initial light output (55 minutes). 600lm/1.5hrs, 80lm/12hrs, moonlight 3lm/
360hrs, 10Hz strobe mode
The light is powered by 3 x CR123A Lithium batteries. When the light is assembled with the extension tube, it can be
powered by 4 x CR123A or 2 x 18650 batteries (with protection board).
A brand-new conductive stretch tail cap keeps the light energized even when the tail cap is loosened accidently.
The tail switch diameter is 18mm. The tail switch has a momentary ON-OFF functionality, supporting high output and
strobe mode at the same time. The light brightness level and strobe mode can be activated through the side switch.
99% light transmittance rate through tempered glass, with two-sided anti-reflective coating.
Built in thermal management safety program that limits the high output to 5 minutes and then gradually ramps down
high output by 60% after 3 minutes of constant on
Reverse polarity protection to prevent improper battery installation
Side switch featuring a battery power indicator glows red and blinks when the power runs low. When the battery power
indicator is constantly on, the battery will run out of power and will shut the light off
Able to place upside down on a flat surface
IPX8 water-proof capability


LENS
Tough ultra-clear tempering glass with
anti-reflective coating
LIGHT SOURCE
1 x Cree XP-L High Intensity LED
DIMENSIONS
Length: 8.3 in / 211mm
Bezel Diameter: 2.48 in / 63mm (head);
0.98 in / 25mm (body)
Weight: 9.0 oz / 255 g (excluding batteries)
BODY MATERIAL
Aircraft-grade aluminum body with anti-scratch
type III hard anodizing
BATTERY SOURCE
3 or 4 x CR123A
2 x 18650
All performance claims to ANSI/NEMA FL1-2009 Standard. Made in China.
© Olight 5/7/15
WARRANTY
Olight's 5 Year warranty.
Visit olightworld.com/warranty