Kolay Kurulum dekoratif Metal Paslanmaz Çelik Genişletilmiş Metal

• After-sales Service: Yes
• Malzeme: Alüminyum plaka
• Uygulama: Yapı teli Mesh′i, Mesh′i Koruma, Dekoratif File, Filtre, Yayılmış topları iç boşaltma, Barbekü teli Örgü, Kafesler
• Delik şekli: Elmas
• Kullanım: Koruma, Akultür, Su Servanlığı İnşaatı, Sivil Yapı, Demiryolu İnşaatı, Yol İnşaatı
• Dokuma özelliği: Damgalama
• Hayır. Modeli.: SS0330-2
• Yüzey İşlemesi: Powder Coated
• Damgalama Genişletilmiş Metal Mesh Kategorisi: Genişletilmiş Metal Mesh
• Galvanize Yüzey İşlemi: None
• Sıcak galvanize Teknik: None
• Teknik Özellikler: Mesh
• Ağırlık: Orta ağırlık
• Taşıma Paketi: Pallet or Wooden Cage
• Teknik Özelikler: 1.22*2.44m/1*2m
• Ticari Marka: yongkun
• Menşei: China
• HS Kodu: 73145000
• Üretim Kapasitesi: 5000sqm/Week

Ürün Açıklaması

Expanded metal mesh is manufactured from solid sheets/coils of stainless steel, aluminum, carbon steel or other alloys that can be expanded.
The sheets/coils are fed into the expanding machine, and the precision die cuts and stretches the metal in a single operation. Then the material is sheared and stretched into a particular pattern with uniform opening sizes.
The metal sheet can be expanded up to ten times its original width, and the final product is lighter per meter and stronger per kilogram than its original sheet. No material is lost in the manufacturing process. The expanded metal mesh won't unravel because of its strong material properties. Even if the finished metal sheet is cut at one or more points, the remaining strand intersections can hold the sheet together.

Five steps for the manufacturing process

1. The metal sheet advances between the blades one strand width beyond the lower.

 

1. The upper blade descends to form one half of the diamond design.

 

1. The upper blade ascends to its original starting and transverses shift one half of diamond to the side as the metal sheet advances another strand width passing the edge of the lower blade.

 

1. The upper blade descends again to form another row of half diamonds to complete a full diamond pattern.

 

1. The upper blade ascends again to its original starting position, and the cycle continues until the sheet of expanded metal is complete.

Raised expanded metal
Also named standard expanded metal. It is a finished product as it comes from the press. The raised configuration adds rigidity and anti-slip resistance to the mesh.
Flattened expanded metal
Flattened expanded metal is manufactured by passing the standard expanded metal through a cold roll reducing mill, providing a flattened surface and reducing thickness.
Short way of design (SWD)
The length of short diamond diagonal from one pitch point center to another pitch point center.

Long way of design (LWD)
The length of long diamond diagonal from one pitch point center to another pitch point center.
Short way of opening (SWO)
The length of short diamond diagonal.

Long way of opening (LWO)
The length of long diamond diagonal.

Strands
The sides of expanded metal design.

Bond
The solid intersection of two strands.

Strand thickness
Thickness of the metal that to be expanded.

Strand width
Metal plate length for making one strand.

LW
Long way of expanded metal sheet.

SW
Short way of expanded metal sheet.


Material - Stainless steel 304
 

Style	Overall thickness (inch)	Strand width (inch)	Sizes of design (inch)		Sizes of openings (inch)		Open area (%)
			LWD	SWD	LWO	SWO
1/2" #20	0.164	0.080	1.200	0.500	0.937	0.437	70
1/2" #18	0.164	0.087	1.200	0.500	0.938	0.438	77
1/2" #16	0.164	0.087	1.200	0.500	0.938	0.438	70
1/2" #13	0.225	0.119	1.200	0.500	0.875	0.313	58
3/4" #18	0.200	0.106	2.000	0.923	1.750	0.813	89
3/4" #16	0.200	0.106	2.000	0.923	1.750	0.813	85
3/4" #13	0.200	0.107	2.000	0.923	1.688	0.750	78
3/4" #9	0.300	0.161	2.000	0.923	1.563	0.688	67
1 1/2" #16	0.220	0.115	3.000	1.333	2.750	1.250	89
1 1/2" #13	0.220	0.116	3.000	1.333	2.625	1.250	86
1 1/2" #9	0.280	0.155	3.000	1.333	2.500	1.125	75