Epsilon ABD′den Yüksek Sınıf Uzatıcısı

General purpose extensometers for axial tensile, compression, and
cyclic testing. Gauge lengths from 10 to 80 mm (and 0.5 to
2 inches) and full scale measuring ranges from 5% to 100% strain.
These extensometers are designed for testing a wide range
of materials, including metals, plastics, composites and
ceramics. All will work in both tension and compression. The
dual flexure design makes them very rugged and insensitive
to vibrations, which permits higher frequency operation.
They come standard with Epsilon's quick attach kit,
making it possible to mount the extensometer on the test
specimen quickly and easily with one hand. The quick attach kit can be removed,
allowing mounting of the extensometer with springs or rubber bands.
The Model 3542 extensometers are strain gaged devices, making them
compatible with any electronics designed for strain gaged transducers. Most often
they are connected to a test machine controller. The signal conditioning electronics
for the extensometer is typically included with the test machine controller or
may often be added. In this case the extensometer is shipped with the proper
connector and wiring to plug directly into the electronics. For systems lacking
the required electronics, Epsilon can provide a variety of solutions, allowing the
extensometer output to be connected to data acquisition boards, chart recorders
or other equipment.
For gauge lengths 100 mm (4 inches) or greater see Model 3542L.
See the electronics section of this catalog for available signal conditioners and
strain meters.

l Tensile test at room temperature DIN EN10002-1, ISO6892, APJ 5L, JIS Z2241, BS18, ASTM A370, ASTM E8
l Tensile test at high temperature DIN EN 10002-5, ASTM E21
l Tensile test at low temperature ISO/CD 384 E, ISO 15579, ASTM E345
l Tensile test on reinforced steel DIN 488, BS 4449, BS 4482, BS 4483, JIS 3112, ISO 10606, EN 10080
l Testing of steel for reinforcing concrete SI 739, UNE 36065
l Tensile test of steel braid & structural steel EN 10138, BS 5896, ASTM A416
l Tensile test on metal foils ASTM E345, DIN 50154
l Determination of hardening coefficient (n-value) ISO 10275
l Determination of vertical anisotropy (r-value) ISO 10113
l Tensile test on welds DIN EN 895
l Tensile test on chains DIN 22252
l Tensile test on screws ISO 898
l Shearing test DIN 50141, LN 65150
l Testing of pipes EN 10232, EN 10237, ISO 8491
l Compression test DIN 50106, ASTM E9
l Compression test on hard metals DIN ISO 4506, EN 24506
l Bending test ISO 7438, JIS Z 2248, JIS Z 2204
l Sheet metal bending test, 0.05 to1 mm thick DIN 50151
Rubber/Elastomer:
l Tensile: ISO37, ISO 527, ASTM D638 , ASTM D 412,ASTM D1414, DIN 53504;
l Compression: ISO825, ISO844, ASTM D695, ASTM D1621;
l Flexural test: ISO178, ASTM 790
l Tear test: ASTM D624
Adhesive:
l Peel: ISO 36, 4578, 6133, 8510-1/2, 11339, EN 1464, 28510-1/2, 60454-2, ASTM D1876, 3330, 3167, BS 3925, FINAT 1, 2
l Tack: FINAT 3, 9
l Tensile: ISO 6922, EN 26922
l Shear: ISO 4587, 10123, 11003-2, 13445, EN 1465, ASTM D3163, D3164.
Plastic film and sheet:
l Tensile:- ENISO 527-3, ASTM D882
l Puncture:- ISO 3303-A, ASTM D3787, D5748.
Fabric:
l Tensile: ENISO 9073-3 ASTM 5035, EN 802, 826
l Tear: D2262, D5587, ENISO 9073-4, ASTM 2261, BS 3424pt5, 4303
l Puncture/Burst: ASTM DD751, 3787, 3786, 4830, BS 3424pt6
l Footwear: DIN 53 328, 533 329, 53 331.  BS 3144, 5131, 344. ISO 11644. ASTM D-2207, D-2208, D-2209, D-2210, D-2211, D-2212, D-4703, D-4704
Paper:
l Tensile: ENISO 1924-2, ASTM D828, BS 4415, 2782, DIN 53112, JIS P8115, TAPPI T494
l Compression: ISO 9895, BS 7325, DIN 54518, TAPPI T826
l Tear: ASTM D 1938
l Peel: ISO 4578, ASTM D903, D3330, D1000, BS 3887, F88
l Puncture: ISO 3303-A, ASTM D3787, D5748
l Friction: ASTM D 1894