Çimento Kağıt Çantası için iki Renkli Baskı İşlevi çekici Makine yapımı

ZT9802 Tuber Machine Process
1. Two-color printing machine
High automatization.
Two colors are optional for our printing machine, to ensure all of your print requirements are met in highest quality.
Print roller will automatically disengage when the machine stops, preventing the paper sticking to the print roller.
Longitudinal & Latitudinal lines are carved on the printing roller, very convenient for pasting printing plate.
The printing machine is controlled by PLC and equipped with high quality pneumatic device system.
2. Paper reel racks
The machine is equipped with 5 shafted paper reel racks, to ensure 1-5 paper plies available during production.
Each reel stand is equipped with pneumatic shaft to tightly hold the paper reel.
Also each unit has its own breaking system to keep a stable tension force on the rolling paper reel.
3. Paper Web Guide
This unit will reduce the amount of waste from misaligned web and assist your operators reduce your waste levels.
Give the paper a proper and stable tensile force ensuring no breakage during the following steps.
4. Deviation Rectifying System
This unit is to guide each paper layer and rectify the deviation during operation.
Air-liquid servo guiding system in this section can restrict the paper running in pre-set range to prevent it from deviation.
The paper is controlled by hydraulic guiding rollers and air sensors to ensure the paper is presented into the next section in the correct position.
5. Auxiliary driving
This adjustable drive aligning make this part operate and change paper direction toward S shape in order to make the paper go smoothly. In the process of the tubes forming, if the printed brand's position is not correct, the handle in the right of the transmission drive would adjust the degree of aligning until the appropriate place.
6. Perforation
This function is to puncture breaking trace on the ends of paper tube for the following tearing-off section.
This is achieved by using 4 sets of synchronized perforating knifes that perforate each line of paper at the correct position to achieve the correct bag length.
Each perforating knife is based on its own roller which is driven by its individual gearbox further ensuring greater accuracy to achieve the best results.
Each knife is equipped with a photoelectric detecting unit to stop the machine if any of the paper line is broken during the production.
9. Tubes forming
After glued, paper layers travel to tube forming platform.
Under the applications of tuber forming rollers and folding bars, the paper layers are stuck together and tubes are formed finally.
With the rollers and roller supports, the tube is formed with no air bubble in it.
Main drive motor, tearing off and tubes delivery
It is the main driver for the whole process in tube making.
The tube line is separated here into single tubes by the application of speed difference between rollers.
The separation point is right at the perforated breaking line. When the bag length is changed, it can be adjusted accordingly in gear box.
Photoelectric detector is equipped for operation trouble.
10. Counting, delivery and tubes piling up
The finished tubes now are delivered into counting section to preset the quantity of tubes.
Photoelectric control and pneumatic driving device are equipped here to ensure accurate counting and timely delivering.
The tubes will be pushed out in bundle of 20~40 ones.
This unit has also been ergonomically built to ensure that there is no repetitive strain injury to operators.
11. PLC
Our PLC unit is manufactured by Siemens, which is easy to operate and very reliable in operation. The whole machine concludes two parts: Strong electric and feeble electric. PLC unit can work automatically without stopping according to the technological order of the whole machine.