Yüksek kaliteli, Endüstriyel kullanımlı Soğutucu kurutucular

• After-sales Service: Overseas Support
• Warranty: One Year
• AKIŞ: Çapraz Akış
• Malzeme Durumu: Toz
• Kurutma Ortamı: Hava
• Yapı: Ilişikteki
• Hayır. Modeli.: WL225
• Çalışma Basıncı: Atmosfer Basıncı
• Giriş sıcaklığı: 38~65ºC
• Soğutma yolu: Hava Soğutma
• Tip: Orta
• güç: 3,78 kw
• akış hızı: 22,5 m³/dak
• giriş/çıkış: dn65 f
• çalışma basıncı: 13 bar g
• soğutucu tipi: r410a
• güç kaynağı: 380 v - 415 v/3p/50 hz
• basınç düşmesi: 0,21 mpa
• yok: 331 kg
• Taşıma Paketi: Wooden Cardboard
• Teknik Özelikler: 1310× 910× 1655mm
• Ticari Marka: YUKA
• Menşei: China
• HS Kodu: 8419399090
• Üretim Kapasitesi: 10 Pieces/Day

Ürün Açıklaması

WL Series Refrigerated Air Dryer
Flow rate: 1m³/min ~100m³/min
Working Pressure: 7bar g ~16 bar g (100psi g~229psi g)
                               ( Higher pressure can be options)
Ambient Temperature: 1ºC~38ºC (35.6°F~100°F)
Intake Temperature: ≤45ºC (113°F)
Pressure Dew Point: 2ºC ~10ºC (35.6°F~50°F)
Voltage/Phase/Frequency: 208V~240V/1P/50Hz
                                           380V~415V/3P/50Hz
15% ~30% 
Energy Saving than traditional type refrigerated air dryer
30%
Smaller footprint, No space limitation


PRODUCT SPECIFICATION

Model	Power	Flow rate (m³/min)	Inlet/Outlet	Working Pressure	Refrigerant Type	Power Supply	Pressure Drop	Measurment (L×W×H mm)	N.W. (kg)
WL010	0.41kw	1.2	G ¾"	16 bar g	R134a	208V-240V/1P/50Hz~60Hz	0.23 Mpa	500×360×550	42
WL020	0.59kw	2.4	G ¾"	16 bar g	R407c	208V-240V/1P/50Hz~60Hz	0.21Mpa	560×460×732	48
WL030	0.92kw	3.6	G 1"	16 bar g	R410a	208V-240V/1P/50Hz	0.21Mpa	560×460×732	62
WL060	1.45kw	6.8	G 1 ½"	16 bar g	R410a	208V-240V/1P/50Hz	0.20 Mpa	650×500×860	75
WL080	1.9kw	8.5	G 1 ½"	16 bar g	R410a	208V-240V/1P/50Hz	0.20 Mpa	700x570x1040	89
WL100	2.4kw	11.0	G 2"	13 bar g	R410a	208V-240V/1P/50Hz	0.15 Mpa	750×550×1170	95
WL135	2.52kw	13.5	G 2"	13 bar g	R410a	380V-415V/3P/50Hz	0.18Mpa	830x550x1230	115
WL150	2.9kw	15.0	G 2"	13 bar g	R410a	380V-415V/3P/50Hz	0.19Mpa	846x550x1170	128
WL185	3.1kw	18.5	G 2"	13 bar g	R410a	380V-415V/3P/50Hz	0.18Mpa	960x820x1500	168
WL225	3.78kw	22.5	DN65 F	13 bar g	R410a	380V-415V/3P/50Hz	0.21Mpa	1310×910×1655	331
WL265	4.52kw	26.5	DN80 F	13 bar g	R407c	380V-415V/3P/50Hz	0.20 Mpa	1310×910×1655	358
WL325	5.0kw	32.5	DN80 F	13 bar g	R410a	380V-415V/3P/50Hz	0.17 Mpa	1520x1130x1825	455
WL425	6.24kw	42.5	DN100 F	13 bar g	R410a	380V-415V/3P/50Hz	0.17 Mpa	1520x1130x1825	464
WL535	8.95kw	53.5	DN100 F	13 bar g	R407c	380V-415V/3P/50Hz	0.20 Mpa	1900*1360*1825	641
WL650	11.58kw	65.0	DN100 F	13 bar g	R410a	380V-415V/3P/50Hz	0.17 Mpa	1480*1030*1945	610
WL835	13.6kw	83.5	DN125 F	13 bar g	R410a	380V-415V/3P/50Hz	0.20 Mpa	1950*1500*1900	920
WL850	13.0kw	85.0	DN125 F	13 bar g	R410a	380V-415V/3P/50Hz	0.20 Mpa	2050*1240*2010	780
WL1000	14.8kw	100.0	DN150 F	13 bar g	R410a	380V-415V/3P/50Hz	0.16 Mpa	2050*1240*2010	840

FEATURE & ADVANTAGE & BENEFIT

--Energy
The stainless steel 3 in 1 heat exchanger design minimizes the process loss of cooling capacity and improves the recycling of cooling capacity. Under the same processing capacity, the total input power of this model is reduced by 15%-30%, saving energy , to reduce the cost of use.

--Safety
It is equipped with double protection for low-pressure refrigerant and high-pressure refrigerant as standard, which protects the system and prolongs the service life of the equipment.

--StableIt is equipped with a constant pressure expansion valve and intelligent temperature control as standard. In laboratory tests, it still operates stably when the intake air temperature reaches 65°C and the ambient temperature reaches 42°C.

--Efficient
The integrated heat exchanger is equipped with deflector fins to make the compressed air exchange heat evenly inside. The built-in air-water separation device is equipped with a stainless steel filter to separate water more thoroughly.

--Environmental Friendly
In response to the International Montreal Protocol, this series of models all use R134a, R407c and R410a environmentally friendly refrigerants to meet the needs of the international market.


WORKING PRINCIPLE DIAGRAM


FACTORY


CERTIFICATE


FAQ

Q: Are you a trading company or a factory? 
A: We are a professional manufacturer of compressed air separation, filtration and purification equipment since 1998.

Q: Do your company accept ODM & OEM?
A: Yes, of course. Full ODM & OEM accepted and we have professional R&D team.

Q: What payment methods do you accept?
A: T/T.

Q: What are your payment terms?
A: 30~50% T/T in advance, balance before shipping.

Q: How long will you arrange shipping after order confirmed?
A: Generally speaking, 10-30 days after receiving your payment. If some small available parts, we can send in 3-5 days. Pls be aware that production leading time is due up to specific items with different quantity.

Q: How about your warranty?
A: One year warranty provided after you receive our products.