Fiber Ortam Dönüştürücü

Features:
High performance bridge for 10(100)Base-T Ethernet extension
Fully compatible with IEEE 802.3 and Ethernet Standards
E1 channel: Both framed & unframed are OK, both 75 & 120ohm are OK
Ethernet Port: 10Mbps, Full/Half Duplex Mode compatible
Ethernet ports support MDI/MDI-X selectionable
Allow transmitting and receiving VLAN data packet
15000 frames per second filtering and forwarding rate
1000 MAC address LAN table, and automatic LAN table learning and aging
Standalone and Module optional
Power of Chassis: 2 Slots for slide in power supplier module, AC or DC power supplier module, Redundant Power supported
AC220V+/-20% or DC-48V power input

Specifications:
LAN port
Standard: Conforms to IEEE802.3 / 10(100)Base-T Ethernet
Data rate: 10Mbps(20Mbps/10Base-T in Full duplex topology)
Compatible on Full/Half duplex topology
Connectors: RJ-45 Connector
Transfer distance: <150m
E1 port
Standard: ITU G. 703, G. 704,
Jitter Performance: According to ITU G. 823
Bit rate: N x 64Kbps, N=1~31 (Fractional Mode) or 2.048Mbps(Full Mode)
Line Code: HDB3
Line Impedance: 75/120ohms optional
Pulse Amplitude: Nominal 2.37V+/-10%

General:
Voltage: AC 220V+/-20% or DC -48V
Power Consumption: <3 Watts
Temperature: 0-50 degree
Humidity: 0-90%(non-condensing)
Size: (Width: From left to right)
Standalone: 272mm(Width) x 139mm(Deep) x 41mm(High)
Chassis: 438mm(Width) x 252mm(Deep) x 178mm(High)

For the detail specification, please refer to our website.