Warranty Woven Sunhong Wooden Case Sh-FF109 China Forming Belt Sun Hong

• After-sales Service: Warranty
• Warranty: 1 Year
• Sertifika: ISO 9001:2000, ISO 9001:2008, CE
• Üretim Süreci: Woven
• Malzeme: Polyester
• ad: kumaş oluşturma
• Hayır. Modeli.: SUN HONG
• besleme tipi: sipariş üzerine hazırla
• tel çapı eğrilme (mm): 0.17 - 0.22
• tel çapı, yabani ot (mm): 0.20 - 0.45
• yoğunluk (kök/cm) çarpışması: 28-35
• yoğunluk (kök/cm) yosun: 15.2-32
• kalınlık: 0.41 - 0.87
• Taşıma Paketi: Wooden Case
• Teknik Özelikler: SH-FF109
• Ticari Marka: SunHong
• Menşei: China
• HS Kodu: 59119000
• Üretim Kapasitesi: 20000 Pieces/Year

Ürün Açıklaması

Classification of Forming Fabric

Type	Feature	Application
Single Layer		Kraft paper, corrugated paper,etc; Machine speed ≤300m/min
1.5 Layer		Kraft paper, corrugated paper,etc; Machine speed ≤500m/min
2/2.5 Layer		Various grades of paper Machine speed ≤800m/min
Triple Layer		Various grades of paper Various machine speed

 

Installation of Forming Fabric

1. Before installing the forming wire, kindly check the equipment if it is in good condition, the surface of wires should be forbidden from unevenness, slanting, burr, sand, etc.

2. The running direction must be in accordance with the direction of the arrow on the wire, the wire should be placed in the correct position, and the rollers should be paralleled with each other to prevent the wires from being deflected.

3. There should be a swinging high-pressure water device that used to wash wire. Water pressure is not lower than 6-10 kg/cm² for the medium and low-speed paper machine; speed more than 350m/min, water pressure is not lower than 10-15 kg/cm²; When using multi-layer forming wire, water pressure is not lower than 15-30 kg/cm², meanwhile water should be clean and without sand.

4. When installing the forming wire, firstly let the wire be slightly tensioned, add water to lubricate the operation, adjust the tension to normal after sizing, keep the tension of the low-speed paper machine at 3-4 kg/cm², and high speed one at 4-6 kg/cm².

 

The forming fabric is used on paper machine forming section.The forming fabric acts as a conveyor and a dewatering device. As the fabric moves, water drains through it while the fibers and fillers that form the paper structure form on the top of the fabric as the paper sheet is created. lt is critical that the fabric provides a stable, durable environment to aid this process. 

Wovening Serices and Types	Model of Fabric	Thread Diameter mm		Density (pieces/cm)		Strength (N/cm)		Thickness mm	Air Permeability m3/ m2h	Max. Elongation at 50N/cm
		Warp	Weft	Warp	Weft	Mesh Surface	Inserting Place
Four-Shed Single Layer Forming Screen	27254	0.20	0.25	30	22	>600	>400	0.49	8000	0.60%
	27274	0.20	0.27	30	21.5	>600	>400	0.51	7800	0.60%
	31204	0.18	0.20	35	28	>600	>380	0.43	7500	0.68%
Five-Shed Single Layer Forming Screen	28205	0.20	0.20	30	27.5	>600	>400	0.46	6800	0.60%
	30205	0.17	0.20	32	28.5	>500	>350	0.41	7100	0.60%
	30175	0.17	0.17	32	29.5	>500	>350	0.39	6600	0.60%
	31215	0.20	0.21	35	32	>600	>400	0.48	7000	0.60%
Eight-Shed Single Layer Forming Screen	27358	0.22	0.35	29	20	>700	>500	0.85	8500	0.65%
	27388	0.22	0.38	31.5	19	>700	>500	0.87	8000	0.65%
Seven-Shed Single Layer Forming Screen	50207	0.20	0.20/0.22 0.22(t66)	54.7	36.6	>800	>600	0.71	5800	0.60%
	64177	0.15	0.17/0.17 0.17(t66)	70	50	>800	>600	0.59	5200	0.60%
Eight-Shed Double Layer Forming Screen	56188	0.17	0.18/0.20 0.20(t66)	61.3	51.2	>850	>600	0.65	5700	0.60%
	60188	0.18	0.19/0.20 0.20(t66)	66	49	2900	2650	0.68	4750	0.60%
16-Shed Double Layer Forming Screen	603516	0.17	0.13 0.20/0.35	68	49	2960	2700	1.00	406cfm	0.45%
	385016	0.27	0.2 0.25/0.5	43	33	>1500	>1000	1.45	469cfm	0.45%