Temel bilgiler.
Hayır. Modeli.
WTH-series
Maks. Malzeme çapı
3200 mm
Malzemenin Kütle Kapsamı
10.000 kg
Tip
Environmental Test Equipment
Yükleme yolu
Natural State
Yükleme Yöntemi
Statik Yük
Kontrol
Bilgisayar Kontrolü
Ürün Açıklaması
Walk-in environmental test chamber
The stability walk in climatic test chamber are qualifiable and are designed specifically according to customer need. There various size for your choices it, the largest volume can reached at 47M3, and the largest size about 5,400mm.
The walk-in test chamber is well suited for testing the storage transport and usage of eletronic product, auto componet and raw materials under high temperature and low temprature environments.
Technical Parameters of Walk-in environmental test chamber
| Model | WTH40 | WTH60 | WTH80 | WTH120 | WTH160 | WTH180 | WTH230 | WTH290 | WTH310 | WTH390 | WTH470 |
| Volume (m³) | 3.9/3.4 | 6.3/5.5 | 7.8/6.8 | 11.7/10.2 | 15.6/13.6 | 17.5/15.3 | 23.3/20.4 | 29.2/25.5 | 31.1/27.2 | 38.9/34.0 | 46.7/40.8 |
| Temperature range | -60°C -100°C (-70°C -120°C /-70°C -150°C optional) |
| Humidity range | 20%RH~98%RH/(20~85°C) |
| Temperature fluctuation | ±0.5°C |
| Temperature deviation | ±2°C |
| Humidity deviation | ±3.0%RH(>=75%);±5.0%RH(<=75%) |
| Warm-up time | 25°C~+100°C(120°C,150°C optional) |
| <=25MIN | <=28MIN | <=28MIN | <=30MIN | <=31MIN | <=32MIN | <=34MIN | <=36MIN | <=38MIN | <=41MIN | <=45MIN |
| Cooling time | + 25ºC ratedlimit low temperature 30min-180min (it is different according to different models and configurations ) |
| Inner size(mm) | W | 1800 | 2700 | 3600 |
| H | I type:2100 II type:2400 |
| D | 900 | 1450 | 1800 | 1800 | 1800 | 2700 | 3600 | 4500 | 3600 | 4500 | 5400 |
| Temperature & humidity regulating method | BT(H) C balance temperature regulation (humidity regulation) manner |
| Working environment temperature | +5°C~+35°C |
| Protection building envelope | Spraying plastics galvanizing color steel plate, temperature resistant stress thermalinsulation material, SUS304stainless steel composite assembly plate |
| Regulator | Heater | Nicochrome fin heating tube |
| Humidifier | Stainless steel armored heater humidifying the water pond (humidifying the water pond) |
| Fan | Centrifugal fan |
| Refrigerator | Mechanical compressor |
| Refrigerant | R404a or R404a /R23 |
| Refrigerating mode | Minimum test temperature ≥-25ºC: water cooling mechanical compression single refrigeration mode: minimum test temperature <=40°C, water cooling mechanical compression binary cascade refrigeration mode |
| Controller | Display | 7.0inch TFT color LCD display |
| Operation mode | Program operation fixed value operation |
| Setting mode | Multi language menu, input by touch screen |
| Program capacity | Number of editable program: 99 maximum; step : 999 steps; cycle number : 99 maximum |
| Setting range | Temperature: adjust according to the temperature range of the equipment; humidity:0% RH - 100% RH (such as humidity function of equipment) |
| Display resolution | Temperature: 0.01°C, time: 0.1min; humidity: 0.1% RH
(temperature and humidity test equipment) |
| Input | Thermal resistance and thermocouple |
Communication function
( purchasing) | RS-485 interface with local and remote communication function, monitoring software RS-485/RS-232 convertor, one COM interface and one USB interface occupying PC computer; connect 16 sets of equipment at most; and the maximum accumulated length of the cable is 800M. |
| Control mode | Anti-integration saturation PID |
| Curve recording function | RAM with battery protection it can save the setting value sampling value and sampling time of equipment; and the maximum recording time is 350 days (when the sampling period is 1.5 min) |
| USB function | It is equipped with one U -disk and software disk special for PC computer (applicable for complex Chinese, English WINDOWS operation system); the test program is compiled by PC special software and saved in U -disk; and then the test program is tuned out from the U -disk and saved in the controller; or the program in the controller is saved in U-disk and then it is saved in PC machine to be analyzed and managed. The test curve data saved in the controller can be saved in U- disk. The test data/ curve is directly printed and displayed by PC special software; or the recorded data is converted to Access data file read by Microsoft Office. The test curve data recorded by the recorder is as follows: two- circuit temperature- setting temperature and actual temperature; two- circuit humidity- setting humidity and actual humidity ( if the equipment has humidity function );record the time . |
| Auxiliary function | Fault alarm and reason, treatment prompt function, power failure protection function, and upper and lower temperature limit protection function; calendar timing function (automatic starting or automatic stopping); self-diagnostic function |
| Water supply | Humidity system | Equipped with multi-level filter reverse osmosis water purifier (users provide tap water) or users provide humidification water with resistance rate ≥500Ωm |
| Cooling circulating water | Water supply pressure: 0.32~0.45MPa; water temperature: ≤30ºC |
| Power | AC 380V(±10%)V 50HZ three-phase four-wire + protection ground wire / AC220V / AC110V 50HZ /60HZ |
| Installed capacity(KW) | 20KW~55KW (it is different according to different models and configurations) |
| Standard configuration | Observation window, wire hole, floodlight, time accumulator, one power wire (6m long), one sample power control terminal, one RS-485/232 interface, one USB and one U-disk; |
| Safety device | Refrigerating system: over-voltage of compressor, over-heating of compressor, over-current of compressor motor, water supply and under-voltage of cooling water (water cooling); humidifying system (SQW model): dry burning of heating tube, abnormal water supply and abnormal water drainage. Test chamber: over-temperature protection, temperature fuse wire, over-heating of fan and motor, others: phase sequence of total power and lacking protection, leakage protection and load short circuit protection |
Notes:
1. Height: I type:2100mm, II type 2400mm
2. Above parameters are measured when the ambinet temperature is +25ºC and circulating water temperature is +25ºC.
3. The fluctuation parameter is tested in accordance with GB/T5170.2-2008 stardard.
4. The above-mentioned products are designed with a humidifier.
Reference Standards
*GB/T2423.1-2008 Test A: Low Temperature Test Method
*GB/T2423.2-2008 Test B: High Temperature Test Method
*GB/T2423.22-2002 Test N: Low Temperature Test Method
*GJB150.3-1986 High Temperature Test
*GJB150.4-1986 Low Temperature Test
*GJB150.5-1986 Temperature Shock Test
What we can support:
About Simplewell:
Adres:
No. 6 Golden Lake Industrial Park, Songmushan Village, Dalang Town, Dongguan, Guangdong, China
İşletme Türü:
Üretici/Fabrika, Ticari Şirket
İşletme Aralığı:
Araçlar ve Sayaçlar, Elektrik ve Elektronik, Endüstriyel Ekipmanlar ve Bileşenleri, Kimyasallar, Mobilya, Otomobil, Motosiklet Parçaları ve Aksesuarları, Tekstil
Yönetim Sistemi Sertifikasyonu:
ISO 9001
Şirket Tanıtımı:
Simplewell Technology Co., Ltd; simülasyon ortamı ve güvenilirlik test odası, formaldehit ve VOC uçucu gaz test ekipmanı, tüm araç ve bileşenler için güvenilirlik test ekipmanı dahil olmak üzere yaklaşık 10 yıllık deneyime sahip, farklı türde test ekipmanı ve cihazları üreten profesyonel bir yapımcıdır. AR-Ge kapasitesi ve bağımsız tasarım gücü konusunda becerileriz, normal olmayan ekipmanların kurulumunda deneyimlerimiz var, her zaman yeni ürünler sunmaya devam ediyor, pazar taleplerini karşılamak ve sektörde mükemmel bir itibar sağlamak için aydınlatıcı kontrol sistemi geliştiriyoruz.
Fabrikamızda uluslararası lider lazer kesme makineleri, Japon AMD sayısal kontrol, bükme makineleri ve lazer ışını kaynak makineleri gibi modern gelişmiş ekipmanlar bulunmaktadır. Ürün geliştirme, üretim, kalite kontrolü, müşteri hizmetleri ve teknik desteğin her adımında bilimsel yönetim modunu ve felsefesini benimsiyoruz.
Şirket, TUV:ISO9001:2015 sertifikasını ve VDA6.4:2017 kalite yönetim sistemi standartlarını geçti ve Çin, ABD, Japonya, Avrupa vb. ülkelerde birçok icat patenti kazandı. Ekipmanlarımız çeşitli test standartları sunarak test edilen numune ve ürünlerin farklı üretim gerekliliklerine uygun olmasını sağlıyor. Geniş bir uygulama çoğunlukla kurumlarda, Ar-Ge kuruluşlarında, havacılık, askeri projelerde, elektronik birimlerde, elektrik, oyuncaklar, mobilya, donanım, kağıt yapımı, piller, fotoelektrik, iletişim, otomobil, tarım vb.
