KOİ Boru üretim Makine Hattı

COD pipe production machine line features:
Because the material nonconductive, insulation and high, is the ideal cable ducts. In addition the thermal expansion and contraction appearance rather less than traditional ductal system, and due within the same appearance, raw materials, and always maintain the same ratio.
Because of COD tube (every 500 meters) disk volume in the pipe rack, so can reduce quite a lot of the cost of labor, the most important is, COD need not insert tube, because diversiform tube outer tube has been equipped inside.
Because the lighter gravity (0.95: 143), COD rather than light, and traditional tube for construction and transportation, very convenient.
The screw machining, COD to supple, forcibly bending can achieve 90 degrees, and even larger Angle, do not need any special tools to bend or straight. In the construction site meet obstacles can all round the town.
Because of the spiraling tube good design and low friction coefficient, no connection, without twisting the problem of wire special convenient, also extend the distance between the hole. Tube completely hermetic, can fight high internal pressure, can use fiber gas rafa. In the same outer diameter circumstance can give more tube, increase the efficiency in the use of.
The Main Parameters of the machine:
Model Extruder type Pipe range(mm) Output(kg/h) Total Power(kw)
SJQG-Z90× 30-200 SJ90× 30 Φ100-φ 125 φ 150φ 175φ 200 200 130
SJQG-65× 30-100 SJ65× 30 Φ40-φ 50 Φ65φ 80φ 100 90 65