Madencilik Taşları İyi fiyatlı kırıcı üretim hattına uygun olabilir

• Tip: Çekiç kırıcı
• Motor Tipi: AC Motoru
• Motor Gücü: 75 kw
• Uygulama: Yapı
• Malzemeler: Kireçtaşı
• Çıkış Boyutu: 0 mm
• Hayır. Modeli.: PC400X300, PC600X400, PC800X600, PC800X800
• Giriş Boyutu: 400 × 600 mm
• Koşulunu: Yeni
• Warranty: One Year
• After-sales Service: All The Time
• malzeme: kireç taşı, tuğla, altın madeni
• çıktı boyutu: 0 mm
• güç: dizel motor
• Taşıma Paketi: Wooden Case
• Teknik Özelikler: 5-200TPH
• Ticari Marka: Shanky
• Menşei: China
• HS Kodu: 84742090
• Üretim Kapasitesi: 200sets

Ürün Açıklaması

Product Brief Introduction

The hammer crusher (hammer mill) crushes by the collisions between high-speed hammer and material, and the hammer crusher (hammer mill) has the features of simple structure, high reduction ratio, high efficiency, etc. The PC hammer crusher (hammer mill) is developed for both dry and wet crushing of brittle, medium-hard materials for the mining, cement, coal, metallurgic material, construction material, road building, and petroleum & chemical industries.

Features

• The working hammer uses new technology of wear-resisting and impacting resistance.

• The output size can be adopted by the need of customers.

• Sealing structure ,hygienic and environmentally friendly.The crushing unit has closed structure, solved the problems of dust pollution and frame leak in crushing plant.

• Compact structure and convenient maintenance.The whole design has features of handsome appearance, tight structure, less quick wearing part, easy maintenance, it's a kind of upgrade and update product.

  

1. Upper Frame
2. Grizzly
3. Hammer Plate
4. Outlet
5. Hammer
6. Side Lining Plate
7.Lower Frame
8. Base Seat
9. Motor
10. Transmission Shaft
11.Hammer Pin
12. Feeding Protecting Plate
13. Lining Plate

   Working Principle
  Motor drives the rotor quickly in the crushing cavity. Raw materials enter the crusher through the feeding inlet and are impacted, cut and ground by high-speed hammer heads. There is a grate under the rotor assembly, so that materials with size smaller than the grate mesh will be screened out and others are left to be further hammered until they reach the standard size. The size of the final product can be adjusted by changing the grate, the gap between the rotor assembly and the grate can also be adjusted according to different requirements.

Working Site