Doğrulanmış işletme lisanslarına sahip tedarikçiler
Denetlenen Tedarikçi 
The remote controlled demolition robot (hereinafter referred to as the robot ) is a kind of high-efficiency intelligent production equipment for professional crushing. It is mainly used for crushing and risk-removal operations in the construction of inclined and flat lanes in mines and railway tunnel construction and national defense caves.
The robot is propelled by crawlers and uses a breaking hammer to break large rocks into small rocks which is convenient for loading the rocks into dump trucks or mine carts. At the same time, the swing arm can be used to crush the rocks on the left and right sides to achieve a full-section working interface without dead ends which greatly improves the efficiency of rock crushing and reduces the labor intensity of the staff. The robot is specially designed and manufactured according to the working environment of the talc mine site. It has the characteristics of compact structure, flexible maneuverability etc.and can work in narrow and wet roadways. The robot adopts a remote control + manual integrated working mode, which can realize the remote operation of front-line workers away from the mining surface, keep the workers away from the working surface, and greatly reduce the hazard to the workers. The front-line workers can also get on the robot to operate manually making free switch between remote control and manual available.
Environmental conditions for product use
a) The Proctor hardness f of the rock is less than or equal to 12, the block size is less than or equal to 400mm and the loose density is not more than 1.8t/m 3 ;
b) Altitude ≤1000m. Special design is required for plateau environment above 1000m above sea level;
c) The tunnel environment is -5ºC~+40ºC and the maximum relative humidity is ≤90% (when the temperature is 25ºC);
d) The voltage limit deviation is ±5%, and the AC frequency limit deviation is ±1%;
e) The slope of the roadway is ≤ 12 °.
|
Serial number |
Item |
Parameter |
|
1 |
Whole machine weight |
2200 Kg |
|
2 |
Installed power |
15 Kw |
|
3 |
Working voltage |
380 |
|
4 |
Applicable roadway slope |
≤ 12 ° |
|
5 |
Applicable roadway section |
≥ 1800*1800mm |
|
6 |
Minimum turning radius |
≥ 3000mm |
|
7 |
Working height |
1800mm |
|
8 |
Working width |
1800mm |
|
9 |
Hammer weight |
150Kg |
|
10 |
Strike frequency |
600-1100 bpm |
|
11 |
Working pressure |
90-120 bar |
|
12 |
Drive flow |
25-50 L |
|
13 |
Hose diameter |
1/2 inch |
|
14 |
Drill rod diameter |
53 mm |
Doğrulanmış işletme lisanslarına sahip tedarikçiler
Denetlenen Tedarikçi 
