Temel bilgiler.
Tip
Yansıtıcı paneller Tip Fotoelektrik Sensör
Model
Optical Communication
Application
Phototelegraphy
Gold Thinckness Test
Customer Requirements for Production
Standard Export Packing
Standard Ecport Packing
Sealing Materials
Kovar,Tungsten-Copper Alloy
Character
Hermeticall Sealed
Ürün Açıklaması
Product Description
Name | Performance Standard |
gas tightness | Using helium mass spectrometer leak detector, leakage rate is less than 1x10-9Pa.m /s(He) |
insulation resistance | DC500V humidity less than 50%, insulation resistance greater than 10000MΩ |
Dielectric withstand voltage | The duration is 60S, the rate of applied voltage is 500V/s, no breakdown discharge and damage. |
Bending stress of pin | Easy-to-bend lead: rectangular cross-section ≤ 0.15 * 0.51 and circular cross-section ≤ 0.51 in diameter, bending into a circular arc at 3.05± 0.76mm from the sealing position, bending angle at least 45, bending three times, after the stress is removed, there is no breakage, loosening or relative between the lead and the device body when magnifying 10-20 times. Without mobile phenomenon. |
Semi-flexible lead: rectangular cross-section (≥ 0.15 * 0.51) and circular cross-section (≥ 0.51) with a diameter (≥0.51) are bent into a circular arc at 3.05±0.76mm from the sealing position of the lead. The bending angle is at least 30 degrees and bends three times. After stress is removed, there is no breakage, loosening or phase between the lead and the device body when the stress is magnified 10-20 times. Without the phenomenon of mobility. |
Pin fatigue | When the cross-sectional area of the lead (≥ 0.15mm * 0.51mm) or the diameter of the lead (≥ 0.51mm), the lead hangs on the weight of 2.22N (+ 0.14N) and the shell rotates 90°±5° three times, each time rotates 2S-5S and amplifies 10-20 times, there is no breakage, loosening or relative movement between the lead and the device body. |
When the lead cross-section area is ≤ 0.15mm * 0.51mm or the diameter is 0.51mm, the pin is hung with 0.83N±0.09N weight and the shell is rotated at 90°±5° [3 times] and rotated at 2S-5S each time. There is no breakage, loosening or relative movement between the lead and the device body when the lead is magnified 10-20 times. |
Pin pulling force | Pull 2.22N tension under the lead and keep 30S. After removing the stress, magnify 10 times. There is no breakage, loosening or relative movement between the lead and the device body |
Weldability test | The tin bath is kept at 245ºC±5ºC, the soaking time is 245C°±5C°, the diameter of lead wire is not less than 1mm, and the soaking time is 7S±0.5S. At least 95% of the tin surface is covered at the extraction end; pinholes, voids, pores, unleached tin or tin removal are not more than 5% of the total area. |
Gold layer quality test | The product was plated with gold and placed in a 450 ±10 ºC oven in air for 120~130s. No bubbles, peeling and peeling were observed on the surface of the product with 10 times magnifying glass, and no discoloration occurred at the bonding zone, the surface of the sealing ring or the external pin. |
Nickel layer quality test | After nickel plating, the product is put into 450±10°C oven under nitrogen condition. The product is cooled to 100°C after residence time of 15 ~ 16 minutes. No bubbles, peeling and peeling were observed on the surface of the product with 10 times magnifying glass, and no discoloration occurred at the bonding zone, the surface of the sealing ring or the external pin. |
Salt spray test | Salt solution concentration should be 0.5% - 3.0% deionized water or distilled water solution, measured at 35ºC±3ºC, pH 6.5 - 7.2, 24 hours; corrosion defect area exceeded 5% of the area of coating or base metal of any package part (such as cover plate, casing or cap) other than lead. It is regarded as invalid. |
Gold thickness test | It can be customized according to customer requirements. |
Storage conditions |
Products should be stored in a dry, ventilated, non-corrosive gas warehouse with a temperature of -10°C ±40°C and a relative humidity of not more than 80%. |
Certifications
Our Advantages
Export country
FAQ
Adres:
No. 388, Dalian Road, Economic and Technological Development Zone, Rizhao City, Shandong Province
İşletme Türü:
Üretici/Fabrika
İşletme Aralığı:
Elektrik ve Elektronik, Tüketici Elektroniği
Yönetim Sistemi Sertifikasyonu:
ISO 9001, ISO 14001, ISO 20000
Şirket Tanıtımı:
Rizhao Xuri Electronics Co., Ltd. 2001 yılında kurulmuş ve 388 numaralı Dalian Road, Rizhao′da yer almaktadır. Şirket, cam ve metal mührün tasarımı, geliştirilmesi, üretimi, satışı ve servisi ile uğraşan eyalet yüksek teknolojili bir kuruluştur. Kovar alaşımı ferronickel alaşımı, paslanmaz çelik, düşük karbonlu çelik, oksijensiz bakır ve diğer metal malzemeler cam sızdırmazlığı içeren ürünler.
Şirketin 450 çalışanı, 30 AR-GE, 34 kalite yönetimi, 36 teknik garanti, 321 üretimi, ve 29 yönetim personeli.
Malezya, Filipinler, Hindistan, Singapur, Rusya, Almanya, Mısır, Yeni Zelanda, Slovakya ve 10′den fazla ülke ve bölge.
Kurumsal Misyon: Çalışan odaklı, tüm personelle birlikte büyüyor, müşterilere üstün hizmetler sunuyor.
Kurumsal Vizyon: Dünyada elektronik olarak çalışan fıtıklarda birinci sınıf üretici olun.
Temel değer: Meslek, dürüstlük ve her şeyi kazanmış, ödül
çalışması prensibi ile şükreder: Dürüstlük ve gayret, mükemmellik için çalışırım