Screw,barrel design and manufacturing Screw and barrel material:38CrMoAlA,nitriding treated Exclusive screw for PE material make sure good plasticizing effect adopt original famous electric components with high steady running quality . Gearbox: high torque, low noise, hard gear tooth face dedicated extruder gear box Self protective system: Over current protective of motor Over pressure protective of screw
General description	Main electric elements

	Output	Around 200kg/h
	Connect type of extruder and mould	Bolt connection
	Advantages	Main parts adopt top-rank brand Strict real time quality control
Screw	Diameter(mm)	65mm
	L/D	33/1
	Material	38CrMoAlA, Nitrogen treated
	Heating	Casting aluminum heater with stainless steel outer cover
	Heating segments	5 zone
	Heating power	30kw
Barrel	Barrel type	With feeding groove; Water cooling inlet orifice
	Cooling	Cooling by blower, temperature control accuracy: ±1ºC
	Cooling segment	5 segments
	Material	38CrMoAlA, Nitrogen treated
Drive and Transmission system	Main motor power(KW)	45kw motor brand
	Speed adjusting mode of main motor	Variable frequency conversion
	Rotating speed of main motor (r/min)	1500r/min
	Gear box	Hard gear tooth face Low noise design Material of gear: 20CrMnTi

Item	Description	Unit	Remark
New type calibrator make sure good cooling effect and high speed extrusion
1	Diameter range(OD)	mm	20-110mm
2	Wall thickness	/	as per customer's request
3	Mould material	/	40Cr
4	Material of the calibration Bushing	/	Stannum Bronze copper

NO	Description	Unit	Remark
automatic water level control electric cabinet with water-proof protection forceful concentrated spraying water cooling with good cooling effect vacuum pump and water pump adopts intelligent pump with self protection function Perfect pipeline design can keep nozzle unblocked
Function: calibrate the outer diameters and cooling pipe primarily
1	Length of the tank	mm	6000
2	Material of water tank		stainless steel, SUS304
3	Sizing bushing material		Stannum-bronze
4	Cooling Mode		Spray-pouring cooling
5	Pouring areas		4
6	Water Pump Power	KW	1.5kw×2sets
7	Vacuum Pump Power	KW	4kw×1set
8	Vacuum Degree	Mpa	-0.03-0.05
9	Motion Range of Forward and backward	mm	±600, motor drive
10	Up-down Adjusting Range	mm	±50, by manual

NO	Description	Unit	Remark
Pneumatic clamping, variable frequency speed adjusting adopt famous brand cylinder
Function: haul off PE pipe stably and synchronal with extruder speed
1	Available pedrail length	mm	1400
2	Clamping Mode		Pneumatically
3	Speed Adjusting Mode		Frequency Conversion
4	Hauling Motor Power	KW	1.5kw*2set
5	Hauling Speed	m/min	0.5~8

NO	Description	Unit	Remark
PLC control,automatic dust free cutting, with meter counting function Saw blade adopts carbide blade
Function: cut HDPE pipe in fixed length
1	Cutter type		Automatic meter counting cutter
2	Suitable cutting pipe diameter		20-110mm
3	Cutting speed		Synchronization, automatic cut in fixed length
4	Motor power	KW	2.2
5	Material of Cutting Saw		Alloy steel
6	Clamping Mode		Pneumatically Drive
7	Cutting Control		PLC control
8	Maximum cutting thickness	mm	18
9	Suitable cutting speed	m/min	12

PPR Boru Makine Fiyatı

Tedarikçi ile İletişime Geçin