EPDM kauçuk Sac yırtılmaya karşı direnç, Ozon ve Hava koşullarına dayanıklılık sunar

• Material: EPDM
• Usage: Industrial Rubber Slab, Industrial, Flooring, Printing, Rubber Floor Covering
• Feature: Wear-resistant, Impact-resistant, Heat-resistant, Corrosion-resistant, Insulating, Cold-resistant
• Raw Materials: Synthetic Rubber, Pad
• Taşıma Paketi: According to Customers′ Requirements
• Teknik Özelikler: by roll
• Ticari Marka: Prima industrial
• Menşei: China
• HS Kodu: 40082100
• Üretim Kapasitesi: 50000kgs/Day

Ürün Açıklaması

EPDM rubber sheet  details:
Thickness: from 1mm to 30mm,
Width: from 0.3 to 2.2mtrs
Length: from 1~ 50mtrs.
Standard colour: Brown,white,red,orange, black etc.
Tensile strength:6-12MPa ( Professional Grade)
Density:1.30g/cm3
Hardness:65+/-5 sh.a
Elongation:300-500%

PRIMA RUBBER INDUSTRIAL CO.,LTD

Natural Rubber (NR) has low compression set, high tensile strength, superior resilience, good abrasion and tear resistance, and good vibration dampening characteristics. Not recommended for hydrocarbons, ozone, UV and contact with strong acids.
Products details:
Thickness: from 1mm to 30mm,
Width: from 0.3 to 2.2mtrs
Length: from 1~ 50mtrs.
Standard colour: Brown,white,red,orange, black etc.
Tensile strength:18-22MPa (Natural rubber sheet- Professional Grade)
Density:1.05g/cm3
Hardness:45+/-5 sh.a
Elongation:500-1000%


PRIMA RUBBER INDUSTRIAL CO.,LTD
The characteristics of other various rubber are as follows:
Synthetic Rubber 
Such as SBR,EPDM,CR(Neoprene),NBR(Nitrile),Silicone,FPM rubber sheet etc.
can inserted 1~2 ply fabric and finish double sides.
you can Select products according to the working condition.
Standard Thickness :from1mm to 50mm (only Silicone rubber sheet thicknes 0.1mm to 50mm)
Color:Black,red,grey etc.
The Inserted  rubber sheet with 1 Ply,2PLY 
Thick: 1.8-30mm width: 1-2m Length: 1-50m
and all the rubber sheet can make double size or one side fabric/cloth finish. 
If you want to learn more details abouth these products conctact us.

This FPM (Viton)fluororubber material is resistant to extreme conditions, including all aliphatic, aromatic and halogenated hydrocarbons, acids, animal and vegetable oils. It should not normally (without specialised blending) be used with ketones, low molecular weight esters and nitro containing compounds.
Temp. range from -20 to +300°C
Standard
Colour:Black, 
Tensile strength :from 6MPa to 12MPa,
Hardness: 60-80 sh.a