220 V 1,5kw Er11 Su soğutmalı İğ Motoru Su Soğutma ve 1,5 kw VFD Değişken Frekanslı Sürücü ve 80 mm Mil kelepçesi ve Su Pompa

Spindle: 220V 1.5KW ER11

Basic parameters:
Size: 80x200mm (Middle body diameter:80mmxLength:200mm)
Speed Ways: Through 3-phase output inverter and adjust the inverter frequency to change the spindle speed.
Cooling: Water cooling 
Power Interface: Optional H20-4 pins waterproof air plug. The air plug marked "1 ","2"," 3"," 4", "1 ","2 ","3" were connected to inverter (U, V, W), 4 connected inverter ground. (Pay attention! our spindle "4" connecting to GND,promised personal safety!!)
Power: 1.5kw (1HP=0.735kw)
Voltage: 220vAC  (If you need 110v/380v spindle ,please leave message to us,thank you)
Frequency: 400Hz
Speed: 0-24000rpm
Runout Off: 0.01mm
4pcs bearings
Bearing Type: 2×7002C P4 DT & 2×7002C P4 DT
Collet: ER11
Clip Knifediameter: 7mm, 6.35mm, 6mm, 5mm, 4mm, 3.175mm, 3mm, 2mm, 1mm (standard 6mm)
Grease Lubrication
Main Application: Engrave for wood,bamboo,normal PCB,PVC,PMMA,plastic,duotone board(ABS)and etc nonmetal, also can engrave on gold,silver,copper, aluminium,Pb etc soft metal surface working,but not milling working.(Please pay more attention, this is wood working spindle, only can used for wood working and aluminum working,please don't use it for steel. If you need steel working,please check the metal spindle,thank you!)
 
 Advantage:
P4 angular contact bearings ,2×7002C P4 DT & 2×7002C P4 DT,increase spindle life.(New type,4 bearings)
Longer length make the torque bigger,more powerful.
Carefull assembly make the spindle more precisional.
Precision 0.01mm.Coaxial degree less than 0.0025mm
Shipment within 4 days,promise the delivery time.

Care and maintenance:
Water cooled spindle MUST be used with water pump. Otherwise the spindle will soon broken.
AC spindle motor MUST use with inverter. The power of inverter need equal or bigger than the spindle power. Before using,please set up the inverter parameters suitable for spindle. Otherwise the spindle and inverter will broken at once.
When you use the spindle,the noise is not same as always,please STOP the spindle at once. You may need to replace the spindle bearings.
 
Inverter: 220V 1.5KW

Tech parameters:
 
Inverter Type: 220v 1.5kw
Input Voltage: 220V(+/-15%) ,We also stock 380V(+/-15%), please contact us
Output Voltage: 220vAC
Input Frequency: 48-63 Hz
Output Frequency: 0-400 Hz
Input Phase: 1 or 3 phase
Output Phase: 3 phase  
Warranty: 1 year from the date you purchased
 
Product Feature:
 
PID control; advanced calculus PID closed-loop arithmetic, quick responding speed and high suitability;
Easy PLC function can realize 16 legs of speed and inverter control function;
RS485 communication port, adopting standard international MODBUS main circuit control;
With extremely strong anti-jamming capability
Low output ratting torque0.5HZ-150%, low speed running ability;
Carrier adjustable by 16KHZ, completely soundless working environment;
Broad voltage working area, normal running in 304V-456V;
Auto voltage regulation (AVR) technique, for ensuring the inverter load capability;
Various control technique by both synchronization and non-synchronization, dynamically realize fast starting without changing brakes;
With perfect error protection and short circuit starting protection capability;

 Advantage: 
Control Mode is SPWM,it is very easy to use and convenient
Protection functions are very strong,
Fin over-heat protection,
Overload protection,
Fuse protection,
Restart after instant stop,stall protection.
Powful function
Low price
 
 
80mm Cast Aluminium Bracket:
Diameter:     80mm
Material:   Cast Aluminium
 
Features: 
Compared with the aluminium profile fixture,the accuracy is much higher , and it is hard to deform.
Inner wall is very smooth,  outer walls is sandblasted, relatively fine uniform,  but not very smooth,.
Cast aluminium fixture is much heavier than aluminium profile fixture
 
 
Product Description:
Cast aluminium fixture is high quality aluminium which is casting with a special manufacturing process ,compared with ordinary aluminium ,This product has toughness, strong shock resistance, high hardness and strong antioxidant activity. 
 
Usage:
Cast aluminium fixture is mainly used for fixation of ancillary products, thereby ensuring the verticality of balancing and ancillary products, ancillary products to improve running accuracy, reduce noise, reduce the accumulated error


Water Pump:

Basic parameters:
Max Head: 3.2 m;
Power: 75w
Maximum Flow: 3200L / H
Plug Cord Length: 1.4m
Voltage :220V
Frequency: 50 HZ
Outlet size: 4 and 6 mm
Dimensions: 145 * 110 * 90 mm
 
Advantage:
High Lift
Large Flow Rate
Highly Durable
Excellent Insulation
Can cool the machine quickly
Good quality and long life
Large inventory
Big strong power
 
Features:
The shell is made of high quality plastic, which is anti corrosive and high durable.
Pumps have excellent insulation thanks to the motor bearing completely sealed.
Pumps combione pumping, filtered,oxygen and fountains in one. 
 
Note:
Must be used in the water.
Must cut off the electricity once the product works improperly and must maintain it after lifting it from the water.