İnşaat için alüminyum Döşeme Kontrol Bağlantısı

• marka: Meishuo
• dolgu malzemesi: EPDM/Neoprene Core
• malzeme: alüminyum alaşım profili
• ürün: Stainless Steel Movement Joint Profile
• boyutlar: özel
• malzemeler: Ss, Aluminium or Brass
• Hayır. Modeli.: MDS
• fabrika: evet
• örnek: 3 gün
• oem: evet
• hareket mafsalı: +-%3
• Taşıma Paketi: Corrugated Carton Box or Plywood
• Teknik Özelikler: ISO9001-2008
• Ticari Marka: MEISHUO
• Menşei: Nanjing, Jiangsu, China
• HS Kodu: 7604299000
• Üretim Kapasitesi: 8975m Movement Joint Profile Per Month

Ürün Açıklaması

Aluminum Tile Control Joint for Construction
Movement control joint strips are designed to control thermal expansion and contraction in constructed surfaces, especially for installation in ornamental and architectural hard paving. For use in stone, tile, terrazzo and virtually any other solid floor finish which requires movement control due to thermal contraction and expansion.
The movement control joint strips are manufactured specifically for use in sand cement bed underlay, where the surface flooring finish will be installed onto the wet cement bed. They can be used both internal and external applications.
Photos of Movement Joints





Features of tile movement joints & control joint
Tile movement control joint profile is designed specifically for avoiding compressive strain inside floor tiles. Movement profiles are used for separating stoneware tiling (clinker slabs, ceramic tiles, natural stone slabs). The movement control joint profiles are ideal for absorbing and cushioning compressive strains because of the soft core. This purposefully avoids cracks in the stoneware tiling.
Material
The movement control joint can be available in Aluminum, Stainless Steel or Brass material.
The insert rubber color can be Black, Grey, White or Beige.
Length: 3m for aluminum, 2.438m for stainless steel and 3m for brass]
The movement control joint strips are manufactured specifically for use in sand cement bed underlay, where the surface flooring finish will be installed onto the wet cement bed. They can be used both internal and external applications.
How to Install Movement Control Joint
Control Joint Installation
1. Use a trowel to cut in the bed through to the slab to make it same width as control joint. Make sure there's no debris in it.
2. Insert the control joint in the bed to the required depth.
3. Level the floor finish and control joint to the required height. Make sure control joint is not installed above the floor finish.
4. Finish installation.

Contact us
Jackie Liu
Mob: [phone]