Temel bilgiler.
Özelleştirilmiş
Özelleştirilmiş
Function
Teaching Purpose for Universities
Taşıma Paketi
Plywood Box
Teknik Özelikler
aluminum structure
Ürün Açıklaması
MR004R Minrry Domestic Air Conditioner Simulator
Training Equipment Education Laboratory Equipment
Simple air conditioning system
Ventilation duct, cross section 250x250mm
Selectable expansion element, using solenoid valves
Expansion valve and capillary tubes 1m
Radial fan with regulating fin
Laminar evaporator with drip tray
Compressor: 1/2 HP
Condenser: Air cooled.
Evaporation chamber, damper.
Size (Length, Width, Height): 1100x720x490mm
Weight: 80kg
Must have fault insertion and simulation and allows drawing the P-I Diagram via 1.26
User manual in Spanish with theory and practices for instructor and student
Size: 1100x720x490mm
Freezer main controller
- Adopted 32-bit high-performance ARM processor
- Built-in USB port for PC connection
- Up to 16 temperature modules can be interlocked
- Built-in RS-485 communication terminal for multipoint communication
- The RS-485 communication circuit must be designed as an insulation structure to improve noise immunity.
- 12-bit AD input for pressure and humidity sensor interlocked 16Ch
- Built-in 16-channel digital input for function control.
- 16 built-in LEDs to verify the output status inside the PCB
- Built-in 16 external LEDs to verify the output status
- Up to 16 relay output channels (8 basic channels, 8 optional channels)
- The relay for the output must have a rating of 10 A or higher.
- The SMPS and DCDC converter must be integrated and designed with an external signal and an insulation structure.
- Power source: AC86 ~ 264V, 50 / 60Hz free voltage
- Within the size of PCB 250X140
It must contain the elements cited below as:
Compressor: 1 / 2HP, single phase 220V, Control box.
Condenser: Air cooled.
Evaporator: Pin, Tube Type.
Accumulator: 1 / 2HP
Receiver Tank: 1 / 2HP
Expansion Valve: Manual, welded.
Electronic valve to operate: 3/8 '' with clamp or welded.
Filter Dryer: 3/8 '' with clamp or welded
Pressure gauge: High Pressure, Low Pressure.
Filling nipple, attached to a nipple to fill
Acrylic visor: with clamp or welded
Duct: PC 250x250
Fan: 220V, speed controller included
Pin heater: 1Kw
Wind Pressure: 220V Pitot Tube
Temperature Sensor: 9 pieces
Liquid Receiver, Accumulator
Refrigerator temperature module
- Built-in 4Digit FND with good visibility
- Up to 16 temperature modules can be interlocked
- Built-in RS-485 communication terminal for multipoint communication
- RTD type temperature sensor input
- Accuracy within ± 0.2 degrees
- Built-in 10A rating relay
- Built-in 4-bit rotary switch for address configuration
- Using a 10 A output relay
- Power source: DC24V
- Front PCB size within 70X50
Product feature
The training bench takes aluminum frame with cabinet structure, it is concise and fastness, it is not only to lighten the equipment, but also ensure the strength of equipment, it is equipped with 4 universal casters on its bottom, which is easy to move.The refrigeration circulation pipeline is laid on installation panel, it is painted with different colors on high and low temperature area, which is easy for observation and distinguish.The equipment is fitted with good safety protection system. It is equipped with high-low pressure protection switch in refrigerating cycle, when system pressure is abnormal; the compressor can stop work immediately to protect compressor and system. It is equipped with earth leakage circuit breaker, emergency stop and reliable ground protection in electrical circuit, which is to ensure safety of equipment and personal.
Technical data
(1) Input power: 220V±10%, 50Hz(2) Overall dimension: 1600mm×800mm×1800mm(3) Weight: 100kg(4) Operating condition: environment temperature 10ºC~30ºC, relative humidity <75% (25)(5) Refrigerant: R134aThe bench allows:Understanding and analyzing the characteristics of the different refrigeration system's components.Analyzing the different functional defects of a refrigeration system and finding the defective organs.Simulating 15 faults minimum in the refrigeration system.Study of the different expansion's modes.Calculating the thermal balances at the condenser and the evaporator as well as the theoretical and real efficiencies.Determination of the freezing cycle diagram.Technical characteristics:Compressor:The refrigerant fluid is conformed to the new standards of the refrigerant fluids.Air condenser:Forced convection.Copper pipes.Evaporators:Forced convection.Refrigerant components:Dehydrator.Electromagnetic valve.Manual valves, low pressure regulator valves.Liquid-steam exchanger. Suction line accumulator.Pressure switches, high and low pressure manometers.Flow meters.Digital thermometers.Enthalpy diagram of the refrigerant fluid (A3 format). The necessary accessories for the efficient functioning.Power supply: 220V/380V/50Hz
Service
We supply supply7*24 hours service, customer design service, OEM service, buyer label service. With professional engineers team and sales team, we assure you good product quality.
Certificate
Our products takes ISO9001 product management system.
No. | Feature Name | Details |
1 | Customer design | Yes |
2 | Warranty | 1 year, 2 years, 3 years or 5 years according to client requirements |
3 | Package | Plastic film+ carton+ Fine plywood |
4 | Products standard | International didactic equipment standard |
5 | Application range | Educational equipment for university, college, vocational training centers |
6 | Company philosophy | Supply best quality Chinese products to the worldwide schools. |
7 | Self owned brand | Shouldshine, SSEDU, JSS. |
8 | Production time | From 10 days to 60 days according to different items |
We also have below equipment, please click the link to see it
electrical training equipmentmechatronics training equipment
Adres:
Building No. 3 Double Innovation and Creation Industry Center, No. 803 Keyuan Road, High Tech Zone, Jinan, Shandong, China
İşletme Türü:
Üretici/Fabrika
İşletme Aralığı:
Ofis Malzemeleri
Yönetim Sistemi Sertifikasyonu:
ISO 9001
Şirket Tanıtımı:
2009 yılında kurulan Jinan Minrry Technology Equipment Co., Ltd., eğitim ekipmanları, mesleki eğitim ekipmanları ve didaktik ekipmanlar üreten bir fabrikasıdır. Minrry, kendi kendini geliştirme ve araştırma mühendisleri ekibiyle birlikte 5000 metrekarelik bir fabrikayla Shandong Eyalet Yüksek Teknoloji ve İnovasyon şirketidir.
Geçmiş ISO9001, IS14001, OHSAS18001 sertifikkaları.
100′den fazla ülkeye yönelik Minrry ürünleri ihracatı.
Ürün yelpazemiz en az şu kadar kötü:
Elektrik eğitim ekipmanı
Mekatronik eğitim ekipmanı
sıvı laboratuar ekipmanı
Termal eğitim ekipmanı
Soğutma eğitimi ekipmanı
PCB laboratuar ekipmanı
Şirketimiz, çok amaçlı taleplerinizi karşılayabilecek çeşitli ürünler sunar. Şirketin kurulmasından bu yana "önce kalite, önce müşteri ve kredi tabanlı" yönetim ilkelerine bağlı kalırız ve müşterilerimizin potansiyel ihtiyaçlarını karşılamak için her zaman elimizden geleni yaparız. Ekonomik küreselleşme trendi karşı konulamaz bir güçle geliştiğinden, kazançlı bir durum elde etmek için şirketimiz dünyanın dört bir yanından gelen kuruluşlarla işbirliği yapmaya samimi bir şekilde istekli.