Monitörlü Deniz/Gemi Elektrikli Yağ Su Ayırıcısı

Marine Electric Oil Water Separator With Monitor

1. This device can be used to treat oily bilge water in order to make it reach the requirements of IMO. MEPC. 107(49) resolution, which is also called 15ppm bilge separator. It contains type approved 15ppm bilge separator. 15ppm bilge alarm and Automatic shut down Device.

2. The device adopts the combination of first stage, cine plate gravity and coalesce separation, second stage. Fiber filter and third stage, membrane permeation in order to make the treated bilge water to reach the requirements of discharge standard of the resolution of IMO. MEPC. 107(49)

3. As shown in teh enclosed drawing, bilge water comes into the first stage coalescer separator because of the feeding pimp. That is in a vacuum negative pressure, and it effectively prevents the problem that the bilge water is difficult to be separated because of the emulsion caused by feed pimp under pressure. The liquid coming out of feed pump is adsorbed and filtered and filtered by the second stage fiber filter, and then goes into the third stage membrane to reach the discharge standard.

4. There is a 15ppm bilge alarm in the ship cabin to measure the oil content of effluent, If it finds that the oil content of effluent is in an excess of limit, the oil content meter can make order to switch turn it into the third stage, membrane treatment process,

5. The oil content meter will give an alarm if finds the oil content of effluent is above limit, and the unqualified water pneumatic three-way valve VS6 is opened automatically, so that the unqualified water is return to bilge, not to the overboard.