Yüksek kaliteli Isıtıcılar, Klima, Elektrikli Arabalar ve diğer Küçük PTC Isıtıcıların temini

Principle and function of PTC heater
PTC type ceramic heater adopts PTC ceramic heating element and corrugated aluminum strip by high temperature adhesive. The type PTC heater has the advantages of small thermal resistance, high heat transfer efficiency, and is a kind of automatic constant temperature and electric heater. And one of its prominent features in safety performance, any application will not have such as electric heating tube type heater surface of the "red" phenomenon, causing burns and fire safety.
The most striking feature is:
Cost of 1.PTC type ceramic heater, long life.
Do not need special thermostat and thermal resistance thermocouple temperature sensor for temperature feedback can control the heating of the heater, the temperature regulation is on its material properties, so that the product is far greater than the service life of the heater.
2.PTC type ceramic heater, green environmental protection.
The design of the heater body is heated at a temperature of 200 degrees Celsius.
Body is not red and has a protective isolation layer, any application is not required for the use of asbestos and other heat insulation materials
Line cooling treatment, can be assured that use does not exist on the human body burns and cause fire problems.
3.PTC type ceramic heater to save energy.
Heating tube and a resistance wire heating products, this product is by the material's own characteristics, according to the change of environmental temperature to regulate their own thermal power output, so it can heater power consumption optimization control in is the smallest, and high heating efficiency of materials also significantly enhance the energy utilization efficiency.
- warming up quickly, in case of the failure of the wind turbine can also control the temperature, long service life
- wide voltage range, can be designed according to the needs of 12V-380V
- easy to design, can be from a small power to the high power of any design, shape can be designed according to the requirements
- no burning, safe and reliable, PTC fever, no redness, no fire
In small and medium-sized power heating occasions, PTC heater with constant temperature heating, no open flame, heat transfer rate is high, the supply voltage with minimal impact, long service life, etc. traditional heating component and incomparable advantages, in the electric apparatus in application receives more and more R & D engineers favor.
PTC type ceramic heater use attention
(1) the PTC heating plate has the characteristics of automatic constant temperature, no temperature control system, the PTC heating chip directly through the power.
(2) when the PTC heating piece is used to heat the liquid (e.g. water), the liquid is heated and the PTC is not damaged.
(3) if the PTC heating plate is used to heat the cold, not the wind, the PTC heating plate is not damaged.
(5) long service life, under normal circumstances, life expectancy of 10 years or more.
(6) the work is reliable, the use of PTC heating chip internal characteristics of temperature control, never over temperature.
(7) the working voltage is very wide: when the operating voltage changes 2 times, the surface temperature changes very little.
(9) when used with a plurality of PTC heating sheets, it shall be in parallel, not in series.