%100 Görev Döngüsü 0.8 saniye Yüksek Hızlı yol Bariyeri (PAB-B-HSN)

Descriptions

1) This road barrier provides open/close time: 0.8 / 1.5 sec. Optional

2) Straight arm with rubber bar, Max. Length following:
3m for 0.8 sec.
3.5m for 1.5 sec.

3) Inclusive of arm and "push button" which Opens/closes barrier

4) Exclusive of LED light bar, remoter, boom bracket and anti-collision mechanism: Need to buy extrally

5) Optional housing color as yellow (default), orange, white, red and blue

6) Optional boom arm direction as leftward or rightward

Features

0.8 second fast action and 100% duty cycle operation with 5 million MTBF for toll gate

Free-maintenance torque motor ensures 100% duty cycle operation with 5 million MTBF and 0.8 second open/close time for toll gate and parking lots wth high traffic flow.

Automatically check the operation status and report error
System always automatically check operation status and errors will be shown on the LED tube of the controller

Anti-collision protects boom arm (optional)
Once anti-collision mechanism installed, it will protects the boom arm not to be damaged once boom arm was collided by a vehicle.

Safety--- Anti-hit by pressure resistance bounce
While moving down, arm will immediately go back to vertical position once it is obstructed by an imposed force, which protects the vehicle or person not to be hit by boom arm. The sensitivity is adjustable.

Safety--- Anti-hit by Loop Detector (Optional)
While barrier boom moving down, If a coming vehicle was detected to be existing on the ground induction coil, the arm will go back to vertical position immediately until loop input was dismissed and then the arm will go down immediately.

Safety--- Anti-hit by IR photocell (Optional)
While arm moving down, If infrared transportation between transmitter and receiver is blocked by human or vehicle, the arm will go back to vertical position immediately. The arm will automatically close once the infrared transportation recovers.

Safety--- Anti-hit by "Opening Priority"
If a vehicle is coming while arm moving down, the arm will immediately go back to vertical position once a open command is given, which protect the vehicle not to be hit by arm.

Automatically close after the given time
Once this function is set "ON", the barrier will automatically close after given time (1-90 seconds adjustable) if there is no vehicle passed after barrier open.

Automatically Close by loop detector (Optional)
If loop detector is installed, after vehicle passed the barrier will automatically close once the loop input was triggered

Automatically open by loop detector (Optional)
If loop detector is installed, when barrier boom is in horizontal position, the barrier boom will go up immediately once the loop input was triggered

Manually control in case of no power

Specifications
1) Power: AC 220± 10%, 50/60Hz, Max. 0.5A
2) AC Motor: 70W concreted decelerating torque motor
3) Controller: Intel 80C51 MCU, 40 MHz, controlled silicon motor control
4) Spring: Multi-spring balance
5) Loop detector input: Pulse width 100> Ms
Infrared detector input: Pulse width 100> Ms
Up & Down input: Pulse width 100> Ms

6) Traffic light output: Relay output, max. Current 1A
7) Loop detector Syn. Output: Relay NO output, AC220V/0.5A, DV 12V/1A
8) Wireless remoter(optional): Two button remote transmitter, distance> 20m
9) RS 485 interface: 9600BPS, ASCII decimal encoded
10) Arm: 45× 100mm Aluminum alloy
11) Housing material: 2mm cold-roller sheet, IP 54 level
Housing size: 950mm× 320mm× 329mm
Package size: 1030mm× 375mm× 460mm
12) G. W: 55 KG
13) Operating temperature: -25 -55degree;
14) Humidity: 10%-95%