Gaz pedalı Sensörü

Technical Specifications
1. Fullfill the standard of FMVSS124
2. Ambeint Conditions:
2.1 Operating temperature: -40 DEG to 85DEG
2.2 Operating humidity: Equal or below 95%
2.3 Storage temperature: -40 DEG to 85DEG
2.4 Test temperature: 23DEG plus or minus 5 DEG
3. Contacless Sensor is used
4. Electrocircuit:
4.1 Voltage supply: DC5 Vplus or minus 0.3V
4.2 Operating electrical current: 20mA(Max)
4.3 signal output: 15%± 1%~76.8%± 2%
7.5%± 2%~38.4%± 2%
4.4 Signal Test load: 10KΩ C=4.7nF
4.5 Sensor linearity: Under 2%
4.6 Reverse polarity Voltage Protection: Protect
5. Electrocircuit connection
5.1 Matching Connector type; DELPHI 12066317
6. Mechanical Requirement:
6.2 Starting force: 17%p6N, Ending force 33%p6N,
Resilience more than 8N
6.3 Fatigue Test: Can endure 43million of full working
Stroke cycles (100 times/min)
6.4 PEDAL MATERIAL: ST 12, 65Mn. PA66 GF33
APS specify an E-gas pedal, who is simulation traditional gas pedal's working and sending electrical signal to ECU.
APS Compared with the traditional throttle, APS can use wire to replace the cable, in throttle there put in a micro motor, motor contral the throttle valve. Electronic accelerator pedal can realize the driver's intentions accurately.
Used in agricultural equipment, truck, passenger car, off-highway vehicles, construction equipment and marine applications, applied to the following engines:
Yuchai Engine
Weichai Engine
Dalian engine
Hangzhou engine
Yunnei engine
Shanghai engine
Bosch company
If you are interested in our product, please contact me.