Variable High Voltage DC Power Supply with 35kv1kj Charging Rate

• Output Type: Single
• Warranty: 1 Year
• Output Power: 1kw
• Input Voltage: 220V
• Connection Mode: Series Switching Power Supply
• Starting Mode: Self-excited Switching Power Supply
• Hayır. Modeli.: CCP 35KV1KW
• Voltage Regulating Mode: Frequency Modulation Type
• Power Supplying System: Terminal Power Distribution Equipment
• Energy Transmission: One-way Transmission
• Modulation System: PFM
• Brand: Idealtek
• çıkış gerilimi: 35 kv
• çıkış akımı: 60 ma
• çıkış polaritesi: pozitif veya negatif
• devre modu: ac/dc yüksek frekans dönüşümü
• çalışma modu: sabit gerilim/sabit akım
• çıkış ayarı: 10 dönüş potansiyometresi
• çıkış ekranı: led
• koruma: kısa, aman tanrım, yük boşaltma
• uzaktan kumanda: 0 ~ 10v/4 ~ 20ma analog sinyal kontrolü/rs portları
• uygulama: yüksek voltaj kapasitörü şarjı, yüksek voltaj düşüşü
• Taşıma Paketi: Plywood Case
• Teknik Özelikler: IGBT & HF transformer
• Ticari Marka: IdealTek
• Menşei: China
• HS Kodu: 85044019
• Üretim Kapasitesi: 100PCS/Month

Ürün Açıklaması

CCP Series High Voltage Capacitor Charging Power Supply 35KV1KJ

Brief Introduction

The CCP series high voltage switching mode DC power supply specially designed for capacitor charging, compared to traditional linear HV power supply, it has faster response time and higher efficiency, also it has high precise and adjustable output voltage, featured current-limit working mode and unique discharging circuit which better suit capacitor charging requirements.


Features

1. Continuous DC operation or capacitor charging application
2. Output 0-10kV adjustable from 0 to 100%
3. Constant current output
4. Charging in constant current mode and switch to constant current mode till fully charged.
5. Unique double isolated system, strong anti-interference ability.
6. Forced air cooling, very rugged design
7. Local or remote control (optional)


Applications

1. High voltage capacitor charging
2. High voltage charging


Technical Specification
 

Electrical Characteristics
1. Input Voltage	Tri-phase 208Vac
2. Input frequency	50 ~ 60Hz
3. Input current	6A@208Vac
4. Output Voltage	0 ~ 35KV, continuously adjustable
5. Output current	0 ~ 60mA, continuously adjustable
6. Output polarity	positive or negative as customers' requirements
7. Output adjusting mode	10-turn potentiometer or 0~10V analog signal control or RS port.
8. Line regulation	≤0.5%
9. Load regulation	≤0.5%
10. Ripple	≤0.5% (measured @ 1uf load)
11. Total Efficiency	≥85%
12. Temperature Coefficient	<200ppm/ºC
13. Charging repeatability	≤0.1% (measured @ 16uf load)
14. Read output	Digital LED
15. Output display	4^1/2 digital meter
16. Protections function	Input over load protection: built-in 15A/250V fuse, NO replacing with metal wire! Over temperature protection: automatic shutdown output when shell temperature exceeds 70ºC Short-circuit protection: output power and voltage both decrease to "0" when output shorted. Load discharging protection
17. Cooling	Forced air cooling
18. Dimension	19" sub-rack unit with 4U height and 600mm Depth
19. Weight	approx. 12Kg

Note: every power supply has 48 hours full load burn-in test @ 40ºC


Panel instruction
Front panel instruction

Front panel includes: power switch, HV ON/OFF switch, voltage & current adjustors, voltage & current meters
Functions as table below:

Power switch	This switch is used to control AC input electric, when switch set to "ON" position, input electric comes in, when set to "OFF" position, input electric switched OFF. Do switch off this switch in maintenance!
HV ON/OFF switch	HV started when set to "ON" position, HV shutdown when set to "OFF" position.
Voltage adjustor	It is 10-turn potentiometer for output voltage adjusting, when turned to "10" position, output voltage rises its Max. value, when turned to "0" position, output voltage decreases to its Min. value.
Current adjustor	It is 10-turn potentiometer for output current adjusting, when turned to "10" position, output current rises to its Max. value, when turned to "0" position, output current decreases to its Min. value.
Output voltage meter	Display output voltage value
Output current meter	Display output current value

 
Back panel instruction


Back panel includes HV output terminal, cooling fan, GND terminal, AC220V input, serial port-1 and serial port-2
Functions as table below:

HV output terminal	HV output connector, easy and convenient installing
Cooling fan	Ventilation direction: from inside to outside, keep the cooling duct clean for better ventilation.
GND terminal	Make sure of good and tight GND connection for load and earth. Load must be connected to earth via this point.
AC 220V Input	Standard 3-core AC 220V input terminal.
Serial port-1	RS232 communication port for remote contol
Serial port-2	N/A for this unit.

 

Environment conditions

1. Working environment conditions:
    1.1. Temperature:-10ºC ~ 40ºC
    1.2. Relative humidity: <90% (non-condensing)
    1.3. Height: 4000m
2. Storage environment conditions:
    2.1. Temperature: -20ºC ~ 60ºC
    2.2. Relative humidity: 10% ~ 90%
    2.3. Height: 4000m
 

Safety caution

1. This power module has HV output, only professional person could operate it.
2. Please make sure of good grounding before operation.
3. Capacitor charging power supply has low internal stored energy, please NO no-loading working.
4. Keep power module clean and good ventilation.
5. HV input & output connectors or HV load no touch anything.

Physical drawing and other type enclosure (for reference only)


Storage

Pay attention to the following points during temporary & long-term storage.
1. Store the power supply in our packing box
2. Long-term storage would lead to electrolytic capacitor degradation, it should be powered up yearly, at least 5 hours power-on time, input voltage should be increased to rated value by voltage regulator.  


Warranty

1. The warranty period of this product is 12 months, free repair within warranty period except for man‐made damages or irresistible forces.
The following cases during under warranty are not included in free-warranty scope:
(1). Incorrect operation & maintenance of the power source that cause fault.
(2). Natural loss of consumable material (shell, connector etc.)
(3). Manual damage caused by modification or dismantle
(4). Damage caused by external equipments or third-party product or plug-in units.
(5). Force majeure factors, such as fire, flood or input grid abnormal.
(6). Unilateral amendment or modification on our LOGO or part number.
(7). Fault caused by abnormal usage of power source.
(8). Other non-product quality causes
2. Reasonable maintenance & repair costs should be charged after warranty period.

Remark: Price offered in this page is for reference only, price changes would be made without notice
               Please contact us for accurate offering, thanks for understanding.