Tungsten Karbür nozul (W0430-3-1007) Tekstil Makinesi Kablo Kılavuzu İğnesi

• Classification: Special Parts
• Processing Type: Metal Processing
• Match Machine: Weaving Equipment
• Material: Tungsten Carbide
• Processing Level: Super Precision Finishing
• Mechanical Process: Drilling
• Hayır. Modeli.: W0430-3-1007
• Processing Trade: Processing with Material Supplied
• Certification: ISO9001: 2000
• Customized: Customized
• Condition: New
• menşei: dongutları
• marka adı: kim chen
• uygulama: cnc otomatik sarma makinesi
• lehçe: hassas bileme
• bükülme önleyici: 2.300 n/mm
• sertlik: sag90 dereceden fazla erişildi
• yerin kabalığı: ra0,025
• deliğin pürüzlülüğü: değer0,1
• Taşıma Paketi: 20PCS/Box
• Teknik Özelikler: As requested
• Ticari Marka: KIM CHEN
• Menşei: China
• HS Kodu: 8479899960
• Üretim Kapasitesi: 50, 000PCS/Month

Ürün Açıklaması

Coil winding nozzle, tungsten carbide nozzle, wire guide nozzle, wire guide tube China supplier, China manufacturer.

Coil winding wire guide Nozzles(TungstenCarbide nozzle)also call wire guide tubes, wire guide eyelets, wire guide needles, it is used on coil winding machine. It is made precisely of hard alloy and enjoys the hardness up to HRA90. Two terminals andinnerle are all receive mirror surface treatment to ensure enameled wire makes no scrape. High hardness, resistance to flexure, block and impact.

Coil winding wire guide nozzles(Hard alloy nozzle)Tungste carbide nozzle Features:
1. High Wear Resistance
This is assured by the choice of materials for wear elements possessing a minimum hardness in excess of Vickers 1, 000 (HRC 70).
2. Scratch-Proofing
Eliminate wire insulation film damage, low friction resistance, stable wire tension. The wire-guiding surfaces are mirror finished by diamond lapping to a surface roughness of 2 -4 micro inches Ra or better, material permit.

3. Straightness and Stiffness
Straightness and Stiffness are defined by the wire exit being concentric and inflexible with respect to the nozzle locating? . In plain terms, the wire should exit from the nozzle concentric to the locating? To within 0.02 mm, with or without load. A geometric characteristic presentation is shown at upper left. Concentricity to within 0.01mm.
4. Precise Exit Radii
Because the coil winding nozzle's Exit Radii governs the angle of the wire exit from one coil to the next, it should be monitored to + / - 0.025 mm. This is done by digital measurement, shown at upper right.

Series of fixing dimension Ø2
Serial	Model	Specification ( mm )
		L	L1	D	D1	d1	d2	H
1	W0435-2-1010	35	10	2	1.0	0.4	0.4	N/A
2	W0535-2-1210	35	10	2	1.2	0.5	0.5	N/A
3	W0435-2-1207	35	7	2	1.2	0.4	0.4	N/A
4	W0635-2-1210	35	10	2	1.2	0.6	0.6	N/A
5	W0435-2-1007	35	7	2	1.0	0.4	0.4	N/A
6	W0530-2-1210	30	10	2	1.2	0.5	0.5	N/A
7	W0330-2-0808	30	8	2	0.8	0.3	0.3	N/A
8	W0330-2-0607	30	7	2	0.6	0.3	0.3	N/A
9	W0435-2-1508	35	8	2	1.5	0.4	0.4	N/A
10	W0635-2-1510	35	10	2	1.5	0.6	0.6	N/A
11	W0335-2-0810	35	10	2	0.8	0.3	0.3	N/A
12	W0326-2-1007	26	7	2	1.0	0.3	0.3	N/A
13	W0430-2-1010	30	10	2	1.0	0.4	0.4	N/A
14	W0530-2-1010	30	10	2	1.0	0.5	0.5	N/A
15	W0430-2-1085	30	8.5	2	1.0	0.4	0.4	N/A
16	W0735-2.5-1811	35	11	2.5	1.8	0.7	0.7	N/A
17	W0835-2.5-2011	35	11	2.5	2.0	0.8	0.8	N/A
18	W0330-2-1006	30	6	2.0	1.0	0.3	0.3	N/A
19	W0635-2-1215	35	15	2.0	1.2	0.6	0.6	N/A

 

Series of fixing dimension Ø3
Serial	Model	Specification (mm )
		L	L1	D	D1	d1	d2	H
1	W0330-3-1007	30	7	3	1.0	0.3	0.3	N/A
2	W0430-3-1007	30	7	3	1.0	0.4	0.4	N/A
3	W0530-3-1010	30	10	3	1.0	0.5	0.5	N/A
4	W0630-3-1007	30	7	3	1.0	0.6	0.6	N/A
5	W0330-3-0807	30	7	3	0.8	0.3	0.3	N/A
6	W0630-3-1211	30	11	3	1.2	0.6	0.6	N/A
7	W0630-3-1309	30	9	3	1.3	0.6	0.6	N/A
8	W0630-3-1511	30	11	3	1.5	0.6	0.6	N/A
9	W0611-3-1506P	11	6	3	1.5	0.6	0.6	5
10	W0614-3-1509P	14	9	3	1.5	0.6	0.6	5
11	W0814-3-1509P	14	9	3	1.5	0.8	0.8	5
12	W1014-3-1509P	14	9	3	1.5	1.0	1.0	5
13	W0414-3-1009P	14	9	3	1.0	0.4	0.4	5
14	W1030-3	30	N/A	3	N/A	1.0	1.0	N/A
15	W0326-3-0808	26	8	3	0.8	0.3	0.3	N/A
16	W0330-3-0810	30	10	3	0.8	0.3	0.3	N/A
17	W0330-3-0607	30	7	3	0.6	0.3	0.3	N/A
18	W03265-3-0811P	26.5	11	3	0.8	0.3	0.3	15
19	W0626-3-1208	26	8	3	1.2	0.6	0.6	N/A
20	W1030-3-2014	30	14	3	2.0	1.0	1.0	N/A
21	W1230-3-2514	30	14	3	2.5	1.2	1.2	N/A
22	W0330-3-0707	30	7	3	0.7	0.3	0.3	N/A
23	W0330-3-0502	30	2	3	0.5	0.3	0.3	N/A
24	W0626-3-1208	26	8	3	1.2	0.6	0.6	N/A
25	W0530-3-1210	30	10	3	1.2	0.5	0.5	N/A
26	W0330-3-0504	30	4	3	0.5	0.3	0.3	N/A
27	W0825-3	25	N/A	3	N/A	0.8	0.8	N/A
28	W0435-1211	35	11	3	1.2	0.4	0.4	N/A
29	W03535-3-0811	35	11	3	0.8	0.35	0.35	N/A
30	W0735-3-1411	35	11	3	1.4	0.7	0.7	N/A
31	W0430-3-0808	30	8	3	0.8	0.4	0.4	N/A
32	W1025-3-1608	25	8	3	1.6	1.0	1.0	N/A
33	W0845-3-2017	45	17	3	2	0.8	0.8	N/A
34	W1535-3	35	N/A	3	N/A	1.5	1.5	N/A
35	W0535-3-1211	35	11	3	1.2	0.5	0.5	N/A
36	W1036-3-2016	36	16	3	2.0	1.0	1.0	N/A
37	W0630-3-1212	30	12	3	1.2	0.6	0.6	N/A
38	W1022-3-2010	22	10	3	2.0	1.0	1.0	N/A

 

Series of fixing dimension Ø4
Serial	Model	Specification ( mm )
		L	L1	D	D1	d1	d2	H
1	W0830-4-2015	30	15	4	2.0	0.8	0.8	N/A
2	W1243-4-2515	43	15	4	2.5	1.2	1.2	N/A
3	W1243-4-2515P	43	15	4	2.5	1.2	1.2	20
4	W0843-4-2015P	43	15	4	2.0	0.8	0.8	20
5	W1232-4.5	32	N/A	4.5	N/A	1.2	1.2	N/A
6	W1543-4-2512P	43	12	4	2.5	1.5	1.5	20
7	W0843-3.9-2019P	43	19	3.9	2.0	0.8	0.8	19
8	W2020-5	20	N/A	5	N/A	2.0	2.0	N/A