API Hammer Union FIG1502, 602, 100, 2002, etc. Pipe Fitting Connections Butt Welded and Threaded for connecting
High pressure union is forged and made of high strength alloy steel with imported world-class technology.
Strict heat treatment ensures uniform metallographic structure and bearing capacity in the connector. The materials used fully comply with ASTM and AISI of USA, and the technical indicates of the product with API Spec 16C standard. The product is tight and reliable, and provides easy mounting and dismantling and good exchangeability. The connector of the product allows connection for pipeline thread, oil tube thread and butt weld or pressureless seal end.
Hammer Union is mainly used in oil industry in high-pressure pipeline connection. Size 1"~5", work the pressure 7mpa to 140mpa (1000psi - 20000psi), the API 6a and 16c certification, prevent H2S union according to the NACE standard MR0175.
- With self-locking type ACME threads design;
- Rapid tightening and remove;
- Made by international standard, and can be interchangeable with imported parts;
- Seal with high pressure resistance;
- Using cnc machine tool processing seiko degree is high;
- Type, specification identifies marks on the wing nut.
|
FIGURE 100
Recommended for water, oil or gas service up to 1,000 psi NSCWP 1" - 8"
- FNPT or Buttweld
- Fig 100 utilizes machined ball-and-cone metal sealing surfaces
- All hammer union components are forged; the materials are dual-certified for standard service and sour (H2S) service with no reduction in pressure rating. This hammer union is available in both a standard temperature range and a low- temperature (-50 F) range.
- Subs and wingnuts are made from the same heat of a common alloy to simplify material traceability and heat treatment processing.
- Like parts are physically interchangeable with other manufacturers, however it is highly recommended that all components of a hammer union connection be from the same manufacturer whenever possible to ensure safe and predictable use.
- Design calculations performed in accordance with API 6A Section 5
|
|
| Size (in.) |
Length (in.) |
Nut Radius (in.) |
Weight (Kg.) |
| 2" |
35/8" |
229/32" |
2.6 |
| 2-1/2" |
49/32" |
35/8" |
5.2 |
| 3" |
51/8" |
4" |
6.2 |
| 4" |
53/4" |
411/16" |
10.2 |
| 5" |
633/64" |
59/16" |
13.8 |
| 6" |
67/8" |
67/8" |
23.2 |
| 8" |
75/16" |
713/16" |
32.2 |
|
FIG206
Recommended for air, water, oil or gas service to 2,000 PSI NSCWP. A Buna-N 'O' ring is mounted on the plain sub to provide an additional seal. Subs and nuts of the Fig. 206 unions are interchangeable with the Fig. 200 unions. Standard subs are threaded for API line pipe. Sizes of 2" and above also available with butt weld ends. connections.
|
|
| Size (in.) |
Length (in.) |
Nut Radius (in.) |
Weight (Kg.) |
| 1" |
219/32" |
2" |
1 |
| 11/4" |
225/32" |
25/32" |
1.07 |
| 11/2" |
229/32" |
213/32" |
1.07 |
| 2" |
31/4" |
229/32" |
2.4 |
| 21/2" |
41/4" |
35/8" |
5.02 |
| 3" |
417/32" |
41/4" |
6.6 |
| 4" |
415/16" |
5" |
9.1 |
| 6" |
625/32" |
61/2" |
19.3 |
| 8" |
75/16" |
713/16" |
29.1 |
| 10" |
93/32" |
91/16" |
41.36 |
|
FIG602
Recommended for air, water, oil, gas or mud service to 6,000 PSI NSCWP. This unions has a replaceable lip-type seal ring of Buna-N specifically designed to minimize fluid flow turbulence. Lip-type ring provides a pressure seal and protection for metal-tometal seating surfaces. Smaller and lighter than Fig. 600 unions and are recommended for manifold and truck mounting where size and weight are critical.
|
|
| Size (in.) |
Length (in.) |
Nut Radius (in.) |
Weight (Kg.) |
Length |
| Butt. Weld |
| Total |
CTR. BR. |
Sch. 80 |
| 1" |
317/32" |
1/4" |
25/32" |
1.59 |
317/32" |
| 11/4" |
429/32" |
1/4" |
37/32" |
4.54 |
411/16" |
| 11/2" |
429/32" |
1/4" |
37/32" |
4.1 |
411/16" |
| 2" |
51/4" |
1/4" |
33/4" |
5.9 |
51/32" |
| 3" |
61/4" |
3/8" |
41/2" |
10.45 |
57/16" |
| 4" |
81/4" |
3/8" |
57/32" |
15 |
61/16" |
FIG1502
Recommended for air, water, oil, gas and mud service to 15,000 PSI NSCWP. This unions has a replaceable lip-type seal ring of Buna-N specifically designed to minimize fluid flow turbulence. The lip-type ring also provides a pressure seal and protection for metal to metal seating surface and are recommended for manifold and truck mounting or other installations where high pressure is encountered. |
|
| Size (in.) |
Length (in.) |
Nut Radius (in.) |
Weight (Kg.) |
Length |
| Butt. Weld |
| Total |
CTR. BR. |
XX HVY |
| 1" |
43/8" |
1/4" |
23/4" |
3.82 |
- |
| 2" |
7" |
1/4" |
4" |
9.54 |
61/4" |
| 3" |
75/8" |
3/8" |
413/16" |
14.1 |
51/4" |
| 4" |
81/2" |
1/2" |
61/16" |
34 |
- |
| 5" |
97/64" |
- |
645/64" |
44.4 |
- |
FOR MORE INFORMATION ABOUT OUR PRODUCTS, PLEASE CONTACT US.
1) How can I place an order?
A: You can contact us by email about your order details, or place an order online.
2) How can I pay you?
A: After you confirm our PI, we will request you to pay. T/T and Western Union are the most usual ways we are used.
3) What's the order procedure?
A: First we discuss order details and production details by email or TM. Then we issue you a PI for your confirmation. You will be requested to do a prepaid full payment or deposit before we go into production. After we get the deposit, we start to process the order. We usually need 15-25days if we don't have the items in stock. Before production has finished, we will contact you for shipment details, and the balance payment. After payment has been settled, we start to prepare the shipment for you.
4)How do you take care when your clients received defective products?
A: replacement. If there are some defective items, we usually credit them to our customer or replace them in the next shipment.
5)How do you check all the goods in the production line?
A: We have spot inspection and finished product inspection. We check the goods when they go into the next step production procedure.
Denetlenen Tedarikçi 
