High Quality White PTFE Bolt and Nut

• Malzeme: PTFE
• Tip: Customized or as Per Drawing
• Bağlantı: Ortak cıvata
• Baş Stili: Customized or as Per Drawing
• Standart: DIN, ANSI, GB, JIS, BSW, GOST
• Derece: Customized
• Hayır. Modeli.: PTFE Products
• Uygulama: Makineler, Kimya Endüstrisi, Çevresel, Yapmanda
• sıcaklık: -180ºc- +250ºc
• renk: beyaz, destekleyici özelleştirme
• avantaj: yüksek sıcaklık ve korozyon direnci
• ham madde üreticileri: shandong dongiyesi
• Taşıma Paketi: Wooden Box
• Teknik Özelikler: Support customization
• Ticari Marka: JSLW
• Menşei: China
• HS Kodu: 39209910
• Üretim Kapasitesi: 50tons/Month

Ürün Açıklaması

Product Description:
Introduction of PTFE bolts and nuts:Polytetrafluoroethylene is commonly known as "Plastic King". It has excellent chemical stability, corrosion resistance, airtightness, high lubrication and non-stick properties, electrical insulation and good anti-aging endurance. Polytetrafluoroethylene is a synthetic polymer material that uses fluorine to replace all hydrogen atoms in polyethylene. This material is resistant to acids, alkalis, and various organic solvents, and is almost insoluble in all solvents. At the same time, PTFE has the characteristics of high temperature resistance, and its friction coefficient is very low, so it can be used for lubrication, and it has become an ideal coating for easy-to-clean woks and water pipes.
Use Advantages:
1. High temperature resistance-the working temperature can reach 250ºC.
2. Low temperature resistance-good mechanical toughness; even if the temperature drops to -196ºC, it can maintain 5% elongation.
3. Corrosion resistance-for most chemicals and solvents, it is inert, resistant to strong acids and alkalis, water and various organic solvents.
4. Weather resistance-has the best aging life among plastics.
5. High lubrication-the lowest friction coefficient among solid materials.
6. No adhesion-it is the smallest surface tension among solid materials and does not adhere to any substances.
Product Performance:

Item	Denisty	Tensile Strength	Elongation	Dielectric Strength
Unit	2.1-2.3g/cm3	≥15.0Mpa	≥150%	10kv/mm

Note: The above parameters are for reference only. The actual data is based on the product test data.

Product Display:
Product Packaging:
Factory And Equipment:
Certificate Display:
Exhibition Photos:

Our Service: 
1. Providing technical consultation.
2. Samples are free. 
3.We could customize various products with your brand logo according to your requirements. 
4. Your inquiry will be replied within 1 hours during working time,Within 24 hours when rest time. 
5.Orders will be produced exactly as request and approved samples.
6. Before shipment,our QC will have inspection to make sure the quality. 
7.We always try best to ensure every order to delivery in time. 
8.Special packaging according to request.