Doğrulanmış işletme lisanslarına sahip tedarikçiler
Denetlenen Tedarikçi 1. Use
This device is suitable for the formation of the pipe port of the pipe.
2. Features
1). The main use of the CNC system, servo system, and hydraulic system control, using an octagonal rotation disk fluttering to the hydraulic molding, including two stations as rotating chamfers;
2). The device has the function of pause or continuous processing, which can be converted.
3). It has an automatic alarm function. When the device fails during operation, it will fail to call the police.
4). When replacing the product, the mold replacement is convenient, fast, and accurate positioning.
| NO. | Item | Qty | Brand |
| 1 | CNC System | 1 unit | JISUN |
| 2 | Switching Power | 1 pc | MW |
| 3 | Cylinder | 1 batch | AIRTAC |
| 4 | hydraulic oil pump | 1 unit | JUNTAI |
| 5 | Hydraulic motor | 1 unit | JUNTAI |
| 6 | Servo Motor | 2 unit | INOVANCE/HCFA |
| 7 | Air-cooler | 1 pc | RISEN |
1 Processing material straight copper tube (hard state)
2 The processing process is sawn, expanded, expanded, shrinks, and chamfers
3 Processing pipe diameter φ12.7mm
4 Processing wall thickness 0.5-1.2mm
5 Processing length 80-150mm
6 Processing efficiency 180-300pcs/h
7 -station number to 6 -station+rotation 2 station stations
8 number of blocks 1
9 Umbrella stroke 100mm (adjustable 50mm)
10 The biggest nominal power of the top 30kn
11 The largest nominal power of the folder 18KN
12 depth tolerance ≤0.25mm
13 Coaxial tolerance ≤0.1mm
14 Processing method Cold forging+rotation
15 Drive Method Hydraulic/Blood pressure/servo
16 Equal Method
17 Operation method Automatic/manual/click
18 Electric Control Method CNC System+Servo Motor
19 hydraulic pressure ≤11MPa
20 Air pressure 0.4 ~ 0.7MPa
21 oil pump motor three -phase 380V /3.7kW
22 Power method three -phase 380V /50Hz
23 Extraction of the device main body (long x wide X height) MM 1600x800x1500mm (excluding material rack)
- Specify the pressure/oil pressure pressure every day to ensure reliable use.
- Regularly lubricate each motion component and keep the equipment tidy.
- Regularly clean the equipment inside and outside the equipment. Each sliding surface, screw, oil hole and other oil are not polluting, and all parts do not leak oil or air. The cutting and dirt around the equipment should be cleaned to avoid affecting operation and product quality.
- Equipment working hours are calculated every day at 8-10 hours. If the production time is required for a long time, it is necessary to strengthen the operation and maintenance of accessories such as easy loss of parts and motors to ensure the stability of the equipment.
Our equipment is widely used in air conditioning, automobile, furniture, water heater, water treatment, medical, high -speed rail, aerospace and other industries, as well More than 200 types of automated equipment were developed.
The main products include all -in -one machines (feeding/pipe end/punching edges/bending pipes), automatic tube ending machine (expansion/shrinkage/rod/flower arrangement), feeder (dandruff/non -dandy), CNC pountyl (drilling) machine, CNC sealing machine, crushing machine, bending machine, automatic angle machine, tube tube machine, ultrasonic cleaning machine, automatic dehumin machine, automatic stuffy header, automatic scoring machine, automatic rolling roller, automatic roller roll Sink machines, pressure test machines, assembly machines, welding furnaces, retirement furnaces, flame welding, high -frequency welding machines, water inspection machines, automatic assembly slot machines, and above equipment can complete high -efficiency mass production for the factory conditions, and have it to have it to have Humanized operation design, stable equipment, simple maintenance, complete types and specifications, and customer provision of personalized design.
Q: Are you a manufacturer or trading company?
A: We are a manufacturer. We are focusing on metal pipe/tube processing machines production.
Q: How to choose the pipe/tube bending machines?
A: You need to tell us the following tube parameters:
- Tube material
- Tube diameter
- Tube thickness
- Tube length
- Tube bending angle
- Tube drawings if possible
Q: What certificate do you have?
A: We have both ISO and CE certificate.
Q: How about your service?
A: Before Sales Serive:
(a)We will provide you with our professional tech.proposal and machine videos for your reference.
(b)We will try our best to answer all the questions and help you solve all the problems.
(c)Welcome to visit our factory!
Doğrulanmış işletme lisanslarına sahip tedarikçiler
Denetlenen Tedarikçi 
