Isı İletim yağı Fırını, Lateks Nitril eldiven Fabrikası için Termal Yağ Kazanı

thermic Fluid Heater, thermal oil boiler, hot oil boiler
thermal capacity: 350kw-1400KW
Working pressure:0.8-1.0 MPA
Outlet temperature:320 C
Available fuel:natural gas, coke oven gas, bio-gas,liquefied petroleum gas, diesel, heavy oil, light oil, crude oil
Available industries:Petroleum, chemical, chemical fiber, pharmaceutical, textile printing and dyeing, building materials, wood processing, vegetable oil processing and other industries
YYW series oil fired thermal oil boiler designed with three passes coiled tubes, the tail heat surface form the wet back type smoke-transfer chamber structure, to improve heat efficiency. large access door design of boiler's front and rear panel,hammer paint coating, which makes the inspection convenient,elegant outside.
Working Principle Of Thermic Fluid Heater
Oil-fired thermal oil boilers have a three-pass round coil structure. A conical coil is used for the effective protection of the furnace wall at the boiler end. This product is equipped with an advanced combustion device and is fully automated in operation. After the burner ignites the fuel, flame fills the round coil tubes and transfers heat by radiation through the tube wall (first pass). The high temperature flue gas gathers at the back door and then turns to the convection tubes section (second pass), where heat transfer takes place by convection. The flue gas gradually cools down here and flows to the front door, where it is reversed and goes into the third pass. After that, it enters into the chimney through the economizer and is released into the atmosphere.
Thermal Oil Boiler (Heater) System
This thermic fluid heater has advanced program control system, equipped with liquid level controller , pressure controller, temperature controller, and alarms to make sure the boiler work orderly and safe. So it is a kind of safe boiler with high efficiency and low power consumption.

Its advantage is Free-Installation

The complete boiler system is well skid-mounted on the basement, also we have done the pipe(valves) connection and wire connection. After receiving the boiler, user no need to do installation, just filling the thermal fluid oil, join the fuel and electricity. Entire boiler system is portable.

Characteristics of heat-conducting oil boiler
1. The seal between the burner interface and the tube plate adopts a labyrinth type, which has good sealing performance and large expansion space, which prolongs the service life of the burner and improves the thermal efficiency.
2. The thermic fluid heater adopts two-coil structure, three-pass flue gas, compact design, saving space, adding air preheater, and thermal efficiency up to 92% or more.
3. Various operation safety protections make the boiler operation safer and simpler, with high temperature control accuracy (±1ºC) and good combustion effect.
4. The automatic control function is adopted to prolong the service life of the equipment while saving human resources.
5. Hot Oil Boiler can obtain a higher working temperature under a lower operating pressure, and has the technical characteristics of low pressure and high temperature.
6. It has complete operation control and safety monitoring devices, easy to operate, safe and reliable.
7. It can realize stable heating and precise temperature adjustment to meet different requirements
8. The thermal oil boiler has good thermal insulation, adopts high-efficiency thermal insulation materials and advanced construction technology, and has low heat dissipation loss on the furnace wall

Owing to its characteristics of high heating temperature, low working pressure, and energy saving, the oil fired thermal fluid heater could be widely used in a variety of industrial heating process.

1) Textile industry - dyeing machine, drying rooms, high temperature machine, resin setting machine.

2) Food industry - cooking, drying, vegetable oil refining.

3) Chemical industry - oil chemistry, polymer industry, reaction tanks, distillation, concentration.

4) Plastics industry - plastics fired, extruded shape.

5) Rubber industry - hot press, hot extent, extrusion, vulcanization molding, injection, etc.

6) Paper industry - drying, corrugated paper processing, calender, glue roller.

7) Wood industry - hot processing, heat setting.

8) Machinery industry - drying, assembly processing

9) Building materials industry - plasterboard drying, asphalt heating, emulsified asphalt, asphalt concrete, concrete component maintenance, etc.

10)Synthetic fiber industry: polymerization, melting, spinning, extension, dry 

1.What are the heat-resistance temperature of grate and furnace?